Rights statement: This is the author’s version of a work that was accepted for publication in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 869, 2017 DOI: 10.1016/j.nima.2017.06.043
Accepted author manuscript, 1.26 MB, PDF document
Available under license: CC BY-NC-ND: Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License
Final published version
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Research output: Contribution to Journal/Magazine › Journal article › peer-review
}
TY - JOUR
T1 - Material optimisation in dual particle detectors by comparing advanced scintillating materials using two Monte Carlo codes
AU - Al Hamrashdi, Hajir
AU - Cheneler, David
AU - Monk, Stephen David
N1 - This is the author’s version of a work that was accepted for publication in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 869, 2017 DOI: 10.1016/j.nima.2017.06.043
PY - 2017/10/11
Y1 - 2017/10/11
N2 - A new generation of scintillating materials have been recently developed in the radiation-imaging field offering very promising dual particle detection abilities. Here, four different scintillating materials (Cs2LiYCl6:Ce (CLYC), 95% 6Li enriched Cs2LiYCl6:Ce (CLYC-6), natural Li-glass scintillator (GS10) and liquid scintillator EJ-309) have been characterized for their abilities to attenuate thermal neutrons, fast neutrons and gamma-rays. Recent studies regarding these materials overlook these fundamental characteristics, which can directly affect the design process of advanced imaging systems such as Compton cameras and dual particle imaging systems. The response of each featured material to these three types of radiation fields was simulated with two different Monte Carlo codes, MCNP6 and Geant4. The results indicated that among these four materials, natural Li-glass scintillator (GS10) has the highest thermal neutron detection efficiency and the highest elastic scattering efficiencies. However, the attenuation of fast neutrons was found to be the most severe in EJ-309 liquid scintillator. When gamma-rays are considered, it was found that the mass attenuation coefficient of CLYC and CLYC-6 is the highest of the four materials considered when energies lower than 1 MeV are incident. It is intended that this work will lead to the design and the build of an advanced prototype three stage Compton Camera which will be sensitive to both neutrons and Gamma rays.
AB - A new generation of scintillating materials have been recently developed in the radiation-imaging field offering very promising dual particle detection abilities. Here, four different scintillating materials (Cs2LiYCl6:Ce (CLYC), 95% 6Li enriched Cs2LiYCl6:Ce (CLYC-6), natural Li-glass scintillator (GS10) and liquid scintillator EJ-309) have been characterized for their abilities to attenuate thermal neutrons, fast neutrons and gamma-rays. Recent studies regarding these materials overlook these fundamental characteristics, which can directly affect the design process of advanced imaging systems such as Compton cameras and dual particle imaging systems. The response of each featured material to these three types of radiation fields was simulated with two different Monte Carlo codes, MCNP6 and Geant4. The results indicated that among these four materials, natural Li-glass scintillator (GS10) has the highest thermal neutron detection efficiency and the highest elastic scattering efficiencies. However, the attenuation of fast neutrons was found to be the most severe in EJ-309 liquid scintillator. When gamma-rays are considered, it was found that the mass attenuation coefficient of CLYC and CLYC-6 is the highest of the four materials considered when energies lower than 1 MeV are incident. It is intended that this work will lead to the design and the build of an advanced prototype three stage Compton Camera which will be sensitive to both neutrons and Gamma rays.
KW - Neutron imaging
KW - Gamma-ray imaging
KW - MCNP6
KW - Geant4
KW - Cs2LiYCl6:Ce (CLYC)
KW - 95% 6Li6Li enriched Cs2LiYCl6:Ce (CLYC-6)
KW - Natural Li-glass (GS10)
KW - Neutron imaging; Gamma-ray imaging; MCNP6; Geant4; Cs2LEJ-309 liquid scintillator
U2 - 10.1016/j.nima.2017.06.043
DO - 10.1016/j.nima.2017.06.043
M3 - Journal article
VL - 869
SP - 163
EP - 171
JO - Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
JF - Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment
SN - 0168-9002
ER -