Home > Research > Researchers > Dr David Cheneler > Publications

Dr David Cheneler MEng (hons), PhD, CEng, MIMechE, PgCAP, FIMMM, SFHEA

Senior Lecturer

  1. Published

    Bio-hybrid tactile sensor for the study of the role of mechanoreceptors in human tactile perception

    Cheneler, D., Ward, M. & Anthony, C., 2011.

    Research output: Contribution to conference - Without ISBN/ISSN Poster

  2. Published

    Bio-hybrid tactile sensor and experimental set-up for investigating and mimicking the human sense of touch

    Cheneler, D., Buselli, E., Oddo, C., Kaklamani, G., Beccai, L., Carrozza, C. & Grover, L., 2012.

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  3. Published

    Light-modulating pressure sensor with integrated flexible organic light-emitting diode

    Cheneler, D., Vervaeke, M. & Thienpont, H., 1/05/2014, In: Applied Optics. 53, 13, p. 2766-2772 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  4. Published

    Mathematical modelling in chemical engineering

    Cheneler, D., 29/04/2014, In: Applied Rheology. 24, 4

    Research output: Contribution to Journal/MagazineBook/Film/Article reviewpeer-review

  5. Published

    OLED integrated silicon membranes for light-modulation devices

    Cheneler, D., Vervaeke, M., Thienpont, H., Lambertini, V. & Brignone, M., 19/05/2014, Optical Sensing and Detection III. Berghmans, F., Mignani, A. G. & De Moor, P. (eds.). SPIE, 11 p. (SPIE Proceedings ; vol. 9141).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  6. Published

    Power output and efficiency of beta-emitting microspheres

    Cheneler, D. & Ward, M. C. L., 01/2015, In: Radiation Physics and Chemistry. 106, p. 204-212 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  7. Published

    Transient bioimpedance monitoring of mechanotransduction in artificial tissue during indentation

    Cheneler, D., Bowen, J. & Kaklamani, G., 9/09/2014, In: Journal of Electrical Bioimpedance. 5, p. 55-74 20 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  8. Published

    A bio-hybrid tactile sensor incorporating living artificial skin and an impedance sensing array

    Cheneler, D., Buselli, E., Camboni, D., Anthony, C., Grover, L., Adams, M. J. & Oddo, C., 10/12/2014, In: Sensors. 14, 12, p. 23781-23802 22 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  9. Published

    Biomedical Applications of Polymeric Materials and Composites (Francis and Kumar)

    Cheneler, D., 16/05/2017, In: Applied Rheology. 27, 2, p. 9-10 2 p.

    Research output: Contribution to Journal/MagazineBook/Film/Article review

  10. Published

    Technology of Dispersed Systems and Materials: Physicochemical Dynamics of Structure Formation and Rheology (Uriev)

    Cheneler, D., 16/05/2017, In: Applied Rheology. 27, 2, p. 10-10 1 p.

    Research output: Contribution to Journal/MagazineBook/Film/Article review

  11. Published

    Active thermal sensor for improved distributed temperature sensing in haptic arrays

    Cheneler, D. & Ward, M., 2018, In: Journal of Sensors. 2018, p. 9631236 14 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  12. Published

    Underwater Cutting of Metals with Photons

    Cheneler, D., Pinkerton, A., Khan, A. & Nyamayaro, C., 3/07/2018.

    Research output: Contribution to conference - Without ISBN/ISSN Poster

  13. Published

    Measurement and modelling of the elastic defection of novel metal syntactic foam composite sandwich structures in 3-point bending

    Cheneler, D. & Kennedy, A. R., 1/03/2020, In: Composite Structures. 235, 6 p., 111817.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  14. Published

    A comparison of the manufacture and mechanical performance of porous aluminium and aluminium syntactic foams made by vacuum-assisted casting

    Cheneler, D. & Kennedy, A. R., 3/07/2020, In: Materials Science and Engineering A. 789, 9 p., 139527.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  15. Published

    Production of conductive composite electrodes for extracellular recording and stimulation

    Cheneler, D., Hardy, J. & Rennie, A., 19/08/2023.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  16. Published

    Experimental Platform to Facilitate Novel Back Brace Development for the Improvement of Spine Stability

    Cooper, L., Gullane, A., Harvey, J., Hills, A., Zemura, M., Martindale, J., Rennie, A. & Cheneler, D., 16/09/2019, In: Computer Methods in Biomechanics and Biomedical Engineering. 22, 15, p. 1163-1173 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  17. Unpublished

    Polyethylene Oxide Coatings Towards the Prevention of Biofilm Development

    Crisp, A., Short, R. D., Rehman, I. U., Cheneler, D. & Williams, C., 2022, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN Poster

  18. Published

    Short life fission products extracted from molten salt reactor fuel for radiopharmaceutical applications

    Degueldre, C., Findlay, J., Cheneler, D., Sardar, S. & Green, S., 31/03/2024, In: Applied Radiation and Isotopes. 205, 111146.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  19. Published

    Compact Back-End Electronics with Temperature Compensation and Efficient Data Management for In Situ SiPM-Based Radiation Detection

    Dixon, N., Monk, S., Graham, J. & Cheneler, D., 17/04/2023, In: Sensors. 23, 8, 20 p., 4053.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  20. Published

    Laminated Flow-Cell Detector with Granulated Scintillator for the Detection of Tritiated Water

    Dixon, N., Monk, S., Graham, J. & Cheneler, D., 3/11/2023, In: Radiation. 3, 4, p. 211-225 15 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  21. Published

    Additive manufacturing of multielectrode arrays for biotechnological applications

    Edwards, A., Hann, C., Ivill, H., Leeson, H., Tymczyszyn, L., Cummings, D., Ashton, M., Harper, G., Spencer, D., Low, W. L., Rajeev, K., Martin-Hirsch, P., Edwards, F., Hardy, J., Rennie, A. & Cheneler, D., 7/03/2021, In: Materials Advances. 2021, 2, p. 1600-1605 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  22. Published

    Towards 3D printed medical devices in vivo

    Fong, J., Baldock, S., Cheneler, D., Appleby, J. & Hardy, J., 7/07/2022.

    Research output: Contribution to conference - Without ISBN/ISSN Abstractpeer-review

  23. Published

    In Situ Mechanical Analysis of Sludge in Hazardous Environments

    Fried, T., Cheneler, D., Monk, S. D., Taylor, C. J. & Dodds, J., 2019.

    Research output: Contribution to conference - Without ISBN/ISSN Poster

  24. Published

    Compact viscometer prototype for remote in-situ analysis of sludge

    Fried, T., Cheneler, D., Monk, S. D., Taylor, C. J. & Dodds, J., 26/07/2019, In: Sensors. 19, 15, 14 p., 3299.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  25. Published

    Radiation testing of low cost, commercial off the shelf microcontroller board

    Fried, T., Di Buono, A., Cheneler, D., Cockbain, N., Dodds, J., Green, P. R., Lennox, B., Taylor, C. J. & Monk, S., 31/10/2021, In: Nuclear Engineering and Technology. 53, 10, p. 3335-3343 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

Back to top