Home > Research > Publications & Outputs > Design and simulation of an integrated process ...

Links

Text available via DOI:

View graph of relations

Design and simulation of an integrated process for biodiesel production from waste cooking oil using supercritical methanolysis

Research output: Contribution to Journal/MagazineJournal articlepeer-review

Published
Close
<mark>Journal publication date</mark>15/10/2018
<mark>Journal</mark>Energy
Volume161
Number of pages9
Pages (from-to)299-307
Publication StatusPublished
Early online date23/07/18
<mark>Original language</mark>English

Abstract

Non-catalytic transesterification has been recognised as an effective technique for biodiesel production. It has many advantages over conventional catalytic transesterification, where it eliminates the difficulties of catalysts preparation and separation. It also produces high biodiesel yield in shorter reaction time. However, it requires harsh operating conditions at high reaction temperature and pressure, in addition to using large excess of methanol. In an attempt to mitigate these problems, a process design/integration for biodiesel production has been performed. The process has been subjected to both mass and energy integration to minimise fresh methanol requirements and to minimise heating and cooling energies, respectively. A new graphical Pinch Analysis method has been used to evaluate the energy performance of a literature design for the current process. It has been subsequently used to develop an optimum heat exchanger network (HEN) for the process by matching of process streams. Also, the design made by using an automated commercial simulation (Aspen Energy Analyzer) has been evaluated using the same graphical method. The produced HEN design from graphical method has achieved the optimum results with respect to energy targets.