Allan Rennie - Publications & Outputs - Research Portal

Professor Allan Rennie

Professor in Manufacturing Engineering & Director of Engagement

101 - 200 out of 244Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Title

Published
Functional analysis for the development of bio-medical products
Lupeanu, M., Neagu, C., Opran, C. & Rennie, A., 10/2012, p. 330-336. 7 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Fuzzy Logic Based Ventilation for Controlling Harmful Gases in Livestock Houses
Caglayan, N., Celik, H. K. & Rennie, A. E. W., 09/2017. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Fuzzy Logic Based Ventilation for Controlling Harmful Gases in Livestock Houses
Celik, H. K., Rennie, A. E. W. & Caglayan, N., 12/2017, In: Journal of Agricultural Machinery Science. 13, 2, p. 107-112 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Geometry Optimisation of Tools used in Milling of Spherical Surfaces
Neagu, C., Lupeanu, M. & Rennie, A., 07/2011, SIM2011 - Sustainable Intelligent Manufacturing : Proceedings of the 1st International Conference on Sustainable Intelligent Manufacturing. Bartolo, H. (ed.). Leiria, Portugal, p. 87-94 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Graduate Attributes and Generic Skills in Remote Teaching
Gamage, K. A. A., Jeyachandran, K., Dehideniya, S. C. P., Lambert, C. & Rennie, A., 3/03/2023, Scholarly Community Encyclopdeia: Education, Scientific Disciplines. Basel, Switzerland: MDPI AG, 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Entry for encyclopedia/dictionary
Published
Horizon 2020 TWEETHER project for W-band high data rate wireless communications
Paoloni, C., Letizia, R., Napoli, F., Ni, Q., Rennie, A., Zimmerman, R., Andre, F., Pham, K., Krozer, V., Magne, F., Burciu, I., Ramirez, A., Rocchi, M., Marilier, M. & Vilar, R., 2015, Vacuum Electronics Conference (IVEC), 2015 IEEE International . IEEE, 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
How additive manufacturing helps in reducing power consumption in pumps
Vijayakumar, B., Rennie, A., Burns, N., Burns, M., Travis, D. & Battersby, P., 9/08/2013.
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
How to fix a tibial tubercle osteotomy with distalisation: A finite element analysis
Guneri, B., Kose, O., Celik, H. K., Cakar, A., Tasatan, E. & Rennie, A., 31/08/2022, In: Knee. 37, p. 132-142 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Unpublished
How to keep it in for longer: innovation in the Critical Care Unit
Laha, S. & Rennie, A., 6/11/2013, (Unpublished).
Research output: Contribution to conference - Without ISBN/ISSN › Other
Published
Improved Durability of a Modular Axial Fixator for Stable and Unstable Proximal Femoral Fractures: A Patient-Specific Finite Element Analysis
Celik, H. K., Icen, M., Ozdemir, H. & Rennie, A. E. W., 9/05/2024, In: Journal of Medical Devices. 18, 1, 22 p., 011007.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Improved filtration using additive manufacturing
Burns, N., Geekie, L., Travis, D., Burns, M., Weston, D. P. & Rennie, A., 07/2014.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Improved Tracheostomy Device
Laha, S. (Inventor), Adiele, A. C. (Inventor), Brewer, D. (Inventor), Ntelis, T. (Inventor), Pitman, S. (Inventor), Rennie, A. (Inventor) & Sheikh, Y. (Inventor), 8/11/2018, IPC No. A61M 16/04 (2006.01), Patent No. PCT/GB2018/051193, 3/05/2018, Priority date 3/05/2017, Priority No. 1707060.8
Research output: Patent
Published
Injection mould tool manufacture in less than five days
Jacobson, D., Bocking, C. & Rennie, A. E. W., 1/06/2002, 9 p. Society of Manufacturing Engineers.
Research output: Other contribution
Published
Injection Mould Tool Manufacture in Less Than Five Days
Jacobson, D. M., Bocking, C. E. & Rennie, A., 03/2002, RAPRA Rapid Tooling Conference 2002: Conference Proceedings. RAPRA, p. 35-43 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Innovations in filtration through additive manufacturing: Paper: EP140165
Burns, N., Burns, M., Travis, D., Geekie, L. & Rennie, A., 09/2014. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Integrating CFD and prototyping technologies in the investigation of multi-element profiles for a high-lift variable pitch vertical-axis tidal power generator
Quayle, S. & Rennie, A., 2007, In: International Journal of Agile Systems and Management. 2, 2, p. 222-236 15 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Introducing functionality to filter media
Vijayakumar, B., Rennie, A., Burns, N., Burns, M., Travis, D. & Battersby, P., 6/11/2013. 10 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Introducing functionality to filter media
Vijayakumar, B., Rennie, A., Burns, N., Travis, D. & Battersby, P., 10/2014, In: Filtration. 14, 4, p. 217-222 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Irregular Shape Effect of Brass and Copper Filler on the Properties of Metal Epoxy Composite (MEC) for Rapid Tooling Application
Hussin, R., Sharif, S., Rahim, S. Z. B. A., Rennie, A., Suhaimi, M. A., Abdellah, A. E.-H., Shuaib, N. A., Khushairi, M. T. M. & Titu, A. M., 2/11/2022, In: Journal of Manufacturing and Materials Processing. 6, 6, 22 p., 134.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Lancaster Virtual Prototyping Project: (GONW5167/8EUR – M4-07-LANC)
Rennie, A. E. W., 15/11/2006, Proceedings of the 4th EU Best Practice Conference: New Horizons in Graz..
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Machine Learning for Additive Manufacturing
Grierson, D., Rennie, A. & Quayle, S., 19/07/2021, In: Encyclopedia. 1, 3, p. 576-588 13 p.
Research output: Contribution to Journal/Magazine › Literature review › peer-review
Published
Mass optimisation of 3D-printed specimens using multivariable regression analysis
Doicin, C.-V., Ulmeanu, M.-E., Rennie, A. & Lupeanu, E., 31/12/2021, In: International Journal of Rapid Manufacturing. 10, 1, p. 1-22 22 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Maximising open area whilst retaining strength in novel metal additive manufactured filter media
Burns, N., Burns, M., Travis, D., Geekie, L., Hasib, H. & Rennie, A., 10/2014. 1 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
Published
Mechanical and Thermal Analyses of Metal-PLA Components Fabricated by Metal Material Extrusion
Mohammadizadeh, M., Lu, H., Fidan, I., Tantawi, K., Gupta, A., Hasanov, S., Zhang, Z., Alifui-Segbaya, F. & Rennie, A., 24/08/2020, In: Inventions — Open Access Journal. 5, 3, 11 p., 44.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Mechanical collision simulation of potato tubers
Celik, H. K., Cinar, R., Yilmaz, D., Ulmeanu, M.-E., Rennie, A. E. W. & Akinci, I., 1/08/2019, In: Journal of Food Process Engineering. 42, 5, 7 p., e13078.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Minimal Waste Galvonometer Field Correction for Additive Manufacturing
King, B., Bennett, G. R. & Rennie, A., 5/04/2019, 16th Rapid Design, Prototyping & Manufacturing Conference (RDPM2019): Proceedings of the. Rennie, A., Pei, E. & Hackney, P. (eds.). 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Modal analysis of agricultural machineries using finite element method: a case study for a V-belt pulley of a fodder crushing machine
Celik, H. K., Topakci, M., Canakci, M., Rennie, A. & Akinci, I., 12/11/2010, In: Journal of Food, Agriculture and Environment. 8, 3-4, p. 439-446 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Multi-material additive manufacture of multi-layer ceramic capacitors
King, B. A. T., Rowan, B., Williams, C., Williams, L., Tubby, D., Rennie, A. E. W. & Dennison, K., 12/2015, p. 79-85. 7 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Multi-step electrochemical polishing of additively manufactured 316L stainless steel components
Zhu, H., Tian, Y. & Rennie, A., 16/09/2021. 1 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
Published
Multivariable Regression Analysis for Optimised Mass Calculation of MEX 3D Printed Parts
Doicin, C.-V., Ulmeanu, M.-E., Rennie, A. & Lupeanu, E., 5/04/2019, 16th Rapid Design, Prototyping & Manufacturing Conference (RDPM2019). Rennie, A., Pei, E. & Hackney, P. (eds.). 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
New Tracheostomy Device Concept: An Additive Manufacturing Challenge in Reducing Late Clinical Complications
Ulmeanu, M.-E., Ulmeanu, L., Doicin, C.-V., Rennie, A. E. W. & Lupeanu, E., 11/2017, Proceedings of the 30th International Business Information Management Association Conference: Vision 2020: Sustainable Economic development, Innovation Management, and Global Growth. Soliman, K. S. (ed.). Madrid, Spain: International Business Information Management Association (IBIMA), p. 2611-2622 12 p. #538
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Nonlinear FEM based high-speed shell shattering simulation for shelled edible agricultural products: Pecan fruit shattering
Celik, H. K., Caglayan, N. & Rennie, A. E. W., 10/2017, In: Journal of Food Process Engineering. 40, 5, 8 p., e12520.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Non-Linear Stress Analysis for the Bolt Connections of A Chisel Tine Using Finite Element Method
Celik, K., Rennie, A. & Akinci, I., 07/2012, International Conference of Agricultural Engineering (CIGR-AgEng 2012): Proceedings of the . 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Non-stochastic lattice structures for novel filter applications fabricated via additive manufacturing
Hasib, H., Rennie, A., Burns, N. & Geekie, L., 2015, In: Filtration. 15, 3, p. 174-180 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Non-stochastic lattice structures for novel filter applications fabricated via additive manufacturing
Hasib, H., Rennie, A., Burns, N. & Geekie, L., 11/2014, The Filtration Society 50th Anniversary International Conference and Exhibition: Proceedings of the . The Filtration Society, 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Unpublished
Non-stochastic lattice structures for novel filter applications fabricated via additive manufacturing
Hasib, H., Rennie, A., Burns, N. & Geekie, L., 12/2014, (Unpublished).
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
Novel filter designs that deliver filtration benefits produced by metal additive manufacturing
Burns, N., Burns, M., Travis, D., Geekie, L., Rennie, A. & Weston, D. P., 10/2013, Proceedings of AFS 2013 Fall Conference: Innovation in Filter Media and Membranes. 13 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Online and Hybrid Teaching Effects on Graduate Attributes: Opportunity or Cause for Concern?
Gamage, K. A. A., Jeyachandran, K., Dehideniya, S. C. P., Lambert, C. & Rennie, A., 20/02/2023, In: Education Sciences. 13, 2, 15 p., 221.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Online Delivery of Teaching and Laboratory Practices: Continuity of University Programmes during COVID-19 Pandemic
Gamage, K. A. A., Wijesuriya, D., Ekanayake, S., Rennie, A., Lambert, C. & Gunawardhana, N., 19/10/2020, In: Educational Sciences. 10, 10, 9 p., 291.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Opportunities offered by additive manufacturing in creative businesses: informing designers
Anthony, R., Evans, M., Rennie, A. & Kirby, E., 09/2011, 13th International Conference on Engineering & Product Design Education (EPDE 11). p. 623-628 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Optimisation of build orientation for FDM additive manufactured products
Hambali, R. H., Vaudelin, M. & Rennie, A., 06/2011.
Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review
Published
Optimisation of Build Orientation for FDM Additive Manufactured Products
Hambali, R. H., Vaudelin, M. & Rennie, A., 02/2012, International Conference on Applications and Design in Mechanical Engineering (ICADME 2012): Proceedings of the . Perlis, Malaysia: School of Mechatronic Engineering, UniMAP, 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Unpublished
Photography and Cloud Computing enabled Replication of Historic Artefacts for fabrication via Additive Manufacturing Technology
Kaufman, J. & Rennie, A., 18/12/2012, (Unpublished).
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
Physical Analysis of Maximum Strength of Additive Manufactured Parts: A Case-Based Study
Hambali, R. H., Rennie, A. & McGovern, J., 03/2012, 2nd International Conference on Arts, Social Sciences & Technology: Proceedings of the . Penang, Malaysia, 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Placing postgraduate research students at the heart of knowledge exchange: benefits for academia and industry
Lambert, C. & Rennie, A., 1/07/2010, Proceedings of the 3rd International Symposium for Engineering Education (ISEE2010): educating engineers for a changing world : leading transformation from an unsustainable global society. p. 485-493 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Polarities of function and form using additive manufacturing - where the middle ground might be in achieving a creative balance for SMEs
Kaufman, J., Rennie, A. & Quayle, S., 06/2011, Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 135-143 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Post Processing Treatments on Laser Sintered Nylon 12
King, B. A. T., Rennie, A. E. W., Taylor, J. P. & Bennett, G. R., 8/12/2017, Solid Freeform Fabrication 2017: Proceedings of the 28th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference. The Minerals, Metals & Materials Society (TMS), p. 1464-1471 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Potential of New Sustainable Green Geopolymer Metal Composite (GGMC) Material as Mould Insert for Rapid Tooling (RT) in Injection Moulding Process
Yin, A. T. M., Rahim, S. Z. B. A., Abdullah, M. M. A. B., Nabiałek, M., Abdellah, A. E.-H., Rennie, A., Tahir, M. F. M. & Titu, A. M., 19/02/2023, In: Materials. 16, 4, 38 p., 1724.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Potential of Rapid Tooling in Rapid Heat Cycle Molding: A Review
Huzaim, N. H. M., Rahim, S., Musa, L., Abdellah, A. E.-H., Abdullah, M. M. A. B., Rennie, A., Rahman, R., Garus, S., Błoch, K., Sandu, A. V., Vizureanu, P. & Nabiałek, M., 23/05/2022, In: Materials. 15, 10, 39 p., 3725.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Powder Characterization – Methods, Standards and State of the Art
Groarke, R., Vijayaraghavan, R. K., Powell, D., Rennie, A. & Brabazon, D., 1/06/2021, Fundamentals of Laser Powder Bed Fusion of Metals. Yadroitsev, I., Yadroitsava, I., Du Plessis, A. & MacDonald, E. (eds.). Elsevier, p. 491-527 37 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Predicting limit draft force for a chisel tine using FEA based simulation
Celik, K., Rennie, A. & Akinci, I., 09/2013, 5th International Conference Trends in Agricultural Engineering (TAE 2013). p. 112-117 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Pressure determination approach in specific pressure region and FEM based stress analysis of the housing of an external gear pump
Cinar, R., Ucar, M., Celik, K., Firat, M. Z. & Rennie, A., 04/2016, In: Experimental Techniques. 40, 2, p. 489-499 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Pressure drop and velocity simulations in non-stochastic lattice structure for filter applications fabricated using additive manufacturing
Hasib, H., Rennie, A. E. W., Burns, N. & Geekie, L., 12/2015. 8 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Pressure Drop and Velocity Simulations in Non-Stochastic Structures - Filters Fabricated by Additive Manufacturing
Hasib, H., Rennie, A. E. W., Burns, N. & Geekie, L., 04/2016, In: Filtration. 16, 2, p. 97-102 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Proceedings of the 14th Rapid Design, Prototyping and Manufacturing Conference
Rennie, A. E. W. (Editor) & Bibb, R. (Editor), 2016, Lancaster: Lancaster University. 165 p.
Research output: Book/Report/Proceedings › Proceedings
Published
Product Optimization by Rapid Manufacturing and Targeted Functional Analysis
Lupeanu, M., Rennie, A., Neagu, C. & Celik, K., 2011, 16th European Forum on Rapid Prototyping and Manufacturing: Proceedings of the. 14 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Product re-design using advanced engineering applications and function analysis: a case study for greenhouse clips
Celik, K., Lupeanu, M., Rennie, A., Neagu, C. & Akinci, I., 10/2013, In: Journal of the Brazilian Society of Mechanical Sciences and Engineering. 35, 3, p. 305-318 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Unpublished
Production of fluid dynamically improved filters using additive manufacturing
Vijayakumar, B., Rennie, A. & Burns, N., 18/12/2012, (Unpublished).
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
Rapid and virtual prototyping and applications: Proceedings of the Fourth National Conference on (Incorporating RAPTIA (Rapid Prototyping and Tooling - Industrial Applications) State-of-the-Art Reports
Bocking, C. E. (Editor), Rennie, A. (Editor) & Jacobson, D. M. (Editor), 2003, Professional Engineering Publishing. 330 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid design, prototyping and manufacture: proceedings of the seventh national conference on
Bocking, C. E. (Editor), Rennie, A. E. W. (Editor) & Jacobson, D. M. J. (Editor), 2006, MJA Print. 134 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid design, prototyping and manufacture: Proceedings of the Fifth National Conference on
Jacobson, D. M. (Editor), Rennie, A. (Editor) & Bocking, C. E. (Editor), 2004, Professional Engineering Publishing. 111 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid design, prototyping and manufacture: Proceedings of the Sixth National Conference on
Rennie, A. (Editor), Jacobson, D. M. (Editor) & Bocking, C. E. (Editor), 2005, X-CD Technologies Inc. 129 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid design, prototyping and manufacture: Proceedings of the Eighth National Conference on
Jacobson, D. M. (Editor), Bocking, C. E. (Editor) & Rennie, A. (Editor), 2007, MJA Print. 140 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid design, prototyping and manufacturing: Proceedings of the Ninth National Conference on
Rennie, A. (Editor), Jacobson, D. M. (Editor) & Bocking, C. E. (Editor), 2008, MJA Print. 173 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid design, prototyping and manufacturing
Rennie, A., Aitchison, D. (Editor) & Jacobson, D. M., 12/2010, In: Virtual and Physical Prototyping. 5, 4, p. 181-181 1 p.
Research output: Contribution to Journal/Magazine › Editorial
Published
Rapid Design, Prototyping and Manufacturing: Proceedings of the Tenth National Conference on
Rennie, A. (Editor), Bocking, C. E. (Editor) & Jacobson, D. M. (Editor), 2009, MJA Print. 123 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid Design, Prototyping and Manufacturing: Proceedings of the Thirteenth Conference on
Bocking, C. E. (Editor) & Rennie, A. (Editor), 06/2012, High Wycombe: CRDM Ltd. 109 p.
Research output: Book/Report/Proceedings › Proceedings
Published
Rapid Design, Prototyping and Manufacturing: Proceedings of the Eleventh National Conference on
Jacobson, D. M. (Editor), Rennie, A. (Editor) & Bocking, C. E. (Editor), 2010, CRDM Ltd. 222 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on
Rennie, A. (Editor) & Bocking, C. E. (Editor), 06/2011, CRDM Ltd. 203 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid manufacturing complex geometries for high-power microwave applications
Seviour, R., Rennie, A. & Celik, H. K., 12/2009.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Unpublished
Rapid Manufacturing Design Scenarios
Smith, P. & Rennie, A., 12/2007, (Unpublished). 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Unpublished
Rapid Manufacturing Design Tools
Smith, P. & Rennie, A., 12/2008, (Unpublished). 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
Rapid production of microwave packaging in Silicon Aluminium by thin-shell electroforming
Bocking, C., Jacobson, D. M. & Rennie, A. E. W., 01/2002, In: Microelectronics International. 19, 1, p. 30-32 3 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rapid Production of Microwave Packaging in Silicon-Aluminium by Thin-Shell Electroforming
Bocking, C., Jacobson, D. M. & Rennie, A., 06/2001, 13th European Microelectronics and Packaging Conference & Exhibition, Proceedings of: iMAPS Strasbourg 2001, "The Millenium Conference". p. 412-415 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Rapid prototyping and flow simulation applications in design of agricultural irrigation equipment: Case study for a sample in-line drip emitter: The paper is to study CFD and RP application samples on the design issues associated with agricultural irrigation equipment
Celik, K., Karayel, D., Caglayan, N., Rennie, A. & Akinci, I., 03/2011, In: Virtual and Physical Prototyping. 6, 1, p. 47-56 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rapid Prototyping and Flow Simulation Applications in Design of Agricultural Irrigation Equipment: Case Study for a Sample In-Line Drip Emitter
Celik, K., Karayel, D., Caglayan, N., Rennie, A. & Akinci, I., 06/2010, 11th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Jacobson, D., Rennie, A. & Bocking, C. (eds.). High Wycombe: CRDM Ltd, p. 181-191 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Rapid prototyping using electrodeposition of copper
Dover, S. J., Rennie, A. & Bennett, G. R., 08/1996, Solid Freeform Fabrication Symposium 1996. University of Texas at Austin, p. 191-198 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Rapid Prototyping, Tooling and Manufacturing: Proc. Third National Conference on
Rennie, A. E. W. (Editor), Jacobson, D. M. (Editor) & Bocking, C. (Editor), 2002, Professional Engineering Publishing. 173 p.
Research output: Book/Report/Proceedings › Book
Unpublished
Redesign of custom-fitted surgical guide with targeted functional analysis fabricated via SLM
Lupeanu, M., Rennie, A. & Neagu, C., 31/03/2014, (Unpublished).
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
Redesign of custom-fitted surgical guide with targeted functional analysis fabricated via SLM
Lupeanu, M., Rennie, A., Eggbeer, D. & Neagu, C., 06/2011, Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 173-181 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Relationship Between Wall Thickness and Erosion Depth of Thin Walled Electroformed EDM Electrodes Produced from RP Models
Bocking, C. E., Rennie, A. & Bennett, G. R., 08/2000, 11th International Solid Freeform Fabrication Symposium (SFF 2000). University of Texas at Austin, p. 469-477 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Repurposing of metal support structures to form powder for use in additive manufacturing
Powell, D., Rennie, A., Molyneux, A., Burns, N. & Geekie, L., 5/04/2019, 16th Rapid Design, Prototyping & Manufacturing Conference (RDPM2019): Proceedings of the. Rennie, A., Pei, E. & Hackney, P. (eds.). 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Requirements for large-scale adoption of rapid manufacturing technologies
Hasan, S., Rennie, A., Hoque, M. R. & Ahmed, N., 24/05/2019, In: Cogent Business & Management. 6, 1, 22 p., 1623151.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Research on deploying technical functional analysis for additive manufacturing of a surgical device for intravitreal interventions
Lupeanu, M., Brooks, H., Rennie, A. & Hill, D., 2013, In: Buletinul Ştiinţific al Universităţii Politehnica Bucureşti, Seria D – Inginerie Mecanică. 75, 1, p. 141-160 20 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Research strategy on developing additive manufactured bespoke ophthalmic instruments assisted by an online integrated platform
Lupeanu, M., Rennie, A., Rosu, M.-M. & Moagar-Poladian, G., 04/2014, In: Buletinul Ştiinţific al Universităţii Politehnica Bucureşti, Seria D – Inginerie Mecanică. 76, 2, p. 143-162 20 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Reverse engineering approach for precise measurement of the physical attributes related to the geometric features of agricultural products
Celik, H. K., Rennie, A. E. W. & Akinci, I., 03/2017, In: Journal of Food Measurement and Characterization. 11, 1, p. 75-84 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Reverse engineering using close range photogrammetry for additive manufactured reproduction of Egyptian artefacts and other objets d'art
Kaufman, J., Rennie, A. & Clement, M., 1/03/2015, In: Journal of Computing and Information Science in Engineering. 15, 1, 7 p., 011006.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Reverse engineering using close range photogrammetry for additive manufactured reproduction of Egyptian artefacts and other objets d'art
Kaufman, J., Rennie, A. & Clement, M., 06/2014, Proceedings of the ASME 2014 12th Biennial Conference on Engineering System Design and Analysis (ESDA 2014): Volume 1: Applied Mechanics; Automotive Systems; Biomedical Biotechnology Engineering; Computational Mechanics; Design; Digital Manufacturing; Education; Marine and Aerospace Applications. American Society of Mechanical Engineers (ASME), 8 p. ESDA2014-20304
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Review on Additive Manufacturing of Multi-Material Parts: Progress and Challenges
Hasanov, S., Alkunte, S., Rajeshirke, M., Gupta, A., Huseynov, O., Fidan, I., Alifui-Segbaya, F. & Rennie, A., 27/12/2021, In: Journal of Manufacturing and Materials Processing. 6, 1, 32 p., 4.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rotation Rectilinear Scan Path Generation for Selective Laser Sintering
King, B. A. T., Rennie, A. E. W., Taylor, J. P. & Walsh, S. M. R., 21/06/2018, Assises Europeennes de la Fabrication Additive.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Selective Laser Melting for improving quality characteristics of a prism shaped topology injection mould tool insert for the automotive industry
El Kashouty, M., Rennie, A., Ghazy, M. & El Aziz, A. A., 1/12/2021, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 235, 23, 12 p., 989382.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Selective laser melting for near net-shape manufacturing: Investigation into structure-parameter relationships and phase determination by X-ray diffraction in stainless steel alloy systems
Green, S., OMeara, N. & Rennie, A., 2011. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Simulation and manufacture of wax toolfaces for the creation of silicone rubber tools using Magics™ RP software
Rennie, A. & Bennett, G. R., 2000, In: International Journal of Engineering Simulation. 1, 3, p. 24-30 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Simulation of flow characteristics for filters designed with a non-stochastic lattice structure fabricated via additive manufacturing
Hasib, H., Rennie, A. E. W., Burns, N. & Geekie, L., 12/2015, p. 153-158. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Single camera photogrammetry for reverse engineering and fabrication of ancient and modern artefacts
Kaufman, J., Rennie, A. & Clement, M., 03/2015. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Single camera photogrammetry for reverse engineering and fabrication of ancient and modern artifacts
Kaufman, J., Rennie, A. E. W. & Clement, M., 2015, In: Procedia CIRP. 36, p. 223-229 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Sizing Optimisation of a Subsoiler Framework using Advanced Engineering Tools
Celik, K., Rennie, A., Topakci, M. & Akinci, I., 07/2011, Proceedings of the XXXIV CIOSTA CIGR V Conference 2011: Efficient and safe production processes in sustainable agriculture and forestry. 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Skills development of employees at SMEs in the construction sector in the North of England
Ganah, A. & Rennie, A., 09/2010, The Construction, Building and Real Estate Research Conference of the Royal Institution of Chartered Surveyors (COBRA 2010): Proceedings of. Royal Institution of Chartered Surveyors (RICS), 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
SME application of LCA-based carbon footprints
Moss, J., Lambert, C. & Rennie, A., 06/2008, In: International Journal of Sustainable Engineering. 1, 2, p. 132-141 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
SME expectations and experiences
Seward, D., Quayle, S., Rennie, A. & Taylor, S., 2005. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Speech

Previous 1 2 3 Next

Research

Professor Allan Rennie

Quick Links

Connect With Us