Home > Research > Researchers > Professor Sarah Green > Publications

Research

Professor Sarah Green CEng CEnv FHEA FIMMM FWES

Visiting Researcher

51 - 92 out of 92Page size: 50
RSS feed of this list
  1. Published

    Wear performance of silastic prostheses tested on a novel metatarsophalangeal joint simulator

    Green, S., Lee, S., Joyce, T. & Unsworth, A., 2006, p. 35. 1 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  2. Published

    Selective laser melting for near net-shape manufacturing: Investigation into structure-parameter relationships and phase determination by X-ray diffraction in stainless steel alloy systems

    Green, S., OMeara, N. & Rennie, A., 2011. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  3. Published

    Motivation of engineering students-considerations for programme design

    Green, S. & Meyer, JRF., 2010, p. P062. 9 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  4. Published

    Restrained creep of CMW2000 Bone Cement

    Green, S., Liu, C., Watkins, N. D., McCaskie, A. W. & Gregg, P. J., 2002, p. T84. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  5. Published

    The morphology of UHMWPE wear debris released from shoulder prostheses

    Green, S., Elfick, A. P., Frostick, S. P. & Unsworth, A., 2002, p. 105. 1 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  6. Published

    Wear evaluation of retrieved, failed uncemented UHMWPE prostheses

    Green, S., Mahomed, A., Cloke, D. J., Chuter, G. S. J. & Partington, P. F., 2006, p. T95. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review

  7. Published

    Design and development of a novel multistation MTP joint simulator for in vitro testing

    Green, S., Lee, S., Joyce, T. & Unsworth, A., 2006, p. P137.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  8. Published

    Deformation of materials

    Green, S. M., 02/2006, In: Current Orthopaedics. 20, 1, p. 9-15 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  9. Published

    Ion beam modification of Ti6Al4V alloy for TJR

    Green, S., Boampong, D. K. & Unsworth, A., 2002, p. L68.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  10. Published

    Migration of a cemented hip joint prosthesis within a novel composite femur

    Green, S., Gregg, P., Liu, C., Watkins, N. D. & McCaskie, A. W., 2002, International conference engineers & surgeons - joined at the hip : refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. C601

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  11. Published

    AFM measurement of nanoscale topographical and material wear features

    Green, S., Elfick, A. P. & Unsworth, A., 2002, International conference engineers & surgeons - joined at the hip: refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. C601/032

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  12. Published

    The influence of radial clearance and wear testing on the tribology of alumina-alumina total hip prostheses

    Green, S., Scholes, S. C. & Unsworth, A., 2002, International conference engineers & surgeons - joined at the hip: refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. C601/037

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  13. Published

    Nanoscale wear degradation of alumina femoral head bearing surfaces assessed using an atomic force microscope

    Green, S., Scholes, S. C. & Unsworth, A., 2002, International conference engineers & surgeons - joined at the hip: refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. C601/036

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  14. Published

    On the influence of protein adsorption to phagocytosis of model polyethylene particles

    Green, S., Elfick, A. P., Birch, M. A. & McCaskie, A. W., 2002, International conference engineers & surgeons - joined at the hip : refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. L27

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  15. Published

    Cytocompatibility evaluation of surface modified Ni-Ti shape memory alloy using the MTT assay

    Green, S. M., Grant, D. M. & Wood, J. V., 25/04/2000, In: Biomedical Engineering - Applications, Basis and Communications. 12, 2, p. 55-59 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  16. Published

    The surface performance of shot peened and ion implanted NiTi shape memory alloy

    Grant, D. M., Green, S. M. & Wood, J. V., 03/1995, In: Acta Metallurgica et Materialia. 43, 3, p. 1045-1051 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  17. Published

    A novel technique for the detailed size characterization of wear debris.

    Elfick, A. P., Green, S. M., Pinder, I. M. & Unsworth, A., 05/2000, In: Journal of Materials Science: Materials in Medicine. 11, 5, p. 267-271 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  18. Published

    The nature and dissemination of UHMWPE wear debris retrieved from periprosthetic tissue of THR.

    Elfick, A. P. D., Green, S. M., Krikler, S. & Unsworth, A., 1/04/2003, In: Journal of Biomedical Materials Research Part A. 65, 1, p. 95-108 14 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  19. Published

    The quantitative assessment of UHMWPE wear debris produced in hip simulator testing: the influence of head material and roughness, motion and loading.

    Elfick, A. P. D., Smith, S. L., Green, S. M. & Unsworth, A., 06/2001, In: Wear. 249, 5-6, p. 517-527 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  20. Published

    A re-appraisal of wear features of acetabular sockets using atomic force microscopy.

    Elfick, A. P. D., Smith, S. L., Green, S. M. & Unsworth, A., 10/2002, In: Wear. 253, 7-8, p. 839-847 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  21. Published

    Opsonization of polyethylene wear particles regulates macrophage and osteoblast responses in vitro

    Elfick, A. P. D., Green, S. M., McCaskie, A. W. & Birch, M. A., 15/11/2004, In: Journal of Biomedical Materials Research Part B: Applied Biomaterials. 71B, 2, p. 244-251 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  22. Published

    The agglomeration of polyethylene particles in the cell culture environment

    Elfick, A. P. D., Green, S. M., McCaskie, A. & Birch, M., 1/12/2004, Transactions - 7th World Biomaterials Congress. 1 p. (Transactions - 7th World Biomaterials Congress).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  23. Published

    The influence of opsonins on cellular reaction to polyethylene wear particles

    Elfick, A., Birch, M., Green, S. & McCaskie, A., 1/12/2002, In: European Cells and Materials. 4, SUPPL. 2, 1 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  24. Published

    Grain Secondary Recrystallisation in Advanced Gas Cooled Reactor Fuel Cladding: Characterisation and Modelling

    Degueldre, C., Wilbraham, R., Fahy, J. & Green, S., 1/01/2021, In: Journal of Nuclear Materials. 543, 14 p., 152633.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  25. Published

    Short life fission products extracted from molten salt reactor fuel for radiopharmaceutical applications

    Degueldre, C., Findlay, J., Cheneler, D., Sardar, S. & Green, S., 31/03/2024, In: Applied Radiation and Isotopes. 205, 111146.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  26. Published

    Wear analysis of failed acetabular polyethylene: a comparison of analytical methods

    Chuter, G. S. J., Cloke, D. J., Mahomed, A., Partington, P. F. & Green, S. M., 02/2007, In: Journal of Bone and Joint Surgery, British Volume. 89B, 2, p. 273-279 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  27. Published

    MATERIALS TESTING AND VOLUMETRIC ANALYSIS OF EXPLANTED ABG I CUP INSERTS

    Chuter, G. S. J., Cloke, D. J., Green, S. M. & Partington, P. F., 1/05/2006, In: Journal of Bone and Joint Surgery, British Volume. 88-B, SUPP II, p. 246 1 p.

    Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review

  28. Published

    Engineering FEA Sintering Model Development for Metal Supported SOFC

    Chatzimichail, R., Dawson, R. J., Green, S. M., Sullivan, D., Mukerjee, S. & Selby, M., 23/07/2017, In: ECS Transactions. 78, 1, p. 2773-2783 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  29. Published

    Validation of Engineering FEA Predictive Sintering Models of Steel Supported SOFCs

    Chatzimichail, R., Dawson, R. J., Green, S. M., Sullivan, D., Selby, M. & Mukerjee, S., 3/07/2018, Proceedings of the 13th European SOFC & SOE Forum 2018 .

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  30. Published

    DOES THE CLINICAL ENVIRONMENT INFLUENCE THE PROPERTIES OF BONE CEMENT?

    Burt, N., Green, S. M., Sandher, D. S. & Gregg, P. J., 1/01/2003, In: Journal of Bone and Joint Surgery, British Volume. 85-B, SUPP I, p. 13-14 2 p.

    Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review

  31. Published

    A BIOMECHANICAL COMPARISON OF DIFFERENT SCREW CONFIGURATIONS IN DISTAL TIBIAL LOCKING PLATES

    Bonner, T. J., Green, S. M. & McMurty, I. A., 1/04/2012, In: Journal of Bone and Joint Surgery, British Volume. 94-B, SUPP XXXV, p. 20 1 p.

    Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review

  32. Published

    N+ ion implantation of Ti6Al4V alloy and UHMWPE for total joint replacement application.

    Boampong, D. K., Green, S. M. & Unsworth, A., 2003, In: Journal of Applied Biomaterials and Biomechanics. 1, p. 164-171 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  33. Published

    Comparison of cement pressurisation in flanged and unflanged acetabular cups

    Bhattacharya, R., Attar, F. G., Green, S. & Port, A., 3/02/2012, In: Journal of Orthopaedic Surgery and Research. 7, 1, 5 p., 5.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  34. Published

    Biomechanical testing of the locking compression plate: When does the distance between bone and implant significantly reduce construct stability?

    Ahmad, M., Nanda, R., Bajwa, A. S., Candal-Couto, J., Green, S. & Hui, A. C., 03/2007, In: Injury. 38, 3, p. 358-364 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  35. Published

    Pneumatic fluid structure interaction of inflatable offshore fender barriers made of anisotropic hyperelastic composites

    Aboshio, A., Ye, J. & Green, S., 2013, Proceedings of the 17th International Conference on Composite Structures, Porto, Portugal, 17-21 June 2013.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  36. Published

    Dynamic Response of Inflatable Offshore Fender Barrier Structures under Impact Loading

    Aboshio, A., Green, S. & Ye, J., 09/2013, Proceedings of the 14th International Conference on Civil, Structural and Environmental Engineering Computing, CC 2013. Topping, B. H. V. & Iványi, P. (eds.). Stirlingshire: Civil-Comp Press, 20 p. 148. (Civil-Comp Proceedings; vol. 102).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  37. Published

    Numerical validation and dynamic study of inflatable offshore barrier structures under impact loading

    Aboshio, A., Ye, J. & Green, S., 17/09/2013.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review

  38. Published

    Application of inflatable structures in offshore security

    Aboshio, A., Green, S. & Ye, J., 17/12/2013.

    Research output: Contribution to conference - Without ISBN/ISSN › Speech

  39. Published

    Experimental investigation of the mechanical properties of neoprene coated nylon woven reinforced composites

    Aboshio, A., Green, S. & Ye, J., 8/06/2014, Proceedings of the first international conference on mechanics of composites, Stony Brook University, New York.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  40. Published

    Structural performance assessment of a woven-fabric reinforced composite as applied in construction of inflatable offshore fender barrier structures

    Aboshio, A., Green, S. & Ye, J., 2015, In: International Journal of Structural Stability and Dynamics. 15, 1, 22 p., 1450036.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  41. Published

    New constitutive model for anisotropic hyperelastic biased woven fibre reinforced composite

    Aboshio, A., Green, S. & Ye, J., 09/2014, In: Plastics, Rubber and Composites. 43, 7, p. 225-234 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  42. Published

    Experimental investigation of the mechanical properties of neoprene coated nylon woven reinforced composites

    Aboshio, A., Green, S. & Ye, J., 02/2015, In: Composite Structures. 120, p. 386-393 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1 2 Next

Back to top