Rights statement: © 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
Accepted author manuscript, 1.29 MB, PDF document
Available under license: CC BY-NC: Creative Commons Attribution-NonCommercial 4.0 International License
Final published version
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
}
TY - GEN
T1 - Hot or Not? Robust and Accurate Continuous Thermal Imaging on FLIR cameras
AU - Malmivirta, Titti
AU - Hamberg, Jonatan
AU - Lagerspetz, Eemil
AU - Li, Xin
AU - Peltonen, Ella
AU - Flores, Huber
AU - Nurmi, Petteri Tapio
N1 - © 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.
PY - 2019/3/11
Y1 - 2019/3/11
N2 - Wearable thermal imaging is emerging as a powerful and increasingly affordable sensing technology. Current thermal imaging solutions are mostly based on uncooled forward looking infrared (FLIR), which is susceptible to errors resulting from warming of the camera and the device casing it. To mitigate these errors, a blackbody calibration technique where a shutter whose thermal parameters are known is periodically used to calibrate the measurements. This technique, however, is only accurate when the shutter's temperature remains constant over time, which rarely is the case. In this paper, we contribute by developing a novel deep learning based calibration technique that uses battery temperature measurements to learn a model that allows adapting to changes in the internal thermal calibration parameters. Our method is particularly effective in continuous sensing where the device casing the camera is prone to heating. We demonstrate the effectiveness of our technique through controlled benchmark experiments which show significant improvements in thermal monitoring accuracy and robustness.
AB - Wearable thermal imaging is emerging as a powerful and increasingly affordable sensing technology. Current thermal imaging solutions are mostly based on uncooled forward looking infrared (FLIR), which is susceptible to errors resulting from warming of the camera and the device casing it. To mitigate these errors, a blackbody calibration technique where a shutter whose thermal parameters are known is periodically used to calibrate the measurements. This technique, however, is only accurate when the shutter's temperature remains constant over time, which rarely is the case. In this paper, we contribute by developing a novel deep learning based calibration technique that uses battery temperature measurements to learn a model that allows adapting to changes in the internal thermal calibration parameters. Our method is particularly effective in continuous sensing where the device casing the camera is prone to heating. We demonstrate the effectiveness of our technique through controlled benchmark experiments which show significant improvements in thermal monitoring accuracy and robustness.
U2 - 10.1109/PERCOM.2019.8767423
DO - 10.1109/PERCOM.2019.8767423
M3 - Conference contribution/Paper
SN - 9781538691496
BT - 2019 IEEE International Conference on Pervasive Computing and Communications
PB - IEEE
ER -