Home > Research > Publications & Outputs > Hydrogen production by glycerol steam reforming...

Links

Text available via DOI:

View graph of relations

Hydrogen production by glycerol steam reforming with/without calcium oxide sorbent: A comparative study of thermodynamic and experimental work

Research output: Contribution to Journal/MagazineJournal articlepeer-review

Published

Standard

Hydrogen production by glycerol steam reforming with/without calcium oxide sorbent: A comparative study of thermodynamic and experimental work. / Wang, Xiaodong; Li, M.; Li, S. et al.
In: Fuel Processing Technology, Vol. 91, No. 12, 2010, p. 1812-1818.

Research output: Contribution to Journal/MagazineJournal articlepeer-review

Harvard

APA

Vancouver

Wang X, Li M, Li S, Wang H, Wang S, Ma X. Hydrogen production by glycerol steam reforming with/without calcium oxide sorbent: A comparative study of thermodynamic and experimental work. Fuel Processing Technology. 2010;91(12):1812-1818. doi: 10.1016/j.fuproc.2010.08.003

Author

Bibtex

@article{790b810e851e4f7787eca7a1554d4ba7,
title = "Hydrogen production by glycerol steam reforming with/without calcium oxide sorbent: A comparative study of thermodynamic and experimental work",
abstract = "Thermodynamic analysis and experimental tests of glycerol steam reforming with/without calcium oxide (CaO) as a carbon dioxide (CO2) sorbent have been performed and compared in this work. Methanol, ethanol, acetaldehyde, acetone and ethylene do not exist in equilibrium conditions according to the equilibrium calculations. Without CaO present, thermodynamic predictions show that a maximum hydrogen concentration of 67% can be obtained at 925 K, with a water to glycerol ratio (WGR) of 9. In the experiments, the Ni/ZrO2 catalyst fails to catalyze the reactions to thermodynamic equilibrium under the selected conditions as the highest hydrogen concentration obtained is 64%. With the presence of CaO, thermodynamic analysis implies hydrogen purity exceeding 95% can be achieved below 925 K at WGRs of 6 and 9. However, CaCO3 does not exist at temperatures greater than 1025 K. In the experiments, a hydrogen purity of 95% with only 5% CH4 as impurity can be reached at 850 K with a WGR of 9. The Ni/ZrO2 catalyst is not active enough to convert excess CH4 to hydrogen in glycerol steam reforming as CH4 concentrations are usually higher than the equilibrium values. The addition of CaO to this system greatly enhances the hydrogen production while reducing the CO concentration.",
author = "Xiaodong Wang and M. Li and S. Li and H. Wang and S. Wang and X. Ma",
year = "2010",
doi = "10.1016/j.fuproc.2010.08.003",
language = "English",
volume = "91",
pages = "1812--1818",
journal = "Fuel Processing Technology",
issn = "0378-3820",
publisher = "Elsevier",
number = "12",

}

RIS

TY - JOUR

T1 - Hydrogen production by glycerol steam reforming with/without calcium oxide sorbent

T2 - A comparative study of thermodynamic and experimental work

AU - Wang, Xiaodong

AU - Li, M.

AU - Li, S.

AU - Wang, H.

AU - Wang, S.

AU - Ma, X.

PY - 2010

Y1 - 2010

N2 - Thermodynamic analysis and experimental tests of glycerol steam reforming with/without calcium oxide (CaO) as a carbon dioxide (CO2) sorbent have been performed and compared in this work. Methanol, ethanol, acetaldehyde, acetone and ethylene do not exist in equilibrium conditions according to the equilibrium calculations. Without CaO present, thermodynamic predictions show that a maximum hydrogen concentration of 67% can be obtained at 925 K, with a water to glycerol ratio (WGR) of 9. In the experiments, the Ni/ZrO2 catalyst fails to catalyze the reactions to thermodynamic equilibrium under the selected conditions as the highest hydrogen concentration obtained is 64%. With the presence of CaO, thermodynamic analysis implies hydrogen purity exceeding 95% can be achieved below 925 K at WGRs of 6 and 9. However, CaCO3 does not exist at temperatures greater than 1025 K. In the experiments, a hydrogen purity of 95% with only 5% CH4 as impurity can be reached at 850 K with a WGR of 9. The Ni/ZrO2 catalyst is not active enough to convert excess CH4 to hydrogen in glycerol steam reforming as CH4 concentrations are usually higher than the equilibrium values. The addition of CaO to this system greatly enhances the hydrogen production while reducing the CO concentration.

AB - Thermodynamic analysis and experimental tests of glycerol steam reforming with/without calcium oxide (CaO) as a carbon dioxide (CO2) sorbent have been performed and compared in this work. Methanol, ethanol, acetaldehyde, acetone and ethylene do not exist in equilibrium conditions according to the equilibrium calculations. Without CaO present, thermodynamic predictions show that a maximum hydrogen concentration of 67% can be obtained at 925 K, with a water to glycerol ratio (WGR) of 9. In the experiments, the Ni/ZrO2 catalyst fails to catalyze the reactions to thermodynamic equilibrium under the selected conditions as the highest hydrogen concentration obtained is 64%. With the presence of CaO, thermodynamic analysis implies hydrogen purity exceeding 95% can be achieved below 925 K at WGRs of 6 and 9. However, CaCO3 does not exist at temperatures greater than 1025 K. In the experiments, a hydrogen purity of 95% with only 5% CH4 as impurity can be reached at 850 K with a WGR of 9. The Ni/ZrO2 catalyst is not active enough to convert excess CH4 to hydrogen in glycerol steam reforming as CH4 concentrations are usually higher than the equilibrium values. The addition of CaO to this system greatly enhances the hydrogen production while reducing the CO concentration.

U2 - 10.1016/j.fuproc.2010.08.003

DO - 10.1016/j.fuproc.2010.08.003

M3 - Journal article

VL - 91

SP - 1812

EP - 1818

JO - Fuel Processing Technology

JF - Fuel Processing Technology

SN - 0378-3820

IS - 12

ER -