Signalling over long interconnect is a dominant issue in electronic chip design in current technologies, with the device sizes getting smaller and smaller and the circuits becoming ever larger. Repeater insertion is a well established technique to minimise the propagation delay over long resistive interconnect. In deep sub-micron technologies, as the wires are spaced closer and closer together and signal rise and fall times go into the sub-nano second region, the coupling between interconnects assumes great significance. The resulting crosstalk has implications on the data throughput and on signal integrity. Depending on the data correlation on the coupled lines, the delay can either decrease or increase. In this paper we attempt to quantify the effect of worst-case capacitive crosstalk in parallel buses and look at how it affects repeater insertion in particular. We develop analytic expressions for the delay, buffer size and number that are suitable in a-priori timing analyses and signal integrity estimations. All equations are checked against a dynamic circuit simulator (SPECTRE)
"©2001 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE." "This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder."
