Allan Rennie - Publications & Outputs - Research Portal

Professor Allan Rennie

Professor in Manufacturing Engineering & Director of Engagement

1 - 100 out of 246Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Title

Published
Viscous Layer Formation in Electrochemical Polishing Laser-Powder Bed Fusion Parts with Different Surface Profiles
Zhu, H., Tian, Y. & Rennie, A., 30/07/2023, Springer Tracts in Additive Manufacturing: Proceedings of CASICAM 2022. Zarbane, K. & Beidouri, Z. (eds.). Cham: Springer Nature, p. 219-228 10 p. (Springer Tracts in Additive Manufacturing).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review
Published
Virtual Trading System for Rapid Manufactured Products
Hasan, S. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 127-135 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Unpublished
Virtual Prototyping Phase III
Rennie, A., 01/2007, (Unpublished) N/A. 54 p.
Research output: Book/Report/Proceedings › Commissioned report
Published
Virtual Prototyping Phase II
Rennie, A., 05/2006, N/A. 37 p.
Research output: Book/Report/Proceedings › Commissioned report
Published
Virtual Prototyping
Rennie, A., 07/2005, N/A. 77 p.
Research output: Book/Report/Proceedings › Commissioned report
Published
Variable Fused Deposition Modelling – Concept Design and Tool Path Generation
Brooks, H., Rennie, A., Abram, T., McGovern, J. & Caron, F., 06/2011, Rapid Design, Prototyping and Manufacturing: Proc Twelfth Conference on. p. 113-122 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Variable fused deposition modelling: analysis of benefits, concept design and tool path generation
Brooks, H., Rennie, A., Abram, T., McGovern, J. & Caron, F., 10/2011, Innovative Developments in Virtual and Physical Prototyping: Proceedings of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping. CRC PRESS-TAYLOR & FRANCIS GROUP, p. 511-517 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Utilising Multi-Material PolyJet Additive Manufacturing for the Design and Fabrication of Prototype Flood Protection Door Seals
Walsh, S. M. R., Rennie, A. E. W., Abram, T. N., Snape, M. & Roberts, L., 27/04/2017. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Using additive manufacturing to build energy efficient filter supports
Vijayakumar, B., Rennie, A., Burns, N., Burns, M., Travis, D. & Battersby, P., 10/2013. 9 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Using additive manufacturing effectively: a CAD tool to support decision making
Smith, P. & Rennie, A., 07/2010, 36th International MATADOR Conference. Hinduja, S. & Li, L. (eds.). Springer-Verlag, p. 381-384 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Use of FDM in an undergraduate student project: design, build and test a model wind turbine
Widden, M., Gunn, K. & Rennie, A., 09/2010, 3rd International Conference on Additive Technologies (iCAT 2010); DAAAM Specialized Conference. DAAAM International, 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
University Programmes during COVID-19 Pandemic
Rennie, A., Gamage, K. A. A. & Lambert, C., 14/12/2020, Scholarly Community Encyclopdeia: COVID-19. Basel, Switzerland: MDPI AG, 4 p. 4362
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Entry for encyclopedia/dictionary
Published
University Brand Management through Additive Manufacturing Applications
Doicin, C.-V., Ulmeanu, M.-E., Abram, T. N., Rennie, A. E. W., Cîtu , D., Murzac, R., Tunsoiu, N. & Bărbării, N., 1/06/2018, Proceedings of the 31st IBIMA Conference. Milan, Italy, p. 6716-6727 12 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Understanding powder degradation in metal additive manufacturing to allow the upcycling of recycled powders
Powell, D., Rennie, A., Geekie, L. & Burns, N., 20/09/2020, In: Journal of Cleaner Production. 268, 15 p., 122077.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Two-Steps Electrochemical Polishing of Laser Powder Bed Fusion 316L Stainless Steel
Zhu, H., Rennie, A., Li, R. & Tian, Y., 31/12/2022, In: Surfaces and Interfaces. 35, 12 p., 102442.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Tuning the wettability of wire mesh column: pore-scale flow analysis
Abdelraouf, M., Rennie, A., Burns, N., Geekie, L., Najdanovic-Visak, V. & Aiouache, F., 15/11/2021, In: Chemical Engineering Journal Advances. 8, 15 p., 100181.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Touching history: 3D replica artifacts
Kaufman, J. & Rennie, A., 12/2014, Ancient Egypt, 15, 3, p. 32-33 2 p.
Research output: Contribution to specialist publication › Article
Published
Tool Life Performance of Injection Mould Tooling Fabricated by Selective Laser Melting for High-Volume Production
El Kashouty, M., Rennie, A. & Ghazy, M., 26/11/2019, In: Materials. 12, 23, 23 p., 3910.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Time-Dependant Human Mastication Simulation of Agricultural Products and Its Rapid Prototyping Aided Evaluation: A Case Study for Pecan Kernel Mastication
Celik, H. K., Rennie, A. E. W., Er, K., Abram, T. N. & Akinci, I., 27/04/2017. 10 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
The wear of High Speed Selective Jet Electrodeposition electrodes when used as EDM tools
Dover, S. J., Rennie, A. & Bennett, G. R., 11/1996, Proceedings of the Second National Conference on developments in rapid prototyping and tooling. Mechanical Engineering Publications Ltd, p. 187-199 13 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
The use of additive manufacture for metallic bipolar plates in polymer electrolyte fuel cell stacks
Dawson, R., Patel, A., Rennie, A. & White, S., 28/09/2014, In: Chemical Engineering Transactions. 41, p. 175-180 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Unpublished
The UK Business Support Simplification Programme: A Case Study for the North West Universities Association from Lancaster University : Invited paper for the UK consultation process for DBERR's initiative to streamline business support services
Lambert, C., Rennie, A. & Williams, D., 2008, (Unpublished) 10 p.
Research output: Working paper
Published
The state of additive manufacturing in dental research – A systematic scoping review of 2012–2022
Celik, H. K., Koc, S., Kustarci, A., Caglayan, N. & Rennie, A., 20/06/2023, In: Heliyon. 9, 6, 13 p., e17462.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Unpublished
The SME Carbon Game: Issues faced when developing a Carbon Footprint Toolkit for SMEs
wrigley, S., Lambert, C. & Rennie, A., 06/2008, (Unpublished). 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
The role of technical functional analysis in innovative design of bespoke rapid manufactured parts: medical industry applications
Lupeanu, M., Rosu, M.-M., Rennie, A., Neagu, C. & Brooks, H., 06/2013, Advances in Production, Automation and Transportation Systems: Proceedings of the 6th WSEAS International Conference on Manufacturing Engineering, Quality and Production Systems (MEQAPS13) and 4th International Conference on Automotive and Transportation Systems (ICAT13). Brasov, Romania: WSEAS Press, Vol. 13. p. 227-232 6 p. (Mathematics and Computers in Science and Engineering Series; vol. 13).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
The lost crown of Horus
Kaufman, J. & Rennie, A. E. W., 04/2015, Ancient Egypt, 15, 5, p. 22-23 2 p.
Research output: Contribution to specialist publication › Article
Published
The Fabrication of MMC Electronic Packages using Thin Shell Electroformed (TSE) EDM Electrodes
Bocking, C., Jacobson, D. M., Rennie, A. & Bennett, G., 10/2001. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
The Fabrication of Electronic Packages from High Silicon Aluminium Alloys Using Thin Shell Electroformed (TSE) EDM Electrodes
Rennie, A. E. W., Bennett, G., Bocking, C. & Jacobson, D., 1/05/2002, In: Transactions of the Institute of Metal Finishing. 80, 3, p. 92-96 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The development of an innovative SME-focused toolset integrating carbon footprint calculation with lean manufacturing waste reduction techniques
Wrigley, S., Lambert, C. & Rennie, A., 08/2008. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
Published
The business model for the functional rapid manufacturing supply chain
Hasan, S., Rennie, A. & Hasan, J., 01/2014, In: Studia Commercialia Bratislavensia. 6, 24, p. 536-552 17 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The application of rapid manufacturing technologies in the spare parts industry
Hasan, S. & Rennie, A., 08/2008, Sild Freeform Fabrication Symposium 2008. University of Texas at Austin, p. 584-590 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Templates for consumer use in designing customised products
Ariadi, Y. & Rennie, A., 08/2008, Solid Freeform Fabrication Symposium 2008. University of Texas at Austin, p. 450-458 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
TecHUB 4.0 - Technology and Entrepreneurship Education for Bridging the Gap in Smart Product Development
Ulmeanu, M., Doicin, C., Roșca, L., Rennie, A., Abram, T. & Bajdor, P., 21/08/2019, MATEC Web of Conferences. Bondrea, I., Cofaru, N. F. & Intă , M. (eds.). Sibiu, Romania: EDP Sciences, Vol. 290. 9 p. 13012
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Surface Flatness Measurement in Stereolithography
Male, J. C., Rennie, A. & Bennett, G. R., 06/2000, The Eighth International Conference on Rapid Prototyping: Proc. of. The University of Dayton, p. 111-117 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Surface finishing techniques for SLM manufactured stainless steel 316L components
Morton, W., Green, S., Rennie, A. & Abram, T., 10/2011, Innovative Developments in Virtual and Physical Prototyping: Proc. of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping. CRC PRESS-TAYLOR & FRANCIS GROUP, p. 503-509 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Study regarding the influence of material type on economic objectives in MEx fabrication
Ulmeanu, M.-E., Doicin, C.-V., Roșca, L., Rennie, A., Abram, T. & Nuță, A.-B., 4/08/2021, In: MATEC Web of Conferences. 343, 11 p., 02009.
Research output: Contribution to Journal/Magazine › Conference article › peer-review
Published
Structural Strength Analysis of a Rotary Drum Mower in Transportation Position
Celik, H. K., Akinci, I., Caglayan, N. & Rennie, A., 16/10/2023, In: Applied Sciences. 13, 20, 18 p., 11338.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Structural strength analysis of a rotary drum mower during harvesting
Celik, H. K., Akinci, I., Caglayan, N. & Rennie, A., 16/02/2024, In: Journal of Agricultural Engineering. 55, 1, 23 p., 1557.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Structural optimisation of a subsoiler
Topakci, M., Celik, H. K., Canakci, M., Karayel, D. & Rennie, A., 09/2010, In: Pakistan Journal of Scientific and Industrial Research. 53, 5, p. 281-287 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Stress analysis of a sample marine crane’s boom under static loading condition
Celik, K., Caglayan, N., Cinar, R., Ucar, M., Ersoy, H. & Rennie, A., 06/2012, 5th International Mechanical Engineering Forum 2012: Proceedings of the . Prague, Czech Republic, p. 246-256 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Strength-based Design Analysis of a Para-Plow Tillage Tool
Celik, H. K., Caglayan, N., Topakci, M., Rennie, A. & Akinci, I., 29/02/2020, In: Computers and Electronics in Agriculture. 169, 15 p., 105168.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Strength-Based Design Analysis of a Damaged Engine Mounting Bracket Designed for a Commercial Electric Vehicle
Celik, H. K., Ersoy, H., Dogan, A., Eravci, G., Rennie, A. & Akinci, I., 31/08/2021, In: Journal of Failure Analysis and Prevention. 21, 4, p. 1315-1322 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Sol-gel alumina coating of wired mesh packing
Aiouache, F., Abdelraouf, M., Hegarty, J., Rennie, A., Elizalde, R., Burns, N., Geekie, L. & Najdanovic, V., 1/09/2020, In: Ceramics International. 46, 13, p. 20777-20787 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Social Design Fiction. New Methods for the Design of Emerging Technology.
Pilling, M., Richards, D., Dunn, N. & Rennie, A., 31/05/2019, In: The Design Journal. 22, sup1, p. 1993-2005 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
SME expectations and experiences
Seward, D., Quayle, S., Rennie, A. & Taylor, S., 2005. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Speech
Published
SME application of LCA-based carbon footprints
Moss, J., Lambert, C. & Rennie, A., 06/2008, In: International Journal of Sustainable Engineering. 1, 2, p. 132-141 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Skills development of employees at SMEs in the construction sector in the North of England
Ganah, A. & Rennie, A., 09/2010, The Construction, Building and Real Estate Research Conference of the Royal Institution of Chartered Surveyors (COBRA 2010): Proceedings of. Royal Institution of Chartered Surveyors (RICS), 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Sizing Optimisation of a Subsoiler Framework using Advanced Engineering Tools
Celik, K., Rennie, A., Topakci, M. & Akinci, I., 07/2011, Proceedings of the XXXIV CIOSTA CIGR V Conference 2011: Efficient and safe production processes in sustainable agriculture and forestry. 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Single camera photogrammetry for reverse engineering and fabrication of ancient and modern artifacts
Kaufman, J., Rennie, A. E. W. & Clement, M., 2015, In: Procedia CIRP. 36, p. 223-229 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Single camera photogrammetry for reverse engineering and fabrication of ancient and modern artefacts
Kaufman, J., Rennie, A. & Clement, M., 03/2015. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Simulation-based assessment of the structural impact response of the Cura Baglama: a drop test approach for wooden stringed musical instruments
Celik, H. K., Cinar, R. & Rennie, A., 2/07/2025, In: European Journal of Wood and Wood Products. 83, 4, 13 p., 133.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Simulation of flow characteristics for filters designed with a non-stochastic lattice structure fabricated via additive manufacturing
Hasib, H., Rennie, A. E. W., Burns, N. & Geekie, L., 12/2015, p. 153-158. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Simulation and manufacture of wax toolfaces for the creation of silicone rubber tools using Magics™ RP software
Rennie, A. & Bennett, G. R., 2000, In: International Journal of Engineering Simulation. 1, 3, p. 24-30 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Selective laser melting for near net-shape manufacturing: Investigation into structure-parameter relationships and phase determination by X-ray diffraction in stainless steel alloy systems
Green, S., OMeara, N. & Rennie, A., 2011. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Selective Laser Melting for improving quality characteristics of a prism shaped topology injection mould tool insert for the automotive industry
El Kashouty, M., Rennie, A., Ghazy, M. & El Aziz, A. A., 1/12/2021, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 235, 23, 12 p., 989382.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rotation Rectilinear Scan Path Generation for Selective Laser Sintering
King, B. A. T., Rennie, A. E. W., Taylor, J. P. & Walsh, S. M. R., 21/06/2018, Assises Europeennes de la Fabrication Additive.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Review on Additive Manufacturing of Multi-Material Parts: Progress and Challenges
Hasanov, S., Alkunte, S., Rajeshirke, M., Gupta, A., Huseynov, O., Fidan, I., Alifui-Segbaya, F. & Rennie, A., 27/12/2021, In: Journal of Manufacturing and Materials Processing. 6, 1, 32 p., 4.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Reverse engineering using close range photogrammetry for additive manufactured reproduction of Egyptian artefacts and other objets d'art
Kaufman, J., Rennie, A. & Clement, M., 06/2014, Proceedings of the ASME 2014 12th Biennial Conference on Engineering System Design and Analysis (ESDA 2014): Volume 1: Applied Mechanics; Automotive Systems; Biomedical Biotechnology Engineering; Computational Mechanics; Design; Digital Manufacturing; Education; Marine and Aerospace Applications. American Society of Mechanical Engineers (ASME), 8 p. ESDA2014-20304
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Reverse engineering using close range photogrammetry for additive manufactured reproduction of Egyptian artefacts and other objets d'art
Kaufman, J., Rennie, A. & Clement, M., 1/03/2015, In: Journal of Computing and Information Science in Engineering. 15, 1, 7 p., 011006.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Reverse engineering approach for precise measurement of the physical attributes related to the geometric features of agricultural products
Celik, H. K., Rennie, A. E. W. & Akinci, I., 03/2017, In: Journal of Food Measurement and Characterization. 11, 1, p. 75-84 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Research strategy on developing additive manufactured bespoke ophthalmic instruments assisted by an online integrated platform
Lupeanu, M., Rennie, A., Rosu, M.-M. & Moagar-Poladian, G., 04/2014, In: Buletinul Ştiinţific al Universităţii Politehnica Bucureşti, Seria D – Inginerie Mecanică. 76, 2, p. 143-162 20 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Research on deploying technical functional analysis for additive manufacturing of a surgical device for intravitreal interventions
Lupeanu, M., Brooks, H., Rennie, A. & Hill, D., 2013, In: Buletinul Ştiinţific al Universităţii Politehnica Bucureşti, Seria D – Inginerie Mecanică. 75, 1, p. 141-160 20 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Requirements for large-scale adoption of rapid manufacturing technologies
Hasan, S., Rennie, A., Hoque, M. R. & Ahmed, N., 24/05/2019, In: Cogent Business & Management. 6, 1, 22 p., 1623151.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Repurposing of metal support structures to form powder for use in additive manufacturing
Powell, D., Rennie, A., Molyneux, A., Burns, N. & Geekie, L., 5/04/2019, 16th Rapid Design, Prototyping & Manufacturing Conference (RDPM2019): Proceedings of the. Rennie, A., Pei, E. & Hackney, P. (eds.). 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Relationship Between Wall Thickness and Erosion Depth of Thin Walled Electroformed EDM Electrodes Produced from RP Models
Bocking, C. E., Rennie, A. & Bennett, G. R., 08/2000, 11th International Solid Freeform Fabrication Symposium (SFF 2000). University of Texas at Austin, p. 469-477 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Redesign of custom-fitted surgical guide with targeted functional analysis fabricated via SLM
Lupeanu, M., Rennie, A., Eggbeer, D. & Neagu, C., 06/2011, Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 173-181 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Unpublished
Redesign of custom-fitted surgical guide with targeted functional analysis fabricated via SLM
Lupeanu, M., Rennie, A. & Neagu, C., 31/03/2014, (Unpublished).
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
Rapid Prototyping, Tooling and Manufacturing: Proc. Third National Conference on
Rennie, A. E. W. (Editor), Jacobson, D. M. (Editor) & Bocking, C. (Editor), 2002, Professional Engineering Publishing. 173 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid prototyping using electrodeposition of copper
Dover, S. J., Rennie, A. & Bennett, G. R., 08/1996, Solid Freeform Fabrication Symposium 1996. University of Texas at Austin, p. 191-198 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Rapid Prototyping and Flow Simulation Applications in Design of Agricultural Irrigation Equipment: Case Study for a Sample In-Line Drip Emitter
Celik, K., Karayel, D., Caglayan, N., Rennie, A. & Akinci, I., 06/2010, 11th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Jacobson, D., Rennie, A. & Bocking, C. (eds.). High Wycombe: CRDM Ltd, p. 181-191 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Rapid prototyping and flow simulation applications in design of agricultural irrigation equipment: Case study for a sample in-line drip emitter: The paper is to study CFD and RP application samples on the design issues associated with agricultural irrigation equipment
Celik, K., Karayel, D., Caglayan, N., Rennie, A. & Akinci, I., 03/2011, In: Virtual and Physical Prototyping. 6, 1, p. 47-56 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rapid Production of Microwave Packaging in Silicon-Aluminium by Thin-Shell Electroforming
Bocking, C., Jacobson, D. M. & Rennie, A., 06/2001, 13th European Microelectronics and Packaging Conference & Exhibition, Proceedings of: iMAPS Strasbourg 2001, "The Millenium Conference". p. 412-415 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Rapid production of microwave packaging in Silicon Aluminium by thin-shell electroforming
Bocking, C., Jacobson, D. M. & Rennie, A. E. W., 01/2002, In: Microelectronics International. 19, 1, p. 30-32 3 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Unpublished
Rapid Manufacturing Design Tools
Smith, P. & Rennie, A., 12/2008, (Unpublished). 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Unpublished
Rapid Manufacturing Design Scenarios
Smith, P. & Rennie, A., 12/2007, (Unpublished). 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
Rapid manufacturing complex geometries for high-power microwave applications
Seviour, R., Rennie, A. & Celik, H. K., 12/2009.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Rapid Design, Prototyping and Manufacturing: Proceedings of the Tenth National Conference on
Rennie, A. (Editor), Bocking, C. E. (Editor) & Jacobson, D. M. (Editor), 2009, MJA Print. 123 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid Design, Prototyping and Manufacturing: Proceedings of the Eleventh National Conference on
Jacobson, D. M. (Editor), Rennie, A. (Editor) & Bocking, C. E. (Editor), 2010, CRDM Ltd. 222 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on
Rennie, A. (Editor) & Bocking, C. E. (Editor), 06/2011, CRDM Ltd. 203 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid Design, Prototyping and Manufacturing: Proceedings of the Thirteenth Conference on
Bocking, C. E. (Editor) & Rennie, A. (Editor), 06/2012, High Wycombe: CRDM Ltd. 109 p.
Research output: Book/Report/Proceedings › Proceedings
Published
Rapid design, prototyping and manufacturing: Proceedings of the Ninth National Conference on
Rennie, A. (Editor), Jacobson, D. M. (Editor) & Bocking, C. E. (Editor), 2008, MJA Print. 173 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid design, prototyping and manufacturing
Rennie, A., Aitchison, D. (Editor) & Jacobson, D. M., 12/2010, In: Virtual and Physical Prototyping. 5, 4, p. 181-181 1 p.
Research output: Contribution to Journal/Magazine › Editorial
Published
Rapid design, prototyping and manufacture: proceedings of the seventh national conference on
Bocking, C. E. (Editor), Rennie, A. E. W. (Editor) & Jacobson, D. M. J. (Editor), 2006, MJA Print. 134 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid design, prototyping and manufacture: Proceedings of the Fifth National Conference on
Jacobson, D. M. (Editor), Rennie, A. (Editor) & Bocking, C. E. (Editor), 2004, Professional Engineering Publishing. 111 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid design, prototyping and manufacture: Proceedings of the Sixth National Conference on
Rennie, A. (Editor), Jacobson, D. M. (Editor) & Bocking, C. E. (Editor), 2005, X-CD Technologies Inc. 129 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid design, prototyping and manufacture: Proceedings of the Eighth National Conference on
Jacobson, D. M. (Editor), Bocking, C. E. (Editor) & Rennie, A. (Editor), 2007, MJA Print. 140 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid and virtual prototyping and applications: Proceedings of the Fourth National Conference on (Incorporating RAPTIA (Rapid Prototyping and Tooling - Industrial Applications) State-of-the-Art Reports
Bocking, C. E. (Editor), Rennie, A. (Editor) & Jacobson, D. M. (Editor), 2003, Professional Engineering Publishing. 330 p.
Research output: Book/Report/Proceedings › Book
Unpublished
Production of fluid dynamically improved filters using additive manufacturing
Vijayakumar, B., Rennie, A. & Burns, N., 18/12/2012, (Unpublished).
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
Product re-design using advanced engineering applications and function analysis: a case study for greenhouse clips
Celik, K., Lupeanu, M., Rennie, A., Neagu, C. & Akinci, I., 10/2013, In: Journal of the Brazilian Society of Mechanical Sciences and Engineering. 35, 3, p. 305-318 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Product Optimization by Rapid Manufacturing and Targeted Functional Analysis
Lupeanu, M., Rennie, A., Neagu, C. & Celik, K., 2011, 16th European Forum on Rapid Prototyping and Manufacturing: Proceedings of the. 14 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Proceedings of the 14th Rapid Design, Prototyping and Manufacturing Conference
Rennie, A. E. W. (Editor) & Bibb, R. (Editor), 2016, Lancaster: Lancaster University. 165 p.
Research output: Book/Report/Proceedings › Proceedings
Published
Pressure Drop and Velocity Simulations in Non-Stochastic Structures - Filters Fabricated by Additive Manufacturing
Hasib, H., Rennie, A. E. W., Burns, N. & Geekie, L., 04/2016, In: Filtration. 16, 2, p. 97-102 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Pressure drop and velocity simulations in non-stochastic lattice structure for filter applications fabricated using additive manufacturing
Hasib, H., Rennie, A. E. W., Burns, N. & Geekie, L., 12/2015. 8 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Pressure determination approach in specific pressure region and FEM based stress analysis of the housing of an external gear pump
Cinar, R., Ucar, M., Celik, K., Firat, M. Z. & Rennie, A., 04/2016, In: Experimental Techniques. 40, 2, p. 489-499 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Predicting limit draft force for a chisel tine using FEA based simulation
Celik, K., Rennie, A. & Akinci, I., 09/2013, 5th International Conference Trends in Agricultural Engineering (TAE 2013). p. 112-117 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Powder Characterization – Methods, Standards and State of the Art
Groarke, R., Vijayaraghavan, R. K., Powell, D., Rennie, A. & Brabazon, D., 1/06/2021, Fundamentals of Laser Powder Bed Fusion of Metals. Yadroitsev, I., Yadroitsava, I., Du Plessis, A. & MacDonald, E. (eds.). Elsevier, p. 491-527 37 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Potential of Rapid Tooling in Rapid Heat Cycle Molding: A Review
Huzaim, N. H. M., Rahim, S., Musa, L., Abdellah, A. E.-H., Abdullah, M. M. A. B., Rennie, A., Rahman, R., Garus, S., Błoch, K., Sandu, A. V., Vizureanu, P. & Nabiałek, M., 23/05/2022, In: Materials. 15, 10, 39 p., 3725.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Potential of New Sustainable Green Geopolymer Metal Composite (GGMC) Material as Mould Insert for Rapid Tooling (RT) in Injection Moulding Process
Yin, A. T. M., Rahim, S. Z. B. A., Abdullah, M. M. A. B., Nabiałek, M., Abdellah, A. E.-H., Rennie, A., Tahir, M. F. M. & Titu, A. M., 19/02/2023, In: Materials. 16, 4, 38 p., 1724.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Post Processing Treatments on Laser Sintered Nylon 12
King, B. A. T., Rennie, A. E. W., Taylor, J. P. & Bennett, G. R., 8/12/2017, Solid Freeform Fabrication 2017: Proceedings of the 28th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference. The Minerals, Metals & Materials Society (TMS), p. 1464-1471 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Polarities of function and form using additive manufacturing - where the middle ground might be in achieving a creative balance for SMEs
Kaufman, J., Rennie, A. & Quayle, S., 06/2011, Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 135-143 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Previous 1 2 3 Next

Research

Professor Allan Rennie

Quick Links

Connect With Us