Home > Research > Publications & Outputs > Selective electrochemical conversion of glycero...

Links

Text available via DOI:

View graph of relations

Selective electrochemical conversion of glycerol to glycolic acid and lactic acid on a mixed carbon-black activated carbon electrode in a single compartment electrochemical cell

Research output: Contribution to Journal/MagazineJournal articlepeer-review

Published
  • C.S. Lee
  • M.K. Aroua
  • W.A. Wan Daud
  • P. Cognet
  • Y. Pérès
  • M.A. Ajeel
Close
Article number110
<mark>Journal publication date</mark>13/03/2019
<mark>Journal</mark>Frontiers in Chemistry
Volume7
Number of pages11
Publication StatusPublished
<mark>Original language</mark>English

Abstract

In recent years, the rapid swift increase in world biodiesel production has caused an oversupply of its by-product, glycerol. Therefore, extensive research is done worldwide to convert glycerol into numerous high added-value chemicals i.e., glyceric acid, 1,2-propanediol, acrolein, glycerol carbonate, dihydroxyacetone, etc. Hydroxyl acids, glycolic acid and lactic acid, which comprise of carboxyl and alcohol functional groups, are the focus of this study. They are chemicals that are commonly found in the cosmetic industry as an antioxidant or exfoliator and a chemical source of emulsifier in the food industry, respectively. The aim of this study is to selectively convert glycerol into these acids in a single compartment electrochemical cell. For the first time, electrochemical conversion was performed on the mixed carbon-black activated carbon composite (CBAC) with Amberlyst-15 as acid catalyst. To the best of our knowledge, conversion of glycerol to glycolic and lactic acids via electrochemical studies using this electrode has not been reported yet. Two operating parameters i.e., catalyst dosage (6.4-12.8% w/v) and reaction temperature [room temperature (300 K) to 353 K] were tested. At 353 K, the selectivity of glycolic acid can reach up to 72% (with a yield of 66%), using 9.6% w/v catalyst. Under the same temperature, lactic acid achieved its highest selectivity (20.7%) and yield (18.6%) at low catalyst dosage, 6.4% w/v. © 2019 Lee, Aroua, Wan Daud, Cognet, Pérès and Ajeel.

Bibliographic note

Export Date: 9 May 2019 Correspondence Address: Lee, C.S.; Department of Chemical Engineering, Faculty of Engineering, University of MalayaMalaysia; email: leecs@um.edu.my