Home > Research > Publications & Outputs > Non-stochastic lattice structures for novel fil...

Electronic data

  • FiltSoc_NonStochastic

    Accepted author manuscript, 917 KB, PDF document

    Available under license: CC BY: Creative Commons Attribution 4.0 International License

View graph of relations

Non-stochastic lattice structures for novel filter applications fabricated via additive manufacturing

Research output: Contribution to Journal/MagazineJournal articlepeer-review

<mark>Journal publication date</mark>2015
Issue number3
Number of pages7
Pages (from-to)174-180
Publication StatusPublished
<mark>Original language</mark>English


Non-stochastic lattice structures are widely used in a variety of applications such as biomedical implants and heat exchangers. However, the utilisation of these structures for filtration applications is rather new. Additive manufacturing techniques such as selective laser melting allows lattice structures to be bespoke depending on the type of filter and its intended function. This study considers the flow characteristics and structural strength of a disc filter with a layer of repeated 1.8 mm lattice unit cell as the filter mesh. Computational fluid dynamics simulation is used to analyse the pressure and flow velocity across the filter, while finite element analysis is utilised to analyse the structural characteristics of the lattice mesh under fluid load. The results show a minimal decrease in pressure and small increases in velocity, with the mesh capable of withstanding higher loads. The ultimate failure load of the structure is also determined. These findings indicate that more layers of lattice structures could be used as filter mesh and the flexibility of AM allows the filter properties to be tailored as required for a given application.

Bibliographic note

Date of Acceptance: Authors were not notified by the publisher