TY - JOUR

T1 - Mathematical modelling, performance evaluation and exergy analysis of a hybrid photovoltaic/thermal-solar thermoelectric system integrated with compound parabolic concentrator and parabolic trough concentrator

AU - Sripadmanabhan Indira, S.

AU - Aravind Vaithilingam, C.

AU - Narasingamurthi, K.

AU - Sivasubramanian, R.

AU - Chong, K.-K.

AU - Saidur, R.

N1 - This is the author’s version of a work that was accepted for publication in Applied Energy. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Applied Energy, 320, 2022 DOI: 10.1016/j.apenergy.2022.119294

PY - 2022/8/15

Y1 - 2022/8/15

N2 - This article discusses the electrical and thermal performance of a hybrid concentrator photovoltaic thermal and solar thermoelectric generator (CPV/T-STEG) system using a compound parabolic concentrator (CPC) and a parabolic trough concentrator (PTC). For the first time, the idea of merging imaging and non-imaging concentrators for a CPV and TEG hybrid system is examined, providing an option to retrofit or remodel existing PTC-based CSP systems. The thermal resistance concept is applied to establish a steady-state mathematical model of the proposed hybrid CPV/T-STEG system. A Newton-Raphson iterative approach is employed to solve the mathematical model and compute the temperature in every layer of the hybrid system. After validation, the mathematical model is employed to evaluate the overall performance of the hybrid system. The modelling results revealed that the electrical and thermal output of the developed hybrid system were higher by 2 and 1.6 times, respectively, when compared with the prior parabolic trough-based hybrid CPV/T-STEG system described in the literature. The effects of ambient temperature, wind speed, flow rate, number of TEGs, and solar concentration ratio on the electrical and thermal performance were investigated. The optimal number of TEGs required for maximum electrical performance under different solar concentration ratios is also obtained. Finally, the hybrid system's exergy efficiency is investigated for various solar concentration ratios. The simulation results revealed that the increase in the Reynolds number from 100 to 2000 improves the net electrical and thermal efficiency by 10.21% and 5.7%, respectively. At a fixed solar concentration ratio (CCPC=4suns and WPTC=2WCPC), the electrical efficiency of TEG drops by 81.4%, but the thermal efficiency increases by 16.81%, provided that the number of TEGs is increased from 1 to 17. The highest exergy of the hybrid system is 8.36% when CCPC=2suns and WPTC=2WCPC. Due to the poor efficiency of commercial TEGs, the overall exergy efficiency of the hybrid system decreases with an increasing solar concentration ratio. In the proposed hybrid system, a fluid channel separates both the PV and TEG modules; hence the electrical conversion efficiencies of both modules are not closely related.

AB - This article discusses the electrical and thermal performance of a hybrid concentrator photovoltaic thermal and solar thermoelectric generator (CPV/T-STEG) system using a compound parabolic concentrator (CPC) and a parabolic trough concentrator (PTC). For the first time, the idea of merging imaging and non-imaging concentrators for a CPV and TEG hybrid system is examined, providing an option to retrofit or remodel existing PTC-based CSP systems. The thermal resistance concept is applied to establish a steady-state mathematical model of the proposed hybrid CPV/T-STEG system. A Newton-Raphson iterative approach is employed to solve the mathematical model and compute the temperature in every layer of the hybrid system. After validation, the mathematical model is employed to evaluate the overall performance of the hybrid system. The modelling results revealed that the electrical and thermal output of the developed hybrid system were higher by 2 and 1.6 times, respectively, when compared with the prior parabolic trough-based hybrid CPV/T-STEG system described in the literature. The effects of ambient temperature, wind speed, flow rate, number of TEGs, and solar concentration ratio on the electrical and thermal performance were investigated. The optimal number of TEGs required for maximum electrical performance under different solar concentration ratios is also obtained. Finally, the hybrid system's exergy efficiency is investigated for various solar concentration ratios. The simulation results revealed that the increase in the Reynolds number from 100 to 2000 improves the net electrical and thermal efficiency by 10.21% and 5.7%, respectively. At a fixed solar concentration ratio (CCPC=4suns and WPTC=2WCPC), the electrical efficiency of TEG drops by 81.4%, but the thermal efficiency increases by 16.81%, provided that the number of TEGs is increased from 1 to 17. The highest exergy of the hybrid system is 8.36% when CCPC=2suns and WPTC=2WCPC. Due to the poor efficiency of commercial TEGs, the overall exergy efficiency of the hybrid system decreases with an increasing solar concentration ratio. In the proposed hybrid system, a fluid channel separates both the PV and TEG modules; hence the electrical conversion efficiencies of both modules are not closely related.

KW - Compound parabolic concentrator

KW - Concentrator photovoltaic/thermal

KW - Numerical simulation

KW - Parabolic trough concentrator

KW - Thermal modelling

KW - Thermoelectric generator

U2 - 10.1016/j.apenergy.2022.119294

DO - 10.1016/j.apenergy.2022.119294

M3 - Journal article

VL - 320

JO - Applied Energy

JF - Applied Energy

SN - 0306-2619

M1 - 119294

ER -