Additive Manufacturing as an Enabler of Environmental Solutions to Address Food Security

Roberts, J., Donkersley, P., Ashmore, L. & Rennie, A., 30/07/2023, Springer Tracts in Additive Manufacturing: Proceedings of CASICAM 2022. Zarbane, K. & Beidouri, Z. (eds.). Cham: Springer Nature, p. 287-297 11 p. (Springer Tracts in Additive Manufacturing).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review

Viscous Layer Formation in Electrochemical Polishing Laser-Powder Bed Fusion Parts with Different Surface Profiles

Zhu, H., Tian, Y. & Rennie, A., 30/07/2023, Springer Tracts in Additive Manufacturing: Proceedings of CASICAM 2022. Zarbane, K. & Beidouri, Z. (eds.). Cham: Springer Nature, p. 219-228 10 p. (Springer Tracts in Additive Manufacturing).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review

The role of technical functional analysis in innovative design of bespoke rapid manufactured parts: medical industry applications

Lupeanu, M., Rosu, M.-M., Rennie, A., Neagu, C. & Brooks, H., 06/2013, Advances in Production, Automation and Transportation Systems: Proceedings of the 6th WSEAS International Conference on Manufacturing Engineering, Quality and Production Systems (MEQAPS13) and 4th International Conference on Automotive and Transportation Systems (ICAT13). Brasov, Romania: WSEAS Press, Vol. 13. p. 227-232 6 p. (Mathematics and Computers in Science and Engineering Series; vol. 13).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

An investigation into the environmental impact of product recovery methods to support sustainable manufacturing within small and medium-sized enterprises (SMEs)

Appleby, M., Lambert, C., Rennie, A. & Buckley, A., 07/2012, Dynamic methods and process advancements in mechanical, manufacturing, and materials engineering. Davim, J. P. (ed.). Hershey, Penn.: IGI Global, p. 73-90 18 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Opportunities offered by additive manufacturing in creative businesses: informing designers

Anthony, R., Evans, M., Rennie, A. & Kirby, E., 09/2011, 13th International Conference on Engineering & Product Design Education (EPDE 11). p. 623-628 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Use of FDM in an undergraduate student project: design, build and test a model wind turbine

Widden, M., Gunn, K. & Rennie, A., 09/2010, 3rd International Conference on Additive Technologies (iCAT 2010); DAAAM Specialized Conference. DAAAM International, 2 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Rapid Prototyping and Flow Simulation Applications in Design of Agricultural Irrigation Equipment: Case Study for a Sample In-Line Drip Emitter

Celik, K., Karayel, D., Caglayan, N., Rennie, A. & Akinci, I., 06/2010, 11th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Jacobson, D., Rennie, A. & Bocking, C. (eds.). High Wycombe: CRDM Ltd, p. 181-191 11 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Templates for consumer use in designing customised products

Ariadi, Y. & Rennie, A., 08/2008, Solid Freeform Fabrication Symposium 2008. University of Texas at Austin, p. 450-458 9 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Development of an Additive Layer Manufacturing (ALM) selection tool for direct manufacture of products

Smith, P. & Rennie, A., 08/2008, Solid Freeform Fabrication Symposium 2008. University of Texas at Austin, p. 507-518 12 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

The application of rapid manufacturing technologies in the spare parts industry

Hasan, S. & Rennie, A., 08/2008, Sild Freeform Fabrication Symposium 2008. University of Texas at Austin, p. 584-590 7 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Development of an Additive Layer Manufacturing Selection Tool for Rapid Manufacturing Applications

Smith, P. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 69-79 11 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Virtual Trading System for Rapid Manufactured Products

Hasan, S. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 127-135 9 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Design templates for consumer use in customising additive layer manufactured products

Ariadi, Y. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 137-144 8 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Effect of wind loading on low rise buildings using finite element modelling and computational fluid dynamics: A commercially focused appoach

Taylor, S., Rennie, A. & McDonald, W., 2007, Virtual and Rapid Manufacturing: Advanced Research in Virtual and Rapid Prototyping. Bartolo, P. J. D. S. (ed.). London: Taylor & Francis Group, p. 811-816 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

From Concept to Manufacture: Effective use of CAD and FEA Without Compromising Design Intent

Taylor, S. M., Rennie, A. E. W., Quayle, S. & Rawcliffe, N., 10/06/2005, Rapid Design, Prototyping and Manufacture: Proc. Sixth National Conference on . Rennnie, A., Jacobson, D. & Bocking, C. (eds.). X-CD Technologies Inc, p. 101-107 7 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

An Investigation into the Use of Spray Formed Al/Si Metal Matrix Composites for Use as Injection Mould Die Inserts

Bocking, C., Jacobson, D. M. & Rennie, A., 09/2001, Time Compression technologies Conference 2001: Proceedings of. Rapid News Publications PLC, 22 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Rapid Production of Microwave Packaging in Silicon-Aluminium by Thin-Shell Electroforming

Bocking, C., Jacobson, D. M. & Rennie, A., 06/2001, 13th European Microelectronics and Packaging Conference & Exhibition, Proceedings of: iMAPS Strasbourg 2001, "The Millenium Conference". p. 412-415 4 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Relationship Between Wall Thickness and Erosion Depth of Thin Walled Electroformed EDM Electrodes Produced from RP Models

Bocking, C. E., Rennie, A. & Bennett, G. R., 08/2000, 11th International Solid Freeform Fabrication Symposium (SFF 2000). University of Texas at Austin, p. 469-477 9 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Surface Flatness Measurement in Stereolithography

Male, J. C., Rennie, A. & Bennett, G. R., 06/2000, The Eighth International Conference on Rapid Prototyping: Proc. of. The University of Dayton, p. 111-117 7 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

A system for the generation of liquid metal droplets using electromotive forces

Rennie, A. & Bennett, G. R., 09/1997, Proceedings World Congress: Manufacturing Technology Towards 2000: Incorporating the 7th International Conference on Manufacturing Engineering and the 3rd Australasian Conference on Rapid Product Development. James Cook University of North Queensland, p. 501-510 10 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

The wear of High Speed Selective Jet Electrodeposition electrodes when used as EDM tools

Dover, S. J., Rennie, A. & Bennett, G. R., 11/1996, Proceedings of the Second National Conference on developments in rapid prototyping and tooling. Mechanical Engineering Publications Ltd, p. 187-199 13 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Rapid prototyping using electrodeposition of copper

Dover, S. J., Rennie, A. & Bennett, G. R., 08/1996, Solid Freeform Fabrication Symposium 1996. University of Texas at Austin, p. 191-198 8 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Powder Characterization – Methods, Standards and State of the Art

Groarke, R., Vijayaraghavan, R. K., Powell, D., Rennie, A. & Brabazon, D., 1/06/2021, Fundamentals of Laser Powder Bed Fusion of Metals. Yadroitsev, I., Yadroitsava, I., Du Plessis, A. & MacDonald, E. (eds.). Elsevier, p. 491-527 37 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Electroforming for Injection Moulding

Rennie, A. & Bocking, C., 20/06/2003, Rapid and Virtual Prototyping and Applications: Proc. Fourth National Conference on (Incorporating RAPTIA (Rapid Prototyping and Tooling - Industrial Applications) State-of-the-Art Reports). Bocking, C., Rennie, A. & Jacobson, D. (eds.). Professional Engineering Publishing, p. 239-248

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Graduate Attributes and Generic Skills in Remote Teaching

Gamage, K. A. A., Jeyachandran, K., Dehideniya, S. C. P., Lambert, C. & Rennie, A., 3/03/2023, Scholarly Community Encyclopdeia: Education, Scientific Disciplines. Basel, Switzerland: MDPI AG, 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Entry for encyclopedia/dictionary

University Programmes during COVID-19 Pandemic

Rennie, A., Gamage, K. A. A. & Lambert, C., 14/12/2020, Scholarly Community Encyclopdeia: COVID-19. Basel, Switzerland: MDPI AG, 4 p. 4362

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Entry for encyclopedia/dictionary

TecHUB 4.0 - Technology and Entrepreneurship Education for Bridging the Gap in Smart Product Development

Ulmeanu, M., Doicin, C., Roșca, L., Rennie, A., Abram, T. & Bajdor, P., 21/08/2019, MATEC Web of Conferences. Bondrea, I., Cofaru, N. F. & Intă , M. (eds.). Sibiu, Romania: EDP Sciences, Vol. 290. 9 p. 13012

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Minimal Waste Galvonometer Field Correction for Additive Manufacturing

King, B., Bennett, G. R. & Rennie, A., 5/04/2019, 16th Rapid Design, Prototyping & Manufacturing Conference (RDPM2019): Proceedings of the. Rennie, A., Pei, E. & Hackney, P. (eds.). 7 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Multivariable Regression Analysis for Optimised Mass Calculation of MEX 3D Printed Parts

Doicin, C.-V., Ulmeanu, M.-E., Rennie, A. & Lupeanu, E., 5/04/2019, 16th Rapid Design, Prototyping & Manufacturing Conference (RDPM2019). Rennie, A., Pei, E. & Hackney, P. (eds.). 7 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Repurposing of metal support structures to form powder for use in additive manufacturing

Powell, D., Rennie, A., Molyneux, A., Burns, N. & Geekie, L., 5/04/2019, 16th Rapid Design, Prototyping & Manufacturing Conference (RDPM2019): Proceedings of the. Rennie, A., Pei, E. & Hackney, P. (eds.). 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Rotation Rectilinear Scan Path Generation for Selective Laser Sintering

King, B. A. T., Rennie, A. E. W., Taylor, J. P. & Walsh, S. M. R., 21/06/2018, Assises Europeennes de la Fabrication Additive.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

University Brand Management through Additive Manufacturing Applications

Doicin, C.-V., Ulmeanu, M.-E., Abram, T. N., Rennie, A. E. W., Cîtu , D., Murzac, R., Tunsoiu, N. & Bărbării, N., 1/06/2018, Proceedings of the 31st IBIMA Conference. Milan, Italy, p. 6716-6727 12 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Post Processing Treatments on Laser Sintered Nylon 12

King, B. A. T., Rennie, A. E. W., Taylor, J. P. & Bennett, G. R., 8/12/2017, Solid Freeform Fabrication 2017: Proceedings of the 28th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference. The Minerals, Metals & Materials Society (TMS), p. 1464-1471 8 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

New Tracheostomy Device Concept: An Additive Manufacturing Challenge in Reducing Late Clinical Complications

Ulmeanu, M.-E., Ulmeanu, L., Doicin, C.-V., Rennie, A. E. W. & Lupeanu, E., 11/2017, Proceedings of the 30th International Business Information Management Association Conference: Vision 2020: Sustainable Economic development, Innovation Management, and Global Growth. Soliman, K. S. (ed.). Madrid, Spain: International Business Information Management Association (IBIMA), p. 2611-2622 12 p. #538

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Adaptive materials: utilising additive manufactured scaffolds to control self-organising material aggregation

Blaney, A., Alexander, J. M., Dunn, N. S., Richards, D. C., Rennie, A. E. W. & Anwar, J., 12/2015, Proceedings of the 14th Rapid Design, Prototyping and Manufacturing Conference. Rennie, A. & Bibb, R. (eds.). Loughborough: Lancaster University, p. 49-57 8 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Deformation simulation of a tyre safety cage in testing of agricultural vehicle tyres

Celik, H. K., Rennie, A. E. W., Dawson, D., Eatough, A., Eatough, J. & Akinci, I., 05/2015, Environmentally Friendly Agriculture and Forestry for Future Generations: International Scientific XXXVI CIOSTA & CIGR Section V Conference 2015. Popov, V. D., Belyakov, V. V., Efimov, V. A., Selikhovkin, A. V., Shirokov, S. N., Ovchinnikova, E. I., Maksimov, D. A., Levchenko, L. V., Smelik, V. A., Ruzhev, V. A., Korostelev, A. A., Lepp, N. V., Shaytarova, O. E. & Belinskaya, I. V. (eds.). St Petersburg, Russian Federation: Saint Petersburg State Agrarian University, p. 172-183 12 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Horizon 2020 TWEETHER project for W-band high data rate wireless communications

Paoloni, C., Letizia, R., Napoli, F., Ni, Q., Rennie, A., Zimmerman, R., Andre, F., Pham, K., Krozer, V., Magne, F., Burciu, I., Ramirez, A., Rocchi, M., Marilier, M. & Vilar, R., 2015, Vacuum Electronics Conference (IVEC), 2015 IEEE International . IEEE, 2 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Non-stochastic lattice structures for novel filter applications fabricated via additive manufacturing

Hasib, H., Rennie, A., Burns, N. & Geekie, L., 11/2014, The Filtration Society 50th Anniversary International Conference and Exhibition: Proceedings of the . The Filtration Society, 10 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Filtration efficiency gains by fabrication using additive manufacturing

Burns, N., Vijayakumar, B., Rennie, A. & Geekie, L., 10/2014, Proceedings of the European Conference on Fluid-Particle Separation. 2 p. M3P2

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Automated software for streamlining optimisation of resource planning for an additive manufacturing system

Lupeanu, M., Rosu, M.-M., Doicin, C., Rennie, A. & Neagu, C., 09/2014, Proceedings of 3rd International Conference Advances in Engineering & Management (ADEM 2014). 8 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Reverse engineering using close range photogrammetry for additive manufactured reproduction of Egyptian artefacts and other objets d'art

Kaufman, J., Rennie, A. & Clement, M., 06/2014, Proceedings of the ASME 2014 12th Biennial Conference on Engineering System Design and Analysis (ESDA 2014): Volume 1: Applied Mechanics; Automotive Systems; Biomedical Biotechnology Engineering; Computational Mechanics; Design; Digital Manufacturing; Education; Marine and Aerospace Applications. American Society of Mechanical Engineers (ASME), 8 p. ESDA2014-20304

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Novel filter designs that deliver filtration benefits produced by metal additive manufacturing

Burns, N., Burns, M., Travis, D., Geekie, L., Rennie, A. & Weston, D. P., 10/2013, Proceedings of AFS 2013 Fall Conference: Innovation in Filter Media and Membranes. 13 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Development of an Engineering Design Academy: Increasing the commercial exposure of undergraduate students

Lambert, C. & Rennie, A., 09/2013, Proceedings of The 30th International Manufacturing Conference: Professional Development of Engineers for Advanced Manufacturing. Dublin, Ireland, p. 473-482 10 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Predicting limit draft force for a chisel tine using FEA based simulation

Celik, K., Rennie, A. & Akinci, I., 09/2013, 5th International Conference Trends in Agricultural Engineering (TAE 2013). p. 112-117 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Non-Linear Stress Analysis for the Bolt Connections of A Chisel Tine Using Finite Element Method

Celik, K., Rennie, A. & Akinci, I., 07/2012, International Conference of Agricultural Engineering (CIGR-AgEng 2012): Proceedings of the . 8 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Design for Manufacture using Functional Analysis and CAD Mould Simulation for Rapid Prototyping and Rapid Tooling: Paper: ESDA2012-82410

Lupeanu, M., Brooks, H., Rennie, A., Celik, K., Neagu, C. & Akinci, I., 07/2012, ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis (ESDA 2012): Proceedings of the . Nantes: American Society of Mechanical Engineers (ASME), 8 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Stress analysis of a sample marine crane’s boom under static loading condition

Celik, K., Caglayan, N., Cinar, R., Ucar, M., Ersoy, H. & Rennie, A., 06/2012, 5th International Mechanical Engineering Forum 2012: Proceedings of the . Prague, Czech Republic, p. 246-256 11 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Function Based Design for Rapid Prototyping: A Medical Industry Application for an Ocular Speculum

Lupeanu, M., Brooks, H., Rennie, A., Hill, D. & Neagu, C., 06/2012, 13th Rapid Design, Prototyping & Manufacturing Conference: Proceedings of the . Bocking, C. & Rennie, A. (eds.). High Wycombe: CRDM Ltd, p. 45-53 9 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Physical Analysis of Maximum Strength of Additive Manufactured Parts: A Case-Based Study

Hambali, R. H., Rennie, A. & McGovern, J., 03/2012, 2nd International Conference on Arts, Social Sciences & Technology: Proceedings of the . Penang, Malaysia, 7 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Optimisation of Build Orientation for FDM Additive Manufactured Products

Hambali, R. H., Vaudelin, M. & Rennie, A., 02/2012, International Conference on Applications and Design in Mechanical Engineering (ICADME 2012): Proceedings of the . Perlis, Malaysia: School of Mechatronic Engineering, UniMAP, 5 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Automated variation in product design: Using visual basics.net programming language to generate product variation

Smith, P. & Rennie, A., 11/2011, Proceedings of the RAPDASA 2011 Conference. 17 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Variable fused deposition modelling: analysis of benefits, concept design and tool path generation

Brooks, H., Rennie, A., Abram, T., McGovern, J. & Caron, F., 10/2011, Innovative Developments in Virtual and Physical Prototyping: Proceedings of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping. CRC PRESS-TAYLOR & FRANCIS GROUP, p. 511-517 7 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Surface finishing techniques for SLM manufactured stainless steel 316L components

Morton, W., Green, S., Rennie, A. & Abram, T., 10/2011, Innovative Developments in Virtual and Physical Prototyping: Proc. of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping. CRC PRESS-TAYLOR & FRANCIS GROUP, p. 503-509 7 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Sizing Optimisation of a Subsoiler Framework using Advanced Engineering Tools

Celik, K., Rennie, A., Topakci, M. & Akinci, I., 07/2011, Proceedings of the XXXIV CIOSTA CIGR V Conference 2011: Efficient and safe production processes in sustainable agriculture and forestry. 9 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Geometry Optimisation of Tools used in Milling of Spherical Surfaces

Neagu, C., Lupeanu, M. & Rennie, A., 07/2011, SIM2011 - Sustainable Intelligent Manufacturing : Proceedings of the 1st International Conference on Sustainable Intelligent Manufacturing. Bartolo, H. (ed.). Leiria, Portugal, p. 87-94 8 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

A Basic Design-Build-Test Experience: Model Wind Turbine using Additive Manufacture

Widden, M., Rennie, A., Quayle, S. & Gunn, K., 23/06/2011, Conference proceedings 7th International CDIO Conference, Technical University of Denmark, 20th – 22nd June 2011. Technical University of Denmark, p. 1039-1048 10 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Deformation simulation of additive manufacturing FDM parts: a case study for greenhouse clips

Celik, H. K., Hambali, R. H., Rennie, A. & Akinci, I., 06/2011, Rapid Design Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 155-162 8 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Variable Fused Deposition Modelling – Concept Design and Tool Path Generation

Brooks, H., Rennie, A., Abram, T., McGovern, J. & Caron, F., 06/2011, Rapid Design, Prototyping and Manufacturing: Proc Twelfth Conference on. p. 113-122 10 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Polarities of function and form using additive manufacturing - where the middle ground might be in achieving a creative balance for SMEs

Kaufman, J., Rennie, A. & Quayle, S., 06/2011, Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 135-143 9 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Additive manufacturing technologies and functional analysis used in product development optimization

Lupeanu, M., Rennie, A. & Neagu, C., 06/2011, Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 105-112 8 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Redesign of custom-fitted surgical guide with targeted functional analysis fabricated via SLM

Lupeanu, M., Rennie, A., Eggbeer, D. & Neagu, C., 06/2011, Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 173-181 9 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Product Optimization by Rapid Manufacturing and Targeted Functional Analysis

Lupeanu, M., Rennie, A., Neagu, C. & Celik, K., 2011, 16th European Forum on Rapid Prototyping and Manufacturing: Proceedings of the. 14 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Effect of build orientation on FDM parts: a case study for validation of deformation behaviour by FEA

Hambali, R. H., Celik, K., Smith, P., Rennie, A. & Ucar, M., 09/2010, International Conference on Design and Concurrent Engineering (iDECON 2010): Manufacturing Challenges Towards Global Sustainability. Penerbit Universiti (UTeM), p. 224-228 5 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Skills development of employees at SMEs in the construction sector in the North of England

Ganah, A. & Rennie, A., 09/2010, The Construction, Building and Real Estate Research Conference of the Royal Institution of Chartered Surveyors (COBRA 2010): Proceedings of. Royal Institution of Chartered Surveyors (RICS), 10 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Placing postgraduate research students at the heart of knowledge exchange: benefits for academia and industry

Lambert, C. & Rennie, A., 1/07/2010, Proceedings of the 3rd International Symposium for Engineering Education (ISEE2010): educating engineers for a changing world : leading transformation from an unsustainable global society. p. 485-493 9 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Using additive manufacturing effectively: a CAD tool to support decision making

Smith, P. & Rennie, A., 07/2010, 36th International MATADOR Conference. Hinduja, S. & Li, L. (eds.). Springer-Verlag, p. 381-384 4 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

A comparison of carbon footprint calculations for end of life product recovery methods using PAS 2050

Appleby, M., Lambert, C., Rennie, A. & Buckley, A., 07/2010, Proceedings of the ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis: (ESDA 2010). ASME, 9 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Computer Aided Material Selection (CAMS) for Additive Manufacturing Materials

Smith, P. & Rennie, A., 06/2010, 11th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Jacobson, D., Rennie, A. & Bocking, C. (eds.). High Wycombe: CRDM Ltd, p. 55-61 7 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

A Computer Aided Design (CAD) support tool for parametric design of products for Rapid Manufacture (RM)

Smith, P. & Rennie, A., 10/2009, 4th International Conference on Advanced Research in Virtual and Rapid Prototyping: Proceedings of the . Leiria, Portugal: Taylor & Francis Group, p. 95-100 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Effect of Thermal and Mechanical Deformation of Metamaterial FDM Components

Celik, H. K., Tan, Y., Seviour, R. & Rennie, A., 09/2009, US _ TURKEY Workshop on Rapid Technologies (RapidTech 2009). p. 83-88 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Barriers to training for employees at SMEs in the construction sector

Ganah, A. & Rennie, A., 07/2009, The First TG 59 International People in Construction Conference. p. 138-146 9 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Assistive CAD Tools: A Review of Automated Design Methods within Computer Aided Design

Smith, P. & Rennie, A., 06/2009, Rapid Design, Prototyping and Manufacturing: Proceedings of the Tenth National Conference on . Rennie, A., Bocking, C. & Jacobson, D. (eds.). High Wycombe: MJA Print, p. 17-25 9 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

A review of suitable methods for producing automated or semi automated product designs for production using RM technologies

Rennie, A. & Smith, P., 2009, 14th European Forum on Rapid Prototyping and Manufacturing: Proceedings of the. 7 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

A Comprehensive Business Model for Rapid Manufactured Products

Hasan, S. & Rennie, A., 10/2008, 19th International Symposium of the Danube-Adria-Association-for-Automation-and-Manufacturing - Intelligent Manufacturing & Automation: Focus on Next Generation of Intelligent Systems and Solutions. Vienna: DAAAM International, p. 591-592 2 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Development of an Additive Layer Manufacturing business model: creating an environment to support designers from concept to distribution

Ariadi, Y., Hasan, S., Smith, P. & Rennie, A., 06/2008, Proceedings of 32nd Japan Rapid Prototyping Symposium. p. 79-84 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

A transnational approach to the implementation of eco-design methodologies in SMEs

Rennie, A., Lambert, C., Baker, N. & Hjelm, O., 10/07/2007, The proceedings of the 5th International Conference on Design & Manufacture for Sustainable Development : Loughborough University, 10th - 11th July 2007.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Lancaster Virtual Prototyping Project: (GONW5167/8EUR – M4-07-LANC)

Rennie, A. E. W., 15/11/2006, Proceedings of the 4th EU Best Practice Conference: New Horizons in Graz..

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Injection Mould Tool Manufacture in Less Than Five Days

Jacobson, D. M., Bocking, C. E. & Rennie, A., 03/2002, RAPRA Rapid Tooling Conference 2002: Conference Proceedings. RAPRA, p. 35-43 9 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Electroforming of a Thermojet Master Pattern for use as an Electro-Discharge Machine Electrode

Bocking, C., Rennie, A., Bennett, G. & Lewis, N., 10/2000, Time Compression Technologies 2000 Conference: Proceedings of. Rapid News Publications PLC, p. 151-156 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Electroforming of a Stereolithography Master Pattern for use as an Electro-Discharge Machine electrode

Rennie, A., Bocking, C. E. & Bennett, G. R., 07/2000, Proceedings of the 33rd International MATADOR Conference: Formerly The International Machine Tool Design and Research Conference. Springer-Verlag, p. 301-306 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Development of a Continuous Droplet Generation System of Molten Metals using Electromotive Forces, with a View to its use in the Rapid Tooling Industry

Rennie, A. & Bennett, G. R., 07/1997, Proceedings of the Thirty-Second International Manufacturing, Automation and Systems, Technology, Applications, Design, Organisation and Management, Research (MATADOR) Conference. p. 399-403 5 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

A Short Review on 4D Printing

Khan, F., Celik, H. K., Oral, O. & Rennie, A. E. W., 04/2018, 3rd International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry 2018. Çetinkaya, K., Özsoy, K., Duman, B. & Kayaalp, K. (eds.). Antalya, Turkey, p. 199-203 5 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract

Determination of Time Dependent Stress Distribution on Potato Tubers at Mechanical Collision

Celik, H. K., Cinar, R., Rennie, A. E. W., Ulmeanu, M.-E. & Akinci, I., 04/2018, CIGR 2018: XIX World Congress of CIGR: "Sustainable Life for Children". Akinci, I., Aykas, E. & Güngör , Ö. (eds.). Antalya, Turkey, p. 123 1 p. OP-081 [Section VI: Bioprocesses]

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract