Home > Research > Publications & Outputs > Wireless Channel Model Based on SoC Design Meth...

Research

Links

Text available via DOI:

View graph of relations

Wireless Channel Model Based on SoC Design Methodology

Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

Published

Standard

Wireless Channel Model Based on SoC Design Methodology. / Aref, Ibrahim; Ahmed, Nuredin; Rodriguez-Salazar, Fernando et al.
2009.

Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

Harvard

Aref, I, Ahmed, N, Rodriguez-Salazar, F & Elgaid, K 2009, 'Wireless Channel Model Based on SoC Design Methodology'. https://doi.org/10.1109/ICSNC.2009.81

APA

Aref, I., Ahmed, N., Rodriguez-Salazar, F., & Elgaid, K. (2009). Wireless Channel Model Based on SoC Design Methodology. https://doi.org/10.1109/ICSNC.2009.81

Vancouver

Aref I, Ahmed N, Rodriguez-Salazar F, Elgaid K. Wireless Channel Model Based on SoC Design Methodology. 2009. doi: 10.1109/ICSNC.2009.81

Author

Aref, Ibrahim ; Ahmed, Nuredin ; Rodriguez-Salazar, Fernando et al. / Wireless Channel Model Based on SoC Design Methodology.

Bibtex

@conference{8accbb7ab600488e8162fcc365633d7d,
title = "Wireless Channel Model Based on SoC Design Methodology",
abstract = "In this paper, a new method to model and simulate a wireless communication system based on system on chip design methodology will be presented. The network performance effected by the amount of detail in the simulation model. Hence there is a need to develop suitable abstractions that maintain the accuracy of the simulation while keeping the computational resource requirements low. The integration of communication modelling into the design modelling has been shown by modelling a noisy communication channel in SystemC. The channel supports different modulation techniques such as, amplitude-shift keying, phase-shift keying, quadrature amplitude modulation. It supports the setting of different Signal to noise ratio and different types of interference for Point-to-Point and Point-to-Multipoint platforms based on SystemC design methodology.",
author = "Ibrahim Aref and Nuredin Ahmed and Fernando Rodriguez-Salazar and Khaled Elgaid",
year = "2009",
month = oct,
day = "6",
doi = "10.1109/ICSNC.2009.81",
language = "English",

}

RIS

TY - CONF

T1 - Wireless Channel Model Based on SoC Design Methodology

AU - Aref, Ibrahim

AU - Ahmed, Nuredin

AU - Rodriguez-Salazar, Fernando

AU - Elgaid, Khaled

PY - 2009/10/6

Y1 - 2009/10/6

N2 - In this paper, a new method to model and simulate a wireless communication system based on system on chip design methodology will be presented. The network performance effected by the amount of detail in the simulation model. Hence there is a need to develop suitable abstractions that maintain the accuracy of the simulation while keeping the computational resource requirements low. The integration of communication modelling into the design modelling has been shown by modelling a noisy communication channel in SystemC. The channel supports different modulation techniques such as, amplitude-shift keying, phase-shift keying, quadrature amplitude modulation. It supports the setting of different Signal to noise ratio and different types of interference for Point-to-Point and Point-to-Multipoint platforms based on SystemC design methodology.

AB - In this paper, a new method to model and simulate a wireless communication system based on system on chip design methodology will be presented. The network performance effected by the amount of detail in the simulation model. Hence there is a need to develop suitable abstractions that maintain the accuracy of the simulation while keeping the computational resource requirements low. The integration of communication modelling into the design modelling has been shown by modelling a noisy communication channel in SystemC. The channel supports different modulation techniques such as, amplitude-shift keying, phase-shift keying, quadrature amplitude modulation. It supports the setting of different Signal to noise ratio and different types of interference for Point-to-Point and Point-to-Multipoint platforms based on SystemC design methodology.

U2 - 10.1109/ICSNC.2009.81

DO - 10.1109/ICSNC.2009.81

M3 - Conference paper

ER -