Home > Research > Researchers > Professor Allan Rennie > Publications

Research

Professor Allan Rennie

Professor in Manufacturing Engineering & Director of Engagement

151 - 175 out of 246Page size: 25
RSS feed of this list
  1. 2011
  2. Published

    Surface finishing techniques for SLM manufactured stainless steel 316L components

    Morton, W., Green, S., Rennie, A. & Abram, T., 10/2011, Innovative Developments in Virtual and Physical Prototyping: Proc. of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping. CRC PRESS-TAYLOR & FRANCIS GROUP, p. 503-509 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  3. Published

    Variable fused deposition modelling: analysis of benefits, concept design and tool path generation

    Brooks, H., Rennie, A., Abram, T., McGovern, J. & Caron, F., 10/2011, Innovative Developments in Virtual and Physical Prototyping: Proceedings of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping. CRC PRESS-TAYLOR & FRANCIS GROUP, p. 511-517 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  4. Published

    Determination of flow parameters through CFD analysis for agricultural irrigation equipment: a case study for a mini valve

    Celik, K., Rennie, A., Karayel, D. & Akinci, I., 09/2011, In: Journal of Agricultural Machinery Science. 7, 3, p. 231-239 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  5. Published

    Determination of flow parameters through CFD analysis for agricultural irrigation equipment: a case study for a mini valve

    Celik, H. K., Rennie, A., Karayel, D. & Akinci, I., 09/2011, p. 59. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  6. Published

    Opportunities offered by additive manufacturing in creative businesses: informing designers

    Anthony, R., Evans, M., Rennie, A. & Kirby, E., 09/2011, 13th International Conference on Engineering & Product Design Education (EPDE 11). p. 623-628 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  7. Published

    Geometry Optimisation of Tools used in Milling of Spherical Surfaces

    Neagu, C., Lupeanu, M. & Rennie, A., 07/2011, SIM2011 - Sustainable Intelligent Manufacturing : Proceedings of the 1st International Conference on Sustainable Intelligent Manufacturing. Bartolo, H. (ed.). Leiria, Portugal, p. 87-94 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  8. Published

    Sizing Optimisation of a Subsoiler Framework using Advanced Engineering Tools

    Celik, K., Rennie, A., Topakci, M. & Akinci, I., 07/2011, Proceedings of the XXXIV CIOSTA CIGR V Conference 2011: Efficient and safe production processes in sustainable agriculture and forestry. 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  9. Published

    A Basic Design-Build-Test Experience: Model Wind Turbine using Additive Manufacture

    Widden, M., Rennie, A., Quayle, S. & Gunn, K., 23/06/2011, Conference proceedings 7th International CDIO Conference, Technical University of Denmark, 20th – 22nd June 2011. Technical University of Denmark, p. 1039-1048 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  10. Published

    Additive manufacturing technologies and functional analysis used in product development optimization

    Lupeanu, M., Rennie, A. & Neagu, C., 06/2011, Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 105-112 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  11. Published

    Deformation simulation of additive manufacturing FDM parts: a case study for greenhouse clips

    Celik, H. K., Hambali, R. H., Rennie, A. & Akinci, I., 06/2011, Rapid Design Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 155-162 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  12. Published

    Optimisation of build orientation for FDM additive manufactured products

    Hambali, R. H., Vaudelin, M. & Rennie, A., 06/2011.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review

  13. Published

    Polarities of function and form using additive manufacturing - where the middle ground might be in achieving a creative balance for SMEs

    Kaufman, J., Rennie, A. & Quayle, S., 06/2011, Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 135-143 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  14. Published

    Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on

    Rennie, A. (Editor) & Bocking, C. E. (Editor), 06/2011, CRDM Ltd. 203 p.

    Research output: Book/Report/Proceedings › Book

  15. Published

    Redesign of custom-fitted surgical guide with targeted functional analysis fabricated via SLM

    Lupeanu, M., Rennie, A., Eggbeer, D. & Neagu, C., 06/2011, Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 173-181 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  16. Published

    Variable Fused Deposition Modelling – Concept Design and Tool Path Generation

    Brooks, H., Rennie, A., Abram, T., McGovern, J. & Caron, F., 06/2011, Rapid Design, Prototyping and Manufacturing: Proc Twelfth Conference on. p. 113-122 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  17. Published

    Deformation behaviour simulation of an apple under drop case by finite element method

    Celik, H. K., Rennie, A. & Akinci, I., 05/2011, In: Journal of Food Engineering. 104, 2, p. 293-298 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  18. Published

    An investigation into the environmental impact of product recovery methods to support sustainable manufacturing within small and medium-sized enterprises (SMEs)

    Appleby, M., Lambert, C., Rennie, A. & Buckley, A., 04/2011, In: International Journal of Manufacturing, Materials, and Mechanical Engineering (IJMMME). 1, 2, p. 1-18 18 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  19. Published

    Rapid prototyping and flow simulation applications in design of agricultural irrigation equipment: Case study for a sample in-line drip emitter: The paper is to study CFD and RP application samples on the design issues associated with agricultural irrigation equipment

    Celik, K., Karayel, D., Caglayan, N., Rennie, A. & Akinci, I., 03/2011, In: Virtual and Physical Prototyping. 6, 1, p. 47-56 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  20. Published

    Product Optimization by Rapid Manufacturing and Targeted Functional Analysis

    Lupeanu, M., Rennie, A., Neagu, C. & Celik, K., 2011, 16th European Forum on Rapid Prototyping and Manufacturing: Proceedings of the. 14 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  21. Published

    Selective laser melting for near net-shape manufacturing: Investigation into structure-parameter relationships and phase determination by X-ray diffraction in stainless steel alloy systems

    Green, S., OMeara, N. & Rennie, A., 2011. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  22. 2010
  23. Published

    Computer aided material selection for additive manufacturing materials

    Smith, P. & Rennie, A., 12/2010, In: Virtual and Physical Prototyping. 5, 4, p. 209-213 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  24. Published

    Rapid design, prototyping and manufacturing

    Rennie, A., Aitchison, D. (Editor) & Jacobson, D. M., 12/2010, In: Virtual and Physical Prototyping. 5, 4, p. 181-181 1 p.

    Research output: Contribution to Journal/Magazine › Editorial

  25. Published

    Modal analysis of agricultural machineries using finite element method: a case study for a V-belt pulley of a fodder crushing machine

    Celik, H. K., Topakci, M., Canakci, M., Rennie, A. & Akinci, I., 12/11/2010, In: Journal of Food, Agriculture and Environment. 8, 3-4, p. 439-446 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  26. Published

    Effect of build orientation on FDM parts: a case study for validation of deformation behaviour by FEA

    Hambali, R. H., Celik, K., Smith, P., Rennie, A. & Ucar, M., 09/2010, International Conference on Design and Concurrent Engineering (iDECON 2010): Manufacturing Challenges Towards Global Sustainability. Penerbit Universiti (UTeM), p. 224-228 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  27. Published

    Skills development of employees at SMEs in the construction sector in the North of England

    Ganah, A. & Rennie, A., 09/2010, The Construction, Building and Real Estate Research Conference of the Royal Institution of Chartered Surveyors (COBRA 2010): Proceedings of. Royal Institution of Chartered Surveyors (RICS), 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Previous 1...3 4 5 6 7 8 9 10 Next

Back to top