Home > Research > Researchers > Professor Sarah Green > Publications

Research

Professor Sarah Green CEng CEnv FHEA FIMMM FWES

Visiting Researcher

51 - 92 out of 92Page size: 50
RSS feed of this list
  1. 2005
  2. Published

    Dynamic creep and mechanical characteristics of SmartSet GHV bone cement

    Liu, C., Green, S., Watkins, N., Baker, D. & McCaskie, A., 01/2005, In: Journal of Materials Science: Materials in Medicine. 16, 2, p. 153-160 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  3. 2006
  4. Published

    Design and development of a novel multistation MTP joint simulator for in vitro testing

    Green, S., Lee, S., Joyce, T. & Unsworth, A., 2006, p. P137.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  5. Published

    Wear evaluation of retrieved, failed uncemented UHMWPE prostheses

    Green, S., Mahomed, A., Cloke, D. J., Chuter, G. S. J. & Partington, P. F., 2006, p. T95. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review

  6. Published

    Wear performance of silastic prostheses tested on a novel metatarsophalangeal joint simulator

    Green, S., Lee, S., Joyce, T. & Unsworth, A., 2006, p. 35. 1 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  7. Published

    Deformation of materials

    Green, S. M., 02/2006, In: Current Orthopaedics. 20, 1, p. 9-15 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  8. Published

    MATERIALS TESTING AND VOLUMETRIC ANALYSIS OF EXPLANTED ABG I CUP INSERTS

    Chuter, G. S. J., Cloke, D. J., Green, S. M. & Partington, P. F., 1/05/2006, In: Journal of Bone and Joint Surgery, British Volume. 88-B, SUPP II, p. 246 1 p.

    Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review

  9. Published

    A biomechanical study comparing a raft of 3.5 mm cortical screws with 6.5 mm cancellous screws in depressed tibial plateau fractures

    Patil, S., Mahon, A., Green, S., McMurtry, I. & Port, A., 06/2006, In: Knee. 13, 3, p. 231-235 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  10. Published

    OPTIMAL PROSTHESIS TEMPERATURE IN CEMENTED TOTAL HIP ARTHROPLASTY

    Jafri, A., Green, S. M., McCaskie, A. W., Partington, P. F. & Muller, S. D., 1/10/2006, In: Journal of Bone and Joint Surgery, British Volume. 88-B, SUPP III, p. 365 1 p.

    Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review

  11. Published

    ORTHOPAEDIC BIOPOLYMER WEAR SCREENING RIG VALIDATED AGAINST CLINICAL DATA

    Joyce, T. J., Monk, D., Thompson, P., Chiu, P., Unsworth, A. & Green, S. M., 1/10/2006, In: Journal of Bone and Joint Surgery, British Volume. 88-B, SUPP III, p. 377 1 p.

    Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review

  12. 2007
  13. Published

    Cement pressurisation in flanged and unflanged acetabular cups

    Green, S., Attar, F. G., Bhattacharya, R. & Port, A., 2007, Proceedings 8th EFORT Congress, Florence, Italy. Florence, Italy: European Federation of National Associations of Orthopaedics and Traumatology, p. P486

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  14. Published

    Fixation strength of cemented Birmingham (HA coated, cementless) cups - a biomechanical study

    Green, S., Kadakia, A. & Partington, P. F., 2007, Proceedings 8th EFORT congress, Florence, Italy. European Federation of National Associations of Orthopaedics and Traumatology

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  15. Published

    In vitro wear performance of MTP prostheses evaluated on a multi-station metatarso-phalangeal joint simulator

    Green, S., Joyce, T., Lee, S. & Unsworth, A., 2007, Proceedings 8th EFORT Congress. Florence, Italy: European Federation of National Associations of Orthopaedics and Traumatology, p. F837

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  16. Published

    Wear analysis of failed acetabular polyethylene: A comparison of analytical methods

    Green, S., Chuter, G. S. J., Cloke, D. J., Mohamed, A. & Partington, P. F., 2007, Proceedings 8th EFORT Congress, Florence. Florence, Italy: European Federation of National Associations of Orthopaedics and Traumatology

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  17. Published

    Wear analysis of failed acetabular polyethylene: a comparison of analytical methods

    Chuter, G. S. J., Cloke, D. J., Mahomed, A., Partington, P. F. & Green, S. M., 02/2007, In: Journal of Bone and Joint Surgery, British Volume. 89B, 2, p. 273-279 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  18. Published

    Biomechanical testing of the locking compression plate: When does the distance between bone and implant significantly reduce construct stability?

    Ahmad, M., Nanda, R., Bajwa, A. S., Candal-Couto, J., Green, S. & Hui, A. C., 03/2007, In: Injury. 38, 3, p. 358-364 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  19. Published

    Nucleation of CdTe thin films deposited by close-space sublimation under a nitrogen ambient

    Major, J. D., Proskuryakov, Y. Y., Durose, K. & Green, S., 31/05/2007, In: Thin Solid Films. 515, 15, p. 5828-5832 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  20. 2010
  21. Published

    Motivation of engineering students-considerations for programme design

    Green, S. & Meyer, JRF., 2010, p. P062. 9 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  22. 2011
  23. Published

    Selective laser melting for near net-shape manufacturing: Investigation into structure-parameter relationships and phase determination by X-ray diffraction in stainless steel alloy systems

    Green, S., OMeara, N. & Rennie, A., 2011. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  24. Published

    Surface finishing techniques for SLM manufactured stainless steel 316L components

    Morton, W., Green, S., Rennie, A. & Abram, T., 10/2011, Innovative Developments in Virtual and Physical Prototyping: Proc. of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping. CRC PRESS-TAYLOR & FRANCIS GROUP, p. 503-509 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  25. 2012
  26. Published

    Comparison of cement pressurisation in flanged and unflanged acetabular cups

    Bhattacharya, R., Attar, F. G., Green, S. & Port, A., 3/02/2012, In: Journal of Orthopaedic Surgery and Research. 7, 1, 5 p., 5.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  27. Published

    A BIOMECHANICAL COMPARISON OF DIFFERENT SCREW CONFIGURATIONS IN DISTAL TIBIAL LOCKING PLATES

    Bonner, T. J., Green, S. M. & McMurty, I. A., 1/04/2012, In: Journal of Bone and Joint Surgery, British Volume. 94-B, SUPP XXXV, p. 20 1 p.

    Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review

  28. 2013
  29. Published

    Pneumatic fluid structure interaction of inflatable offshore fender barriers made of anisotropic hyperelastic composites

    Aboshio, A., Ye, J. & Green, S., 2013, Proceedings of the 17th International Conference on Composite Structures, Porto, Portugal, 17-21 June 2013.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  30. Published

    Dynamic Response of Inflatable Offshore Fender Barrier Structures under Impact Loading

    Aboshio, A., Green, S. & Ye, J., 09/2013, Proceedings of the 14th International Conference on Civil, Structural and Environmental Engineering Computing, CC 2013. Topping, B. H. V. & Iványi, P. (eds.). Stirlingshire: Civil-Comp Press, 20 p. 148. (Civil-Comp Proceedings; vol. 102).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  31. Published

    Numerical validation and dynamic study of inflatable offshore barrier structures under impact loading

    Aboshio, A., Ye, J. & Green, S., 17/09/2013.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review

  32. Published

    Application of inflatable structures in offshore security

    Aboshio, A., Green, S. & Ye, J., 17/12/2013.

    Research output: Contribution to conference - Without ISBN/ISSN › Speech

  33. 2014
  34. Published

    Experimental investigation of the mechanical properties of neoprene coated nylon woven reinforced composites

    Aboshio, A., Green, S. & Ye, J., 8/06/2014, Proceedings of the first international conference on mechanics of composites, Stony Brook University, New York.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  35. Published

    New constitutive model for anisotropic hyperelastic biased woven fibre reinforced composite

    Aboshio, A., Green, S. & Ye, J., 09/2014, In: Plastics, Rubber and Composites. 43, 7, p. 225-234 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  36. Published

    Developing novel structural composites from recycled materials

    Sotayo, A., Green, S. & Turvey, G., 16/12/2014.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  37. 2015
  38. Published

    Structural performance assessment of a woven-fabric reinforced composite as applied in construction of inflatable offshore fender barrier structures

    Aboshio, A., Green, S. & Ye, J., 2015, In: International Journal of Structural Stability and Dynamics. 15, 1, 22 p., 1450036.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  39. Published

    Experimental investigation of the mechanical properties of neoprene coated nylon woven reinforced composites

    Aboshio, A., Green, S. & Ye, J., 02/2015, In: Composite Structures. 120, p. 386-393 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  40. Published

    Carpet recycling: a review of recycled carpets for structural composites

    Sotayo, A., Green, S. & Turvey, G., 04/2015, In: Environmental Technology and Innovation. 3, p. 97-107 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  41. 2016
  42. Published

    Experimental investigation of recycled carpet composites for barrier structures

    Sotayo, A., Green, S. M. & Turvey, G. J., 04/2016.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  43. Published

    Benchmark testing and Finite Element (FE) analysis of timber fencing for replacement by novel composite materials

    Sotayo, A., Green, S. M. & Turvey, G. J., 11/07/2016, Mechcomp2 2nd International Conference on Mechanics of Composites . Ferreira, A., Neves, A., Viola, E., Tornabene, F. & Fantuzzi, N. (eds.). Bologna: Editrice Esculapio

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  44. Published

    Experimental and Finite Element (FE) modelling of timber fencing for benchmarking novel composite fencing

    Sotayo, A., Green, S. M. & Turvey, G. J., 15/12/2016, In: Composite Structures. 158, p. 44-55 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  45. 2017
  46. Published

    Engineering FEA Sintering Model Development for Metal Supported SOFC

    Chatzimichail, R., Dawson, R. J., Green, S. M., Sullivan, D., Mukerjee, S. & Selby, M., 23/07/2017, In: ECS Transactions. 78, 1, p. 2773-2783 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  47. 2018
  48. Published

    Development, Characterisation and Finite Element Modelling of Novel Waste Carpet Composites for Structural Applications

    Sotayo, A., Green, S. & Turvey, G., 10/05/2018, In: Journal of Cleaner Production. 183, p. 686-697 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  49. Published

    Validation of Engineering FEA Predictive Sintering Models of Steel Supported SOFCs

    Chatzimichail, R., Dawson, R. J., Green, S. M., Sullivan, D., Selby, M. & Mukerjee, S., 3/07/2018, Proceedings of the 13th European SOFC & SOE Forum 2018 .

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  50. Published

    Mechanical properties of reinforced composite materials under uniaxial and planar tension loading regimes measured using a non-contact optical method

    Milad, M., Green, S. & Ye, J., 15/10/2018, In: Composite Structures. 202, p. 1145-1154 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  51. 2019
  52. Published

    Experimental investigation and Finite Element (FE) analysis of the load-deformation response of PVC fencing structures

    Sotayo, A., Green, S. M. & Turvey, G. J., 1/06/2019, In: structures. 19, p. 424-435 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  53. 2021
  54. Published

    Grain Secondary Recrystallisation in Advanced Gas Cooled Reactor Fuel Cladding: Characterisation and Modelling

    Degueldre, C., Wilbraham, R., Fahy, J. & Green, S., 1/01/2021, In: Journal of Nuclear Materials. 543, 14 p., 152633.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  55. Published

    Hybrid and adhesively bonded joints with dissimilar adherends: a critical review

    Yousefi Kanani, A., Green, S., Hou, X. & Ye, J., 30/09/2021, In: Journal of Adhesion Science and Technology. 35, 17, p. 1821-1859 39 p.

    Research output: Contribution to Journal/Magazine › Review article › peer-review

  56. 2024
  57. Published

    Short life fission products extracted from molten salt reactor fuel for radiopharmaceutical applications

    Degueldre, C., Findlay, J., Cheneler, D., Sardar, S. & Green, S., 31/03/2024, In: Applied Radiation and Isotopes. 205, 111146.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1 2 Next

Back to top