Rights statement: This is the author’s version of a work that was accepted for publication in Environmental Pollution. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Environmental Pollution, 266, 3, 2020 DOI: 10.1016/j.envpol.2020.115177
Accepted author manuscript, 1.14 MB, PDF document
Available under license: CC BY-NC-ND: Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License
Final published version
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Research output: Contribution to Journal/Magazine › Journal article › peer-review
}
TY - JOUR
T1 - Phosphorus-rich biochar produced through bean-worm skin waste pyrolysis enhances the adsorption of aqueous lead
AU - Yan, Yubo
AU - Sarkar, Binoy
AU - Zhou, Lei
AU - Zhang, Ling
AU - Li, Qiao
AU - Yang, Jianjun
AU - Bolan, Nanthi S
N1 - This is the author’s version of a work that was accepted for publication in Environmental Pollution. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Environmental Pollution, 266, 3, 2020 DOI: 10.1016/j.envpol.2020.115177
PY - 2020/11/1
Y1 - 2020/11/1
N2 - In China, more than 10,000 tons of bean-worm, which is rich in protein (68.5%) and essential amino acids (52.8%), is consumed annually. Thus, a large amount of bean-worm skin waste is generated, and is often indiscriminately disposed of, potentially causing environment problems. In this study, bean-worm skin (BWS) waste was pyrolyzed at 500 °C to produce biochar (BWS-BC), and the surface properties of BWS and BWS-BC were characterized using various spectroscopic techniques. Pb(II) adsorption properties of BWS and the corresponding biochar as a function of solution pH, contact time, and equilibrium concentration of Pb(II) were examined using adsorption isotherm, kinetics and thermodynamics studies. The maximum Pb(II) adsorption capacities based on the Langmuir isotherm model were calculated as 45 and 62 mg g−1 for BWS and BWS-BC, respectively, which were comparable to the values obtained for biochars derived from other agro-wastes. The adsorption feasibility, favorability and spontaneity of Pb(II), as derived from the thermodynamic parameters, indicated that chemisorption and precipitation (e.g., hydroxypyromorphite) were the main adsorption mechanism in case of BWS and BWS-BC, respectively. Thus, conversion of BWS to biochar for Pb(II) adsorption can be considered as a feasible, promising and high value-added approach for BWS recycling.
AB - In China, more than 10,000 tons of bean-worm, which is rich in protein (68.5%) and essential amino acids (52.8%), is consumed annually. Thus, a large amount of bean-worm skin waste is generated, and is often indiscriminately disposed of, potentially causing environment problems. In this study, bean-worm skin (BWS) waste was pyrolyzed at 500 °C to produce biochar (BWS-BC), and the surface properties of BWS and BWS-BC were characterized using various spectroscopic techniques. Pb(II) adsorption properties of BWS and the corresponding biochar as a function of solution pH, contact time, and equilibrium concentration of Pb(II) were examined using adsorption isotherm, kinetics and thermodynamics studies. The maximum Pb(II) adsorption capacities based on the Langmuir isotherm model were calculated as 45 and 62 mg g−1 for BWS and BWS-BC, respectively, which were comparable to the values obtained for biochars derived from other agro-wastes. The adsorption feasibility, favorability and spontaneity of Pb(II), as derived from the thermodynamic parameters, indicated that chemisorption and precipitation (e.g., hydroxypyromorphite) were the main adsorption mechanism in case of BWS and BWS-BC, respectively. Thus, conversion of BWS to biochar for Pb(II) adsorption can be considered as a feasible, promising and high value-added approach for BWS recycling.
KW - Pb(II) removal
KW - Bean-worm skin waste
KW - Biochar
KW - Absorption mechanism
KW - Wastewater treatment
U2 - 10.1016/j.envpol.2020.115177
DO - 10.1016/j.envpol.2020.115177
M3 - Journal article
VL - 266
JO - Environmental Pollution
JF - Environmental Pollution
SN - 0269-7491
IS - 3
M1 - 115177
ER -