Rights statement: The final publication is available at Springer via http://dx.doi.org/10.1007/s10973-020-10390-x
Accepted author manuscript, 894 KB, PDF document
Available under license: CC BY-NC: Creative Commons Attribution-NonCommercial 4.0 International License
Final published version
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Research output: Contribution to Journal/Magazine › Journal article › peer-review
}
TY - JOUR
T1 - Improved thermo-physical properties and energy efficiency of hybrid PCM/graphene-silver nanocomposite in a hybrid CPV/thermal solar system
AU - Aslfattahi, N.
AU - Saidur, R.
AU - Arifutzzaman, A.
AU - Abdelrazik, A.S.
AU - Samylingam, L.
AU - Sabri, M.F.M.
AU - Sidik, N.A.C.
N1 - The final publication is available at Springer via http://dx.doi.org/10.1007/s10973-020-10390-x
PY - 2022/1/31
Y1 - 2022/1/31
N2 - In this research work, novel hybrid graphene-silver (Gr-Ag) nanomaterial has been used for first time with paraffin wax as a phase change material (PCM) to improve its thermo-physical properties. Thermal and electrical energy efficiencies of the novel synthesized nanocomposite (PCM/graphene-silver) has been investigated in solar thermal collector systems (CPV/T). This paper focuses on preparation, characterization, thermo-physical properties and energy efficiency in concentrated photovoltaic/thermal (CPV/T) system of new class of nanocomposites induced with hybrid Gr-Ag nanomaterial in three different concentrations. The specific heat capacity (cp) of hybrid PCM/graphene-silver nanocomposite increased by introducing hybrid Gr-Ag nanomaterial. Electrical and thermal energy performance of the hybrid PCM/graphene-silver is investigated in a CPV/T system using MATLAB 2017b program. The improvement of cp is found to be ~ 40% with 0.3 mass% of hybrid Gr-Ag nanomaterial loaded in PCM. The highest thermal conductivity increment is found to be ~ 11% at 0.3 mass% concentration of hybrid Gr-Ag nanomaterial in PCM. The endothermic enthalpy value of the hybrid PCM/graphene-silver nanocomposite is found to be ~ 75.6 J g−1 at 0.1 mass% loading concentration of hybrid Gr-Ag nanomaterial. Melting point of hybrid PCM/graphene-silver nanocomposite with loading concentration of 0.3 mass% is measured to be 73.2 °C. The highest thermal efficiency using the hybrid graphene-silver nanoparticles reached the value of 39.62% which represents 4.16% increment in comparison with the pure PCM. The equivalent electrical efficiency is improved by 2.8% at the loading concentration of 0.3 mass% of the hybrid Gr-Ag nanomaterial. These new class of nanocomposites represented the capability of enhancement in the performance of the CPV/T system consisting of lower PV temperatures, higher temperature gains across the cooling fluid and higher electrical and thermal efficiencies.
AB - In this research work, novel hybrid graphene-silver (Gr-Ag) nanomaterial has been used for first time with paraffin wax as a phase change material (PCM) to improve its thermo-physical properties. Thermal and electrical energy efficiencies of the novel synthesized nanocomposite (PCM/graphene-silver) has been investigated in solar thermal collector systems (CPV/T). This paper focuses on preparation, characterization, thermo-physical properties and energy efficiency in concentrated photovoltaic/thermal (CPV/T) system of new class of nanocomposites induced with hybrid Gr-Ag nanomaterial in three different concentrations. The specific heat capacity (cp) of hybrid PCM/graphene-silver nanocomposite increased by introducing hybrid Gr-Ag nanomaterial. Electrical and thermal energy performance of the hybrid PCM/graphene-silver is investigated in a CPV/T system using MATLAB 2017b program. The improvement of cp is found to be ~ 40% with 0.3 mass% of hybrid Gr-Ag nanomaterial loaded in PCM. The highest thermal conductivity increment is found to be ~ 11% at 0.3 mass% concentration of hybrid Gr-Ag nanomaterial in PCM. The endothermic enthalpy value of the hybrid PCM/graphene-silver nanocomposite is found to be ~ 75.6 J g−1 at 0.1 mass% loading concentration of hybrid Gr-Ag nanomaterial. Melting point of hybrid PCM/graphene-silver nanocomposite with loading concentration of 0.3 mass% is measured to be 73.2 °C. The highest thermal efficiency using the hybrid graphene-silver nanoparticles reached the value of 39.62% which represents 4.16% increment in comparison with the pure PCM. The equivalent electrical efficiency is improved by 2.8% at the loading concentration of 0.3 mass% of the hybrid Gr-Ag nanomaterial. These new class of nanocomposites represented the capability of enhancement in the performance of the CPV/T system consisting of lower PV temperatures, higher temperature gains across the cooling fluid and higher electrical and thermal efficiencies.
KW - CPV/T
KW - Energy efficiency
KW - Hybrid nanocomposite
KW - Thermal storage
KW - Graphene
KW - MATLAB
KW - Nanocomposites
KW - Phase change materials
KW - Silver nanoparticles
KW - Specific heat
KW - Thermal conductivity
KW - Electrical efficiency
KW - Electrical energy efficiency
KW - Endothermic enthalpy
KW - Loading concentration
KW - Photovoltaic/thermal
KW - Solar thermal collector
KW - Thermal efficiency
KW - Thermo-physical property
KW - Collector efficiency
U2 - 10.1007/s10973-020-10390-x
DO - 10.1007/s10973-020-10390-x
M3 - Journal article
VL - 147
SP - 1125
EP - 1142
JO - Journal of Thermal Analysis and Calorimetry
JF - Journal of Thermal Analysis and Calorimetry
SN - 1388-6150
IS - 2
ER -