Home > Research > Publications & Outputs > Selective aptasensor for trinitrotoluene detection

Links

Text available via DOI:

View graph of relations

Selective aptasensor for trinitrotoluene detection: Comparison of the detecting performances from liquid and vapor phases

Research output: Contribution to Journal/MagazineJournal articlepeer-review

Published

Standard

Selective aptasensor for trinitrotoluene detection: Comparison of the detecting performances from liquid and vapor phases. / Armutcu, C.; Karasu, T.; Pişkin, S. et al.
In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 676, No. B, 132258, 05.11.2023.

Research output: Contribution to Journal/MagazineJournal articlepeer-review

Harvard

Armutcu, C, Karasu, T, Pişkin, S, Özgür, E & Uzun, L 2023, 'Selective aptasensor for trinitrotoluene detection: Comparison of the detecting performances from liquid and vapor phases', Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 676, no. B, 132258. https://doi.org/10.1016/j.colsurfa.2023.132258

APA

Armutcu, C., Karasu, T., Pişkin, S., Özgür, E., & Uzun, L. (2023). Selective aptasensor for trinitrotoluene detection: Comparison of the detecting performances from liquid and vapor phases. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 676(B), Article 132258. https://doi.org/10.1016/j.colsurfa.2023.132258

Vancouver

Armutcu C, Karasu T, Pişkin S, Özgür E, Uzun L. Selective aptasensor for trinitrotoluene detection: Comparison of the detecting performances from liquid and vapor phases. Colloids and Surfaces A: Physicochemical and Engineering Aspects. 2023 Nov 5;676(B):132258. Epub 2023 Aug 19. doi: 10.1016/j.colsurfa.2023.132258

Author

Armutcu, C. ; Karasu, T. ; Pişkin, S. et al. / Selective aptasensor for trinitrotoluene detection : Comparison of the detecting performances from liquid and vapor phases. In: Colloids and Surfaces A: Physicochemical and Engineering Aspects. 2023 ; Vol. 676, No. B.

Bibtex

@article{f063e6b22c4f4ed68c16149bad20b193,
title = "Selective aptasensor for trinitrotoluene detection: Comparison of the detecting performances from liquid and vapor phases",
abstract = "In general, chromatographic and sensor analyses have been utilized for explosive detection. The main interest on those systems is to develop a method to selectively detect explosives at a single step as well as from vapor phase if possible. Moreover, on-site and real-time detection with portable systems is another challenge for the researchers. On the other hand, the detection of 2,4,6-trinitrotoluene (TNT) vapor at the crime scene, preferably before the explosion is highly demanded in order to prevent the negative effects of terrorism and to ensure the safety of the civilian population. In this study, initially, Quartz Crystal Microbalance (QCM) sensor was prepared for real-time monitoring of TNT in aqueous solution, through the attachment of TNT peptide aptamer on the gold surface of QCM sensor. Secondly, after providing optimum conditions, TNT detection was investigated even from vapor phase through the QCM aptasensor. According to results, the selectivity coefficient of QCM-based aptasensor was calculated as 6.78 for TNT in respect to DNT whereas that was calculated as 9.02 for TNT in respect to TNB. In addition, the evaluation of the reusability and storage stability emphasized that the sensor could be used repeatedly without significant reduction in dissipation (∆D) values. The linearity coefficient (R2) was found to be 0.9965. The limit of detection (LOD) and the limit of quantitation (LOQ) were determined as 0.0238 and 0.0739 nM, respectively. The studies demonstrated that the portable QCM sensor decorated with the aptamer selective for TNT molecules could be classified as a promising alternative, selective, cost-friendly, easy-to-prepare, ready-to-use, and applicable for on-site and real-time explosive measurements (even from vapor phase).",
author = "C. Armutcu and T. Karasu and S. Pi{\c s}kin and E. {\"O}zg{\"u}r and L. Uzun",
year = "2023",
month = nov,
day = "5",
doi = "10.1016/j.colsurfa.2023.132258",
language = "English",
volume = "676",
journal = "Colloids and Surfaces A: Physicochemical and Engineering Aspects",
issn = "0927-7757",
publisher = "Elsevier",
number = "B",

}

RIS

TY - JOUR

T1 - Selective aptasensor for trinitrotoluene detection

T2 - Comparison of the detecting performances from liquid and vapor phases

AU - Armutcu, C.

AU - Karasu, T.

AU - Pişkin, S.

AU - Özgür, E.

AU - Uzun, L.

PY - 2023/11/5

Y1 - 2023/11/5

N2 - In general, chromatographic and sensor analyses have been utilized for explosive detection. The main interest on those systems is to develop a method to selectively detect explosives at a single step as well as from vapor phase if possible. Moreover, on-site and real-time detection with portable systems is another challenge for the researchers. On the other hand, the detection of 2,4,6-trinitrotoluene (TNT) vapor at the crime scene, preferably before the explosion is highly demanded in order to prevent the negative effects of terrorism and to ensure the safety of the civilian population. In this study, initially, Quartz Crystal Microbalance (QCM) sensor was prepared for real-time monitoring of TNT in aqueous solution, through the attachment of TNT peptide aptamer on the gold surface of QCM sensor. Secondly, after providing optimum conditions, TNT detection was investigated even from vapor phase through the QCM aptasensor. According to results, the selectivity coefficient of QCM-based aptasensor was calculated as 6.78 for TNT in respect to DNT whereas that was calculated as 9.02 for TNT in respect to TNB. In addition, the evaluation of the reusability and storage stability emphasized that the sensor could be used repeatedly without significant reduction in dissipation (∆D) values. The linearity coefficient (R2) was found to be 0.9965. The limit of detection (LOD) and the limit of quantitation (LOQ) were determined as 0.0238 and 0.0739 nM, respectively. The studies demonstrated that the portable QCM sensor decorated with the aptamer selective for TNT molecules could be classified as a promising alternative, selective, cost-friendly, easy-to-prepare, ready-to-use, and applicable for on-site and real-time explosive measurements (even from vapor phase).

AB - In general, chromatographic and sensor analyses have been utilized for explosive detection. The main interest on those systems is to develop a method to selectively detect explosives at a single step as well as from vapor phase if possible. Moreover, on-site and real-time detection with portable systems is another challenge for the researchers. On the other hand, the detection of 2,4,6-trinitrotoluene (TNT) vapor at the crime scene, preferably before the explosion is highly demanded in order to prevent the negative effects of terrorism and to ensure the safety of the civilian population. In this study, initially, Quartz Crystal Microbalance (QCM) sensor was prepared for real-time monitoring of TNT in aqueous solution, through the attachment of TNT peptide aptamer on the gold surface of QCM sensor. Secondly, after providing optimum conditions, TNT detection was investigated even from vapor phase through the QCM aptasensor. According to results, the selectivity coefficient of QCM-based aptasensor was calculated as 6.78 for TNT in respect to DNT whereas that was calculated as 9.02 for TNT in respect to TNB. In addition, the evaluation of the reusability and storage stability emphasized that the sensor could be used repeatedly without significant reduction in dissipation (∆D) values. The linearity coefficient (R2) was found to be 0.9965. The limit of detection (LOD) and the limit of quantitation (LOQ) were determined as 0.0238 and 0.0739 nM, respectively. The studies demonstrated that the portable QCM sensor decorated with the aptamer selective for TNT molecules could be classified as a promising alternative, selective, cost-friendly, easy-to-prepare, ready-to-use, and applicable for on-site and real-time explosive measurements (even from vapor phase).

U2 - 10.1016/j.colsurfa.2023.132258

DO - 10.1016/j.colsurfa.2023.132258

M3 - Journal article

VL - 676

JO - Colloids and Surfaces A: Physicochemical and Engineering Aspects

JF - Colloids and Surfaces A: Physicochemical and Engineering Aspects

SN - 0927-7757

IS - B

M1 - 132258

ER -