Rights statement: ©2017 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.
Accepted author manuscript, 887 KB, PDF document
Available under license: CC BY-NC: Creative Commons Attribution-NonCommercial 4.0 International License
Final published version
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
}
TY - GEN
T1 - W-band klystron upconverter driven by pseudospark-sourced electron beam
AU - Zhang, Liang
AU - Yin, Huabi
AU - Zhao, Junping
AU - He, Wenlong
AU - Cross, Adrian W.
AU - Burt, Graeme Campbell
AU - Lingwood, Christopher James
AU - Paoloni, Claudio
N1 - ©2017 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.
PY - 2018/2/12
Y1 - 2018/2/12
N2 - In this paper, a three-cavity klystron upconverter operating at W-band is presented. It is predicted to generate 40 W when driven by a 30 kV, 0.2 A electron beam. Pseudospark-sourced electron beam after post-acceleration was proposed to be used with the klystron upconverter because it has the advantage of low energy spread, high current density, and no need of any external guiding magnetic field.
AB - In this paper, a three-cavity klystron upconverter operating at W-band is presented. It is predicted to generate 40 W when driven by a 30 kV, 0.2 A electron beam. Pseudospark-sourced electron beam after post-acceleration was proposed to be used with the klystron upconverter because it has the advantage of low energy spread, high current density, and no need of any external guiding magnetic field.
KW - klystron upconverter
KW - pseudospark discharge
KW - post acceleration
U2 - 10.1109/IVEC.2017.8289709
DO - 10.1109/IVEC.2017.8289709
M3 - Conference contribution/Paper
SN - 9781509059171
BT - 2017 Eighteenth International Vacuum Electronics Conference (IVEC)
PB - IEEE
T2 - International Vacuum Electronics Conference 2017
Y2 - 24 April 2017 through 26 April 2017
ER -