Home > Research > Publications & Outputs > The leakage behavior of supercritical CO2 flow ...

Associated organisational unit

View graph of relations

The leakage behavior of supercritical CO2 flow in an experimental pipeline system

Research output: Contribution to Journal/MagazineJournal articlepeer-review

Published

Standard

The leakage behavior of supercritical CO2 flow in an experimental pipeline system. / Xie, Qiyuan; Tu, Ran; Jiang, Xi et al.
In: Applied Energy, Vol. 130, 01.10.2014, p. 574-580.

Research output: Contribution to Journal/MagazineJournal articlepeer-review

Harvard

APA

Vancouver

Xie Q, Tu R, Jiang X, Li K, Zhou X. The leakage behavior of supercritical CO2 flow in an experimental pipeline system. Applied Energy. 2014 Oct 1;130:574-580. doi: 10.1016/j.apenergy.2014.01.088

Author

Xie, Qiyuan ; Tu, Ran ; Jiang, Xi et al. / The leakage behavior of supercritical CO2 flow in an experimental pipeline system. In: Applied Energy. 2014 ; Vol. 130. pp. 574-580.

Bibtex

@article{c303c9b5f6c24496b11618e1062e39c9,
title = "The leakage behavior of supercritical CO2 flow in an experimental pipeline system",
abstract = "The accidental release is one of the main risks during the pipeline transportation of supercritical CO2 for carbon capture and storage and enhanced oil recovery. The leakage of high pressure CO2 involves complex phenomena, including the expansion and flashing of the CO2 jet, dispersion of a dense CO2 cloud, falling of the solid CO2 and sublimation of the dry ice bank, as well as changes of pressure and temperature in the pipelines. A new experimental setup is developed to study the leakage behavior of high pressure CO2 flow in a circulation pipeline system, which is about 23 m long. The inner diameter of the pipeline is 30 mm. The pressure in the pipeline can be as high as 12 MPa with a maximum temperature of 50 °C through a high pressure pump and an electrically heated cloth around the pipeline. In addition, the velocity of the CO2 flow in the pipeline can be controlled in the range of 0–5 m/s by a circulation pump. The opening and closing of the small leakage hole can be remotely controlled by an operator. Pressure sensors are located nearby the leakage hole in the experimental pipeline system to monitor the pressure change during the CO2 leakage. Moreover, thirteen thermocouples are used to measure temperatures of the CO2 flow inside the pipe and on the surface of the pipeline. The experiments carried out show the typical characteristics of the supercritical CO2 flow leaked from a small hole.",
keywords = "leakage, pipeline, supercritical, enhanced oil recovery, Carbon capture and storage ",
author = "Qiyuan Xie and Ran Tu and Xi Jiang and Kang Li and Xuejin Zhou",
year = "2014",
month = oct,
day = "1",
doi = "10.1016/j.apenergy.2014.01.088",
language = "English",
volume = "130",
pages = "574--580",
journal = "Applied Energy",
issn = "0306-2619",
publisher = "Elsevier BV",

}

RIS

TY - JOUR

T1 - The leakage behavior of supercritical CO2 flow in an experimental pipeline system

AU - Xie, Qiyuan

AU - Tu, Ran

AU - Jiang, Xi

AU - Li, Kang

AU - Zhou, Xuejin

PY - 2014/10/1

Y1 - 2014/10/1

N2 - The accidental release is one of the main risks during the pipeline transportation of supercritical CO2 for carbon capture and storage and enhanced oil recovery. The leakage of high pressure CO2 involves complex phenomena, including the expansion and flashing of the CO2 jet, dispersion of a dense CO2 cloud, falling of the solid CO2 and sublimation of the dry ice bank, as well as changes of pressure and temperature in the pipelines. A new experimental setup is developed to study the leakage behavior of high pressure CO2 flow in a circulation pipeline system, which is about 23 m long. The inner diameter of the pipeline is 30 mm. The pressure in the pipeline can be as high as 12 MPa with a maximum temperature of 50 °C through a high pressure pump and an electrically heated cloth around the pipeline. In addition, the velocity of the CO2 flow in the pipeline can be controlled in the range of 0–5 m/s by a circulation pump. The opening and closing of the small leakage hole can be remotely controlled by an operator. Pressure sensors are located nearby the leakage hole in the experimental pipeline system to monitor the pressure change during the CO2 leakage. Moreover, thirteen thermocouples are used to measure temperatures of the CO2 flow inside the pipe and on the surface of the pipeline. The experiments carried out show the typical characteristics of the supercritical CO2 flow leaked from a small hole.

AB - The accidental release is one of the main risks during the pipeline transportation of supercritical CO2 for carbon capture and storage and enhanced oil recovery. The leakage of high pressure CO2 involves complex phenomena, including the expansion and flashing of the CO2 jet, dispersion of a dense CO2 cloud, falling of the solid CO2 and sublimation of the dry ice bank, as well as changes of pressure and temperature in the pipelines. A new experimental setup is developed to study the leakage behavior of high pressure CO2 flow in a circulation pipeline system, which is about 23 m long. The inner diameter of the pipeline is 30 mm. The pressure in the pipeline can be as high as 12 MPa with a maximum temperature of 50 °C through a high pressure pump and an electrically heated cloth around the pipeline. In addition, the velocity of the CO2 flow in the pipeline can be controlled in the range of 0–5 m/s by a circulation pump. The opening and closing of the small leakage hole can be remotely controlled by an operator. Pressure sensors are located nearby the leakage hole in the experimental pipeline system to monitor the pressure change during the CO2 leakage. Moreover, thirteen thermocouples are used to measure temperatures of the CO2 flow inside the pipe and on the surface of the pipeline. The experiments carried out show the typical characteristics of the supercritical CO2 flow leaked from a small hole.

KW - leakage

KW - pipeline

KW - supercritical

KW - enhanced oil recovery

KW - Carbon capture and storage

U2 - 10.1016/j.apenergy.2014.01.088

DO - 10.1016/j.apenergy.2014.01.088

M3 - Journal article

VL - 130

SP - 574

EP - 580

JO - Applied Energy

JF - Applied Energy

SN - 0306-2619

ER -