Home > Research > Publications & Outputs > Generation, performance evaluation and control ...
View graph of relations

Generation, performance evaluation and control design of single-phase differential-mode buck–boost current-source inverters

Research output: Contribution to journalJournal articlepeer-review

Published
Close
<mark>Journal publication date</mark>08/2016
<mark>Journal</mark>IET Renewable Power Generation
Issue number7
Volume10
Number of pages12
Pages (from-to)916-927
Publication StatusPublished
<mark>Original language</mark>English

Abstract

Differential-mode inverter topologies are promising for renewable energy generation since they offer advantages such as passive elements sizes reduction, having decreased power losses and reduced total cost. Single phase buck–boost differential-mode current-source inverters (DMCSIs) can deliver wider range of output voltage above or below the input dc voltage, which is necessary for high-efficiency modern renewable energy applications. Since these inverters have continuous input currents, they are suitable for maximum power point tracking (MPPT) operation of photovoltaic systems. Yet, the investigation, operation and implementation of these types of inverters have not been extensively discussed. As a drawback, the total dc side input current of a single-phase inverter consists of a dc component and an undesirable ac component. This ac component frequency is double the output voltage frequency and thus it affects MPPT resulting in reduced total efficiency. In this study, five promising DMCSIs are proposed and compared in terms of their total efficiencies, high-frequency ripple current in the dc side, total harmonic distortion, devices sizes and ratings. Moreover, the sliding mode controller's design and possible methods of eliminating the input second harmonic current are discussed. 2.5 kW bidirectional inverters are implemented to confirm the design flexibility of the proposed DMCSIs.