TY - JOUR

T1 - Synthesis and characterization of zeolite-based composites functionalized with nanoscale zero-valent iron for removing arsenic in the presence of selenium from water

AU - Suazo-Hernández, Jonathan

AU - Sepúlveda, Pamela

AU - Manquián-Cerda, Karen

AU - Ramírez-Tagle, Rodrigo

AU - Rubio, María Angélica

AU - Bolan, Nanthi

AU - Sarkar, Binoy

AU - Arancibia-Miranda, Nicolás

PY - 2019/7/5

Y1 - 2019/7/5

N2 - We studied the sorption of As(V) in single and multi-component (As(V)-Se(VI)) aqueous systems using nanoscale zero-valent iron (nZVI) and nZVI-functionalized zeolite (Z-nZVI) adsorbents. Morphological and physico-chemical characterization of the adsorbents was conducted using X-ray diffraction (XRD), scanning electron microscopy (SEM), surface area and electrophoretic mobility measurements. SEM and XRD analyses showed that Fe-nanoparticle size and crystallinity were better preserved in Z-nZVI than nZVI after As(V) sorption. Highly efficient As(V) removal was achieved for all tested adsorbents with a minimal competition effect of Se(VI). In the single-component system, the equilibrium As(V) sorption time on nZVI and Z-nZVI was 40 and 60 min, respectively, while in the multi-component system, this time was 90 min for both the adsorbents. The Freundlich and pseudo-second-order models provided good fittings for the experimental sorption data (r2>0.96). The As(V) removal capacity was higher using Z-nZVI than nZVI both in the single and multi-component systems, suffering minimal differences in removal in both cases. The results suggested that Z-nZVI had more specific surface sites for As(V) than nZVI and zeolite, which makes Z-nZVI a more effective adsorbent than nZVI for the removal of As(V) from aqueous solutions in the presence of other oxyanions.

AB - We studied the sorption of As(V) in single and multi-component (As(V)-Se(VI)) aqueous systems using nanoscale zero-valent iron (nZVI) and nZVI-functionalized zeolite (Z-nZVI) adsorbents. Morphological and physico-chemical characterization of the adsorbents was conducted using X-ray diffraction (XRD), scanning electron microscopy (SEM), surface area and electrophoretic mobility measurements. SEM and XRD analyses showed that Fe-nanoparticle size and crystallinity were better preserved in Z-nZVI than nZVI after As(V) sorption. Highly efficient As(V) removal was achieved for all tested adsorbents with a minimal competition effect of Se(VI). In the single-component system, the equilibrium As(V) sorption time on nZVI and Z-nZVI was 40 and 60 min, respectively, while in the multi-component system, this time was 90 min for both the adsorbents. The Freundlich and pseudo-second-order models provided good fittings for the experimental sorption data (r2>0.96). The As(V) removal capacity was higher using Z-nZVI than nZVI both in the single and multi-component systems, suffering minimal differences in removal in both cases. The results suggested that Z-nZVI had more specific surface sites for As(V) than nZVI and zeolite, which makes Z-nZVI a more effective adsorbent than nZVI for the removal of As(V) from aqueous solutions in the presence of other oxyanions.

KW - Arsenic-selenium sorption

KW - Competition effect

KW - nZVI

KW - Water treatment

KW - Zeolite

U2 - 10.1016/j.jhazmat.2019.03.125

DO - 10.1016/j.jhazmat.2019.03.125

M3 - Journal article

C2 - 30974329

AN - SCOPUS:85063972730

VL - 373

SP - 810

EP - 819

JO - Journal of Hazardous Materials

JF - Journal of Hazardous Materials

SN - 0304-3894

ER -