Home > Research > Researchers > Dr Andrew Pinkerton > Publications

Research

Dr Andrew Pinkerton

Senior Lecturer

51 - 100 out of 119Page size: 50
RSS feed of this list
Sort by: Type
  1. Conference contribution/Paper
  2. Published

    Combined wire and powder feeding laser direct metal deposition for rapid prototyping

    Syed, W. U. H., Pinkerton, A. J. & Li, L., 2004, Proceedings of the 23rd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  3. Published

    Modelling the temperature effects of melt pool position and wall height in additive manufacturing by direct laser deposition

    Pinkerton, A. J. & Li, L., 2003, Proceedings of the 1st International Conference on Advanced Research in Virtual and Rapid Prototyping. Bartolo, P. J., Mitchell, G., Mateus, A., Batista, F., Vasco, J., Correia, M., Andre, N., Lima, P., Novo, P., Custodio, P. & Martinho, P. (eds.). Leiria: Escola Superior Tecnologia Gestao Leiria, p. 224-231 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  4. Published

    The effect of diode laser beam shape and traverse direction on the direct metal deposition process

    Pinkerton, A. J. & Li, L., 2003, Proceedings of the 22nd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  5. Published

    Direct metal deposition by diode laser: modelling the effect of increased beam coupling

    Pinkerton, A. J. & Li, L., 2003, Proceedings of the 22nd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  6. Published

    A verified model of the behaviour of the axial powder stream concentration from a coaxial laser cladding nozzle

    Pinkerton, A. J. & Li, L., 2002, Proceedings of the 21st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  7. Published

    A comparative study of multiple layer laser deposition using water and gas atomised 316L stainless steel powders

    Pinkerton, A. J. & Li, L., 2002, Proceedings of the 21st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  8. Conference paper
  9. Published

    Alternative nozzle and metal delivery methods for laser-assisted metal deposition: (invited paper & presentation)

    Pinkerton, A. J., 2005.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  10. Published

    Direct laser deposition layer profiles and the factors affecting them

    Pinkerton, A. J. & Li, L., 2002.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  11. Poster
  12. Published

    Underwater Cutting of Metals with Photons

    Cheneler, D., Pinkerton, A., Khan, A. & Nyamayaro, C., 3/07/2018.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  13. Published

    Laser rapid manufacturing process advancement through powder morphology

    Pinkerton, A. J., 2002.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review

  14. Other contribution
  15. Published

    Advances and challenges in the modelling of laser melt pool processes: Keynote presentation at the Interfinish SERIA 2013 Asia-Pacific International Conference on Surface Engineering for Research and Industrial Applications

    Pinkerton, A., 2013

    Research output: Other contribution

  16. Journal article
  17. Published

    Lasers in additive manufacturing

    Pinkerton, A. J., 04/2016, In: Optics and Laser Technology. 78, Part A, p. 25-32 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  18. Published

    Advances in the modelling of laser direct metal deposition (invited)

    Pinkerton, A., 02/2015, In: Journal of Laser Applications. 27, S1, 7 p., S15001.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  19. Published

    Combined vibration and thermal analysis for the condition monitoring of rotating machinery

    Nembhard, A., Sinha, J., Pinkerton, A. & Elbhbah, K., 05/2014, In: Structural Health Monitoring. 13, 3, p. 281-295 15 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  20. Published

    Parametric study of development of inconel-steel functionally graded materials by laser direct metal deposition

    Shah, K., ul Haq, I., Khan, A., Shah, S. A., Khan, M. & Pinkerton, A., 02/2014, In: Materials and Design. 54, p. 531-538 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  21. Published

    Direct laser deposition with different types of 316L steel particle: a comparative study of final part properties

    Mahmood, K. & Pinkerton, A., 04/2013, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 227, 4, p. 520-531 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  22. Published

    An anisotropic enhanced thermal conductivity approach for modelling laser melt pools for Ni-base super alloys

    Safdar, S., Pinkerton, A. J., Li, L., Sheikh, M. & Withers, P., 1/02/2013, In: Applied Mathematical Modelling. 37, 3, p. 1187-1195 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  23. Published

    Vibration-based delamination detection in a composite plate

    Ullah, I., Sinha, J. & Pinkerton, A., 2013, In: Mechanics of Advanced Materials and Structures. 20, 7, p. 536-551 16 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  24. Published

    Laser clad corrosion protection for mild and harsh environments

    Mahmood, K., Stevens, N. & Pinkerton, A. J., 09/2012, In: Surface Engineering. 28, 8, p. 576-584 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  25. Published

    Laser surface modification using Inconel 617 machining swarf as coating material

    Mahmood, K., Stevens, N. & Pinkerton, A. J., 06/2012, In: Journal of Materials Processing Technology. 212, 6, p. 1271-1280 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  26. Published

    Characterization of weld bead geometry in fibre laser butt welding of mild steel sheets by means of statistical modelling

    Eghlio, R. M., Pinkerton, A. J. & Li, L., 2012, In: Lasers in Engineering. 22, 5-6, p. 281-298 18 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  27. Published

    Numerical investigation of powder heating in coaxial laser metal deposition

    Ibarra-Medina, J. & Pinkerton, A. J., 11/2011, In: Surface Engineering. 27, 10, p. 754-761 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  28. Published

    A comparative study of laser direct metal deposition characteristics using gas and plasma-atomized Ti-6Al-4V powders

    Ahsan, M. N., Pinkerton, A. J., Moat, R. J. & Shackleton, J., 25/09/2011, In: Materials Science and Engineering: A. 528, 25-26, p. 7648-7657 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  29. Published

    An analytical-numerical model of laser direct metal deposition track and microstructure formation

    Ahsan, M. N. & Pinkerton, A. J., 07/2011, In: Modelling and Simulation in Materials Science and Engineering. 19, 5, p. - 22 p., 055003.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  30. Published

    Microcomputed tomography analysis of intralayer porosity generation in laser direct metal deposition and its causes

    Ahsan, M. N., Bradley, R. & Pinkerton, A. J., 05/2011, In: Journal of Laser Applications. 23, 2, p. - 10 p., 022009.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  31. Published

    Porous structures fabrication by continuous and pulsed laser metal deposition for biomedical applications; modelling and experimental investigation

    Ahsan, M. N., Paul, C. P., Kukreja, L. M. & Pinkerton, A. J., 1/04/2011, In: Journal of Materials Processing Technology. 211, 4, p. 602-609 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  32. Published

    Residual stresses in laser direct metal deposited Waspaloy

    Moat, R. J., Pinkerton, A. J., Li, L., Withers, P. J. & Preuss, M., 15/03/2011, In: Materials Science and Engineering: A. 528, 6, p. 2288-2298 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  33. Published

    Fibre laser welding of dissimilar alloys of Ti-6Al-4V and Inconel 718 for aerospace applications

    Chen, H-C., Pinkerton, A. J. & Li, L., 02/2011, In: International Journal of Advanced Manufacturing Technology. 52, 9-12, p. 977-987 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  34. Published

    Innovative reconsolidation of carbon steel machining swarf by laser metal deposition

    Mahmood, K., Syed, W. U. H. & Pinkerton, A. J., 02/2011, In: Optics and Lasers in Engineering. 49, 2, p. 240-247 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  35. Published

    Gap-free fibre laser welding of Zn-coated steel on Al alloy for light-weight automotive applications

    Chen, H-C., Pinkerton, A. J., Li, L., Liu, Z. & Mistry, A. T., 02/2011, In: Materials and Design. 32, 2, p. 495-504 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  36. Published

    Effects of Melt Pool Variables and Process Parameters in Laser Direct Metal Deposition of Aerospace Alloys

    Shah, K., Pinkerton, A. J., Salman, A. & Li, L., 2010, In: Materials and Manufacturing Processes. 25, 12, p. 1372-1380 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  37. Published

    The effect of continuous and pulsed beam modes on cut path deviation in diode laser cutting of glass

    Nisar, S., Li, L., Sheikh, M. A. & Pinkerton, A. J., 2010, In: International Journal of Advanced Manufacturing Technology. 49, 1-4, p. 167-175 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  38. Published

    The effect of laser beam geometry on cut path deviation in diode laser chip-free cutting of glass

    Nisar, S., Sheikh, M. A., Li, L., Pinkerton, A. J. & Safdar, S., 2010, In: Journal of Manufacturing Science and Engineering. 132, 1, 9 p., 011002.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  39. Published

    A CFD model of the laser, coaxial powder stream and substrate interaction in laser cladding

    Ibarra-Medina, J. & Pinkerton, A. J., 2010, In: Physics Procedia. 5, B, p. 337-346 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  40. Published

    Crystallographic texture and microstructure of pulsed diode laser-deposited Waspaloy

    Moat, R. J., Pinkerton, A. J., Li, L., Withers, P. J. & Preuss, M., 02/2009, In: Acta Metallurgica et Materialia. 57, 4, p. 1220-1229 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  41. Published

    Femtosecond laser micromachining of fibre Bragg gratings for simultaneous measurement of temperature and concentration of liquids

    Alemohammad, H., Toyserkani, E. & Pinkerton, A. J., 21/09/2008, In: Journal of Physics D: Applied Physics. 41, 18, p. - 9 p., 185101.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  42. Published

    Component repair using laser direct metal deposition

    Pinkerton, A. J., Wang, W. & Li, L., 07/2008, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 222, 7, p. 827-836 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  43. Published

    Laser surface colouring of titanium for contemporary jewellery

    O'Hana, S., Pinkerton, A. J., Shoba, K., Gale, A. W. & Li, L., 03/2008, In: Surface Engineering. 24, 2, p. 147-153 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  44. Published

    Theoretical analysis of the coincident wire-powder laser deposition process

    Pinkerton, A. J., Syed, W. U. H. & Li, L., 12/2007, In: Journal of Manufacturing Science and Engineering. 129, 6, p. 1019-1027 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  45. Published

    Single-step laser deposition of functionally graded coating by dual 'wire-powder' or 'powder-powder' feeding: a comparative study

    Syed, W. U. H., Pinkerton, A. J., Liu, Z. & Li, L., 31/07/2007, In: Applied Surface Science. 253, 19, p. 7926-7931 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  46. Published

    Coincident wire and powder deposition by laser to form compositionally graded material

    Syed, W. U. H., Pinkerton, A. J., Liu, Z. & Li, L., 21/05/2007, In: Surface and Coatings Technology. 201, 16-17, p. 7083-7091 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  47. Published

    An analytical model of beam attenuation and powder heating during coaxial laser direct metal deposition

    Pinkerton, A. J., 2007, In: Journal of Physics D: Applied Physics. 40, 23, p. 7323-7334 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  48. Published

    Effect of beam angle on HAZ, recast and oxide layer characteristics in laser drilling of TBC nickel superalloys

    Sezer, H. K., Li, L., Schmidt, M., Pinkerton, A. J., Anderson, B. & Williams, P., 12/2006, In: International Journal of Machine Tools and Manufacture. 46, 15, p. 1972-1982 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  49. Published

    Thermal and microstructural aspects of the laser direct metal deposition of waspaloy

    Pinkerton, A. J., Karadge, M., Syed, W. U. H. & Li, L., 08/2006, In: Journal of Laser Applications. 18, 3, p. 216-226 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  50. Published

    Combining wire and coaxial powder feeding in laser direct metal deposition for rapid prototyping

    Syed, W. U. H., Pinkerton, A. J. & Li, L., 30/04/2006, In: Applied Surface Science. 252, 13, p. 4803-4808 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  51. Published

    Simultaneous wire- and powder-feed direct metal deposition: An investigation of the process characteristics and comparison with single-feed methods

    Syed, W. U. H., Pinkerton, A. J. & Li, L., 02/2006, In: Journal of Laser Applications. 18, 1, p. 65-72 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  52. Published

    An experimental and theoretical investigation of combined gas- and water-atomized powder deposition with a diode laser

    Pinkerton, A. J., Syed, W. U. H. & Li, L., 2006, In: Journal of Laser Applications. 18, 1, p. 73-80 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  53. Published

    Rapid additive manufacturing of functionally graded structures using simultaneous wire and powder laser deposition

    Li, L., Syed, W. U. H. & Pinkerton, A. J., 2006, In: Virtual and Physical Prototyping. 1, 4, p. 217-225 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  54. Published

    Multiple-layer laser deposition of steel components using gas- and water-atomised powders: the differences and the mechanisms leading to them

    Pinkerton, A. J. & Li, L., 15/07/2005, In: Applied Surface Science. 247, 1-4, p. 175-181 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  55. Published

    Microstructure characterisation and process optimization of laser assisted rapid fabrication of 316L stainless steel

    Majumdar, J. D., Pinkerton, A. J., Liu, Z., Manna, I. & Li, L., 15/07/2005, In: Applied Surface Science. 247, 1-4, p. 320-327 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1 2 3 Next

Back to top