Home > Research > Researchers > Professor Allan Rennie > Publications

Research

Professor Allan Rennie

Professor in Manufacturing Engineering & Director of Engagement

51 - 100 out of 246Page size: 50
RSS feed of this list
  1. 2019
  2. Published

    Tool Life Performance of Injection Mould Tooling Fabricated by Selective Laser Melting for High-Volume Production

    El Kashouty, M., Rennie, A. & Ghazy, M., 26/11/2019, In: Materials. 12, 23, 23 p., 3910.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  3. Published

    Experimental Platform to Facilitate Novel Back Brace Development for the Improvement of Spine Stability

    Cooper, L., Gullane, A., Harvey, J., Hills, A., Zemura, M., Martindale, J., Rennie, A. & Cheneler, D., 16/09/2019, In: Computer Methods in Biomechanics and Biomedical Engineering. 22, 15, p. 1163-1173 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  4. Published

    TecHUB 4.0 - Technology and Entrepreneurship Education for Bridging the Gap in Smart Product Development

    Ulmeanu, M., Doicin, C., Roșca, L., Rennie, A., Abram, T. & Bajdor, P., 21/08/2019, MATEC Web of Conferences. Bondrea, I., Cofaru, N. F. & Intă , M. (eds.). Sibiu, Romania: EDP Sciences, Vol. 290. 9 p. 13012

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  5. Published

    Mechanical collision simulation of potato tubers

    Celik, H. K., Cinar, R., Yilmaz, D., Ulmeanu, M.-E., Rennie, A. E. W. & Akinci, I., 1/08/2019, In: Journal of Food Process Engineering. 42, 5, 7 p., e13078.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  6. Published

    Social Design Fiction. New Methods for the Design of Emerging Technology.

    Pilling, M., Richards, D., Dunn, N. & Rennie, A., 31/05/2019, In: The Design Journal. 22, sup1, p. 1993-2005 13 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  7. Published

    Requirements for large-scale adoption of rapid manufacturing technologies

    Hasan, S., Rennie, A., Hoque, M. R. & Ahmed, N., 24/05/2019, In: Cogent Business & Management. 6, 1, 22 p., 1623151.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  8. Published

    Characterizing the fluid flow for Dixon Rings random packing

    Aiouache, F., Abdelraouf, M., Najdanovic‐Visak, V. & Rennie, A., 21/05/2019.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review

  9. Published

    Minimal Waste Galvonometer Field Correction for Additive Manufacturing

    King, B., Bennett, G. R. & Rennie, A., 5/04/2019, 16th Rapid Design, Prototyping & Manufacturing Conference (RDPM2019): Proceedings of the. Rennie, A., Pei, E. & Hackney, P. (eds.). 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  10. Published

    Multivariable Regression Analysis for Optimised Mass Calculation of MEX 3D Printed Parts

    Doicin, C.-V., Ulmeanu, M.-E., Rennie, A. & Lupeanu, E., 5/04/2019, 16th Rapid Design, Prototyping & Manufacturing Conference (RDPM2019). Rennie, A., Pei, E. & Hackney, P. (eds.). 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  11. Published

    Repurposing of metal support structures to form powder for use in additive manufacturing

    Powell, D., Rennie, A., Molyneux, A., Burns, N. & Geekie, L., 5/04/2019, 16th Rapid Design, Prototyping & Manufacturing Conference (RDPM2019): Proceedings of the. Rennie, A., Pei, E. & Hackney, P. (eds.). 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  12. Published

    A potential research area under shadow in engineering: Agricultural machinery design and manufacturing

    Celik, K., Rennie, A. & Akinci, I., 28/03/2019. 1 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract

  13. 2018
  14. Published

    Improved Tracheostomy Device

    Laha, S. (Inventor), Adiele, A. C. (Inventor), Brewer, D. (Inventor), Ntelis, T. (Inventor), Pitman, S. (Inventor), Rennie, A. (Inventor) & Sheikh, Y. (Inventor), 8/11/2018, IPC No. A61M 16/04 (2006.01), Patent No. PCT/GB2018/051193, 3/05/2018, Priority date 3/05/2017, Priority No. 1707060.8

    Research output: Patent

  15. Published

    Determination of Time Dependent Stress Distribution on a Potato Tuber during Drop Case

    Caglayan, N., Oral, O., Celik, H. K., Cinar, R., Rodrigues, L. C. D. A., Rennie, A. E. W. & Akinci, I., 11/2018, In: Journal of Food Process Engineering. 41, 7, 7 p., e12869.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  16. Published

    Determination of the Failure Susceptibility of a Flat Die used in Biomass Pelletizing Machines by means of FEA based Design Exploration

    Celik, H. K., Yilmaz, H., Rennie, A. E. W., Cinar, R. & Firat, M. Z., 10/2018, In: Journal of Failure Analysis and Prevention. 18, 5, p. 1099-1110 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  17. Published

    A Short Review on 4D Printing

    Khan, F., Celik, H. K., Oral, O. & Rennie, A. E. W., 07/2018, In: International Journal of 3D Printing Technologies and Digital Industry. 2, 2, p. 59-67 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  18. Published

    Rotation Rectilinear Scan Path Generation for Selective Laser Sintering

    King, B. A. T., Rennie, A. E. W., Taylor, J. P. & Walsh, S. M. R., 21/06/2018, Assises Europeennes de la Fabrication Additive.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  19. Published

    University Brand Management through Additive Manufacturing Applications

    Doicin, C.-V., Ulmeanu, M.-E., Abram, T. N., Rennie, A. E. W., Cîtu , D., Murzac, R., Tunsoiu, N. & Bărbării, N., 1/06/2018, Proceedings of the 31st IBIMA Conference. Milan, Italy, p. 6716-6727 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  20. Published

    Finite Element Analysis of a PTO Shaft Used in an Agricultural Tractor

    Celik, H. K., Cinar, R., Kunt, G., Rennie, A. E. W., Ucar, M. & Akinci, I., 15/05/2018, In: Ergonomics International Journal. 2, 3, 6 p., 000147.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  21. Published

    Finite Element Analysis of a PTO Shaft used in an Agricultural Tractor

    Celik, H. K., Cinar, R., Rennie, A. E. W., Ucar, M. & Akinci, I., 22/04/2018, p. 213-213. 1 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review

  22. Published

    A Short Review on 4D Printing

    Khan, F., Celik, H. K., Oral, O. & Rennie, A. E. W., 04/2018, 3rd International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry 2018. Çetinkaya, K., Özsoy, K., Duman, B. & Kayaalp, K. (eds.). Antalya, Turkey, p. 199-203 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract

  23. Published

    Determination of Time Dependent Stress Distribution on Potato Tubers at Mechanical Collision

    Celik, H. K., Cinar, R., Rennie, A. E. W., Ulmeanu, M.-E. & Akinci, I., 04/2018, CIGR 2018: XIX World Congress of CIGR: "Sustainable Life for Children". Akinci, I., Aykas, E. & Güngör , Ö. (eds.). Antalya, Turkey, p. 123 1 p. OP-081 [Section VI: Bioprocesses]

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract

  24. 2017
  25. Published

    Post Processing Treatments on Laser Sintered Nylon 12

    King, B. A. T., Rennie, A. E. W., Taylor, J. P. & Bennett, G. R., 8/12/2017, Solid Freeform Fabrication 2017: Proceedings of the 28th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference. The Minerals, Metals & Materials Society (TMS), p. 1464-1471 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  26. Published

    Fuzzy Logic Based Ventilation for Controlling Harmful Gases in Livestock Houses

    Celik, H. K., Rennie, A. E. W. & Caglayan, N., 12/2017, In: Journal of Agricultural Machinery Science. 13, 2, p. 107-112 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  27. Published

    New Tracheostomy Device Concept: An Additive Manufacturing Challenge in Reducing Late Clinical Complications

    Ulmeanu, M.-E., Ulmeanu, L., Doicin, C.-V., Rennie, A. E. W. & Lupeanu, E., 11/2017, Proceedings of the 30th International Business Information Management Association Conference: Vision 2020: Sustainable Economic development, Innovation Management, and Global Growth. Soliman, K. S. (ed.). Madrid, Spain: International Business Information Management Association (IBIMA), p. 2611-2622 12 p. #538

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  28. Published

    Nonlinear FEM based high-speed shell shattering simulation for shelled edible agricultural products: Pecan fruit shattering

    Celik, H. K., Caglayan, N. & Rennie, A. E. W., 10/2017, In: Journal of Food Process Engineering. 40, 5, 8 p., e12520.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  29. Published

    Fuzzy Logic Based Ventilation for Controlling Harmful Gases in Livestock Houses

    Caglayan, N., Celik, H. K. & Rennie, A. E. W., 09/2017. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  30. Published

    Comparison of Galvanometer and Polygon Scanning Systems on Component Production Rates in Selective Laser Sintering

    King, B., Rennie, A. E. W. & Bennett, G. R., 27/04/2017. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  31. Published

    Designing Digital Materials with Volumetric Gradients

    Richards, D. C., Abram, T. N. & Rennie, A. E. W., 27/04/2017. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  32. Published

    Time-Dependant Human Mastication Simulation of Agricultural Products and Its Rapid Prototyping Aided Evaluation: A Case Study for Pecan Kernel Mastication

    Celik, H. K., Rennie, A. E. W., Er, K., Abram, T. N. & Akinci, I., 27/04/2017. 10 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  33. Published

    Utilising Multi-Material PolyJet Additive Manufacturing for the Design and Fabrication of Prototype Flood Protection Door Seals

    Walsh, S. M. R., Rennie, A. E. W., Abram, T. N., Snape, M. & Roberts, L., 27/04/2017. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  34. Published

    Design and structural optimisation of a tractor mounted telescopic boom crane

    Celik, H. K., Rennie, A. E. W. & Akinci, I., 03/2017, In: Journal of the Brazilian Society of Mechanical Sciences and Engineering. 39, 3, p. 909-924

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  35. Published

    Reverse engineering approach for precise measurement of the physical attributes related to the geometric features of agricultural products

    Celik, H. K., Rennie, A. E. W. & Akinci, I., 03/2017, In: Journal of Food Measurement and Characterization. 11, 1, p. 75-84 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  36. Published

    Directing self-assembly to grow adaptive physical structures

    Blaney, A., Dunn, N. S., Alexander, J. M., Richards, D., Rennie, A. E. W. & Anwar, J., 8/02/2017, In: International Journal of Rapid Manufacturing. 6, 2-3, p. 114-133 20 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  37. Published

    Editorial: Rapid Design, Prototyping and Manufacturing

    Bibb, R. (Guest editor) & Rennie, A. E. W. (Guest editor), 01/2017, In: International Journal of Rapid Manufacturing. 6, 2-3, p. 95-96 2 p.

    Research output: Contribution to Journal/Magazine › Editorial › peer-review

  38. 2016
  39. Published

    3D printed facial laser scans for the production of localised radiotherapy treatment masks

    Briggs, M., Clements, H., Wynne, N., Rennie, A. E. W. & Kellett, D., 10/2016, In: Journal of Visual Communication in Medicine. 39, 3-4, p. 99-104 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  40. Published

    Pressure determination approach in specific pressure region and FEM based stress analysis of the housing of an external gear pump

    Cinar, R., Ucar, M., Celik, K., Firat, M. Z. & Rennie, A., 04/2016, In: Experimental Techniques. 40, 2, p. 489-499 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  41. Published

    Pressure Drop and Velocity Simulations in Non-Stochastic Structures - Filters Fabricated by Additive Manufacturing

    Hasib, H., Rennie, A. E. W., Burns, N. & Geekie, L., 04/2016, In: Filtration. 16, 2, p. 97-102 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  42. Published

    Designing advanced filtration media through metal additive manufacturing

    Burns, N., Burns, M., Travis, D., Geekie, L. & Rennie, A. E. W., 03/2016, In: Chemical Engineering and Technology. 39, 3, p. 535-542 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  43. Published

    Coupling self-assembling materials with digital designs to grow adaptive structures

    Blaney, A., Alexander, J., Dunn, N., Richards, D., Doursat, R., Rennie, A. & Anwar, J., 2016.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  44. Published

    Proceedings of the 14th Rapid Design, Prototyping and Manufacturing Conference

    Rennie, A. E. W. (Editor) & Bibb, R. (Editor), 2016, Lancaster: Lancaster University. 165 p.

    Research output: Book/Report/Proceedings › Proceedings

  45. 2015
  46. Published

    Adaptive materials: utilising additive manufactured scaffolds to control self-organising material aggregation

    Blaney, A., Alexander, J. M., Dunn, N. S., Richards, D. C., Rennie, A. E. W. & Anwar, J., 12/2015, Proceedings of the 14th Rapid Design, Prototyping and Manufacturing Conference. Rennie, A. & Bibb, R. (eds.). Loughborough: Lancaster University, p. 49-57 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  47. Published

    Multi-material additive manufacture of multi-layer ceramic capacitors

    King, B. A. T., Rowan, B., Williams, C., Williams, L., Tubby, D., Rennie, A. E. W. & Dennison, K., 12/2015, p. 79-85. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  48. Published

    Pressure drop and velocity simulations in non-stochastic lattice structure for filter applications fabricated using additive manufacturing

    Hasib, H., Rennie, A. E. W., Burns, N. & Geekie, L., 12/2015. 8 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  49. Published

    Simulation of flow characteristics for filters designed with a non-stochastic lattice structure fabricated via additive manufacturing

    Hasib, H., Rennie, A. E. W., Burns, N. & Geekie, L., 12/2015, p. 153-158. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  50. Published

    An investigation into the use of additive manufacture for the production of metallic bipolar plates for polymer electrolyte fuel cell stacks

    Dawson, R., Patel, A., Rennie, A. & White, S., 07/2015, In: Journal of Applied Electrochemistry. 45, 7, p. 637-645 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  51. Published

    Effect of process conditions on temperature distribution in the powder bed during laser sintering of polyamide-12

    Nelson, J. A., Rennie, A., Abram, T., Bennett, G. R., Adiele, A., Tripp, M., Wood, M. & Galloway, G., 07/2015, In: Journal of Thermal Engineering. 1, 3, p. 159-165 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  52. Published

    Deformation simulation of a tyre safety cage in testing of agricultural vehicle tyres

    Celik, H. K., Rennie, A. E. W., Dawson, D., Eatough, A., Eatough, J. & Akinci, I., 05/2015, Environmentally Friendly Agriculture and Forestry for Future Generations: International Scientific XXXVI CIOSTA & CIGR Section V Conference 2015. Popov, V. D., Belyakov, V. V., Efimov, V. A., Selikhovkin, A. V., Shirokov, S. N., Ovchinnikova, E. I., Maksimov, D. A., Levchenko, L. V., Smelik, V. A., Ruzhev, V. A., Korostelev, A. A., Lepp, N. V., Shaytarova, O. E. & Belinskaya, I. V. (eds.). St Petersburg, Russian Federation: Saint Petersburg State Agrarian University, p. 172-183 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  53. Published

    The lost crown of Horus

    Kaufman, J. & Rennie, A. E. W., 04/2015, Ancient Egypt, 15, 5, p. 22-23 2 p.

    Research output: Contribution to specialist publication › Article

  54. Published

    Reverse engineering using close range photogrammetry for additive manufactured reproduction of Egyptian artefacts and other objets d'art

    Kaufman, J., Rennie, A. & Clement, M., 1/03/2015, In: Journal of Computing and Information Science in Engineering. 15, 1, 7 p., 011006.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  55. Published

    Comparative evaluation of optimum additive manufacturing technology to fabricate medical bespoke prototypes obtained with composite materials

    Ulmeanu, M., Doicin, C., Baila, D., Rennie, A. E. W., Neagu, C. & Laha, S., 03/2015, In: Revista de Materiale Plastice. 52, 3, p. 416-422 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1 2 3 4 5 Next

Back to top