Geoffrey Turvey - Publications & Outputs - Research Portal

Dr Geoffrey Turvey

Senior Lecturer

1 - 100 out of 118Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Author last name

Published
Lateral buckling of pultruded GRP I-section cantilevers
Brooks, R. J. & Turvey, G. J., 1995, In: Composite Structures. 32, 1-4, p. 203-215 13 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Effects of joint geometry and bolt torque on the structural performance of single bolt tension joints in pultruded GRP sheet material.
Cooper, C. & Turvey, G. J., 1995, In: Composite Structures. 32, 1-4, p. 217-226 10 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Nonlinear dynamic analysis of moving bilayer plates resting on elastic foundations
Esmaeilzadeh, M., Kadkhodayan, M., Mohammadi, S. & Turvey, G., 31/03/2020, In: Applied Mathematics and Mechanics. 41, p. 439-458 20 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of Shear on the Flexure of Pultruded GFRP Tubes
Holton, J. & Turvey, G., 3/09/2019, p. 55-61. 7 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
A new fictitious time for the dynamic relaxation (DXDR) method
Kadkhodayan, A., Alamatian, J. & Turvey, G. J., 7/05/2008, In: International Journal for Numerical Methods in Engineering. 74, 6, p. 996-1018 23 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A DXDR large deflection analysis of uniformly loaded square, circular and elliptical orthotropic plates using non-uniform rectangular finite-differences
Kadkhodayan, M., Alamatian, J., Turvey, G. & Erfani Moghadam, A., 10/2012, In: Journal of Mechanical Science and Technology. 26, 10, p. 3231-3242 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
On bending of rhombic plates.
Kobayashi, H., Ishikawa, K. & Turvey, G. J., 1994, Proceedings of the annual conference of Japanese society of civil engineers.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Elastic small deflection analysis of annular sector mindlin plates.
Kobayashi, H. & Turvey, G. J., 1994, In: International Journal of Mechanical Sciences. 36, 9, p. 811-827 17 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Physical test data for the appraisal of design procedures for bolted joints in pultruded FRP structural shapes and systems.
Mottram, J. T. & Turvey, G. J., 10/2003, In: Progress in Structural Engineering and Materials. 5, 4, p. 195-222 28 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Semi-rigid behaviour of civil engineering structural connection.
Mottram, J. T. & Turvey, G. J., 1998, COST C1: state-of-the-art review on design, testing, analysis and application of polymeric composite connections. Brussels/Luxembourg: European Commission, p. 99-99 1 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Maximising the buckling loads of symmetrically laminated composite rectangular plates using a layerwise optimisation (LO) approach.
Narita, Y. & Turvey, G. J., 2004, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 218, 7, p. 681-691 11 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Developing novel structural composites from recycled materials
Sotayo, A., Green, S. & Turvey, G., 16/12/2014.
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
Carpet recycling: a review of recycled carpets for structural composites
Sotayo, A., Green, S. & Turvey, G., 04/2015, In: Environmental Technology and Innovation. 3, p. 97-107 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Experimental investigation of recycled carpet composites for barrier structures
Sotayo, A., Green, S. M. & Turvey, G. J., 04/2016.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Benchmark testing and Finite Element (FE) analysis of timber fencing for replacement by novel composite materials
Sotayo, A., Green, S. M. & Turvey, G. J., 11/07/2016, Mechcomp2 2nd International Conference on Mechanics of Composites . Ferreira, A., Neves, A., Viola, E., Tornabene, F. & Fantuzzi, N. (eds.). Bologna: Editrice Esculapio
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Experimental and Finite Element (FE) modelling of timber fencing for benchmarking novel composite fencing
Sotayo, A., Green, S. M. & Turvey, G. J., 15/12/2016, In: Composite Structures. 158, p. 44-55 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Development, Characterisation and Finite Element Modelling of Novel Waste Carpet Composites for Structural Applications
Sotayo, A., Green, S. & Turvey, G., 10/05/2018, In: Journal of Cleaner Production. 183, p. 686-697 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Experimental investigation and Finite Element (FE) analysis of the load-deformation response of PVC fencing structures
Sotayo, A., Green, S. M. & Turvey, G. J., 1/06/2019, In: structures. 19, p. 424-435 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An experimental evaluation of the stiffening effect of CFRP flange reinforcement and practical end connections on the flexural response of pultruded GRP WF-beams.
Turvey, G. J., 2004, Proceedings of the IMTCR-04 conference on innovative materials and technologies for construction and restoration: volume 1: keynotes, materials, construction. p. 578-588 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Review of tests on bolted joints between pultruded GRP profiles.
Turvey, G. J. & Cooper, C., 2004, In: Proceedings of the Institute of Civil Engineers Civil Engineering. 157, 3, p. 211-233 23 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Vibration frequencies and mode shapes of pultruded GRP circular plates with central circular cut-outs.
Turvey, G. J. & Mulcahy, N., 2004, Proceedings of the 4th international conference on thin-walled structures: thin-walled structures: advances in research, design and manufacturing technology. p. 927-934 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Recent research advances at Lancaster University on double-lap bolted tension joints in pultruded GRP plate material.
Turvey, G. J. & Wang, P., 2004, Proceedings of the 7th world pultrusion conference. 7 ed. p. 1-16 16 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Characterisation of the rotational stiffness and strength of web-flange junctions of pultruded GRP WF-sections via web bending tests.
Turvey, G. J. & Zhang, Y., 2004, Proceedings of the international conference on composites testing and model identification (CompTest 2004). p. 6-7 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Finite element analysis of buckling and initial failure loads of short pultruded GRP columns.
Turvey, G. J. & Zhang, Y., 2004, Proceedings of the 7th international conference on computational structures technology. p. 57-58 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Local buckling of axially compressed, pultruded GRP WF-section short columns – comparison of experimental response with FE analysis predictions.
Turvey, G. J. & Zhang, Y., 2004, Proceedings of the BSSM (British society for strain measurement) international conference on advances in experimental mechanics: advances in experimental mechanics. p. 87-92 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Shear failure strength of web-flange junctions in pultruded GRP profiles.
Turvey, G. J. & Zhang, Y., 2004, Proceedings of the ASIC 2004 conference: advanced polymer composites (ASIC 2004). p. 553-560 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Torsion of a pultruded GRP WF beam with practical end connections: experimental results and FE analysis.
Turvey, G. J. & Zhang, Y., 2004, Advanced composite Materials in bridges and structures. p. 99
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Web-flange junctions of pultruded GRP WF profiles: notched flange shear strengths.
Turvey, G. J. & Zhang, Y., 2004, Proceedings of a conference: FRP composites in civil engineering (CICE 2004). p. 859-864 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Annular sector plates: comparison of full-section and layer yield predictions.
Turvey, G. J. & Salehi, M., 2003, Proceedings of the 9th international conference on civil and structural engineering computing. p. 89-90 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Tearing failure of web-flange junctions in pultruded GRP profiles.
Turvey, G. J. & Zhang, Y., 2003, Proceedings of the DFC-7 conference on deformation and fracture of composites.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Evaluation of the structural performance of box beams fabricated from a novel system of pultruded profiles.
Turvey, G. J., 2001, In: Composites in constructions. p. 803-808 6 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
"Pultruded GRP frames: simple (conservative) approach to design, a rational alternative and research needs for improved design".
Turvey, G. J., 2001, Proceedings of the ASCE sponsored workshop on composites in construction: a reality.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Elasto-plastic large deflection of uniformly loaded sector plates.
Turvey, G. J. & Salehi, M., 2001, Proceedings of the 3rd international conference on thin-walled structures. p. 631-640 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Effects of temperature on the structural integrity of bolted joints in pultrusions.
Turvey, G. J. & Wang, P., 2001, In: Composites in constructions. p. 171-176 6 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Single bolt tension joints in pultruded GRP material – effect of elevated temperature on failure loads and strengths and joint efficiency.
Turvey, G. J. & Wang, P., 2001, Proceedings of the BSSM conference on strain measurement in the 21st century. p. 20-23 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Bolted connections in PFRP structures.
Turvey, G. J., 2000, In: Progress in Structural Engineering and Materials. 2, 2, p. 146-156 11 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Flexure of pultruded GRP beams with semi-rigid end connections.
Turvey, G. J., 12/1999, In: Composite Structures. 47, 1, p. 571-580 10 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Moment – rotation tests on bolted end connections in pultruded GRP beams – tests with stainless steel cleata and an assessment of their performance relative to GRP cleats.
Turvey, G. J., 2000, Proceedings in the ECCM9 (composites – from fundamentals to exploitation). Brighton
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Semi-rigid column base connections in pultruded GRP frame structures.
Turvey, G. J. & Cooper, C., 2000, In: Computers and Structures. 76, 1-3, p. 77-88 12 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Experimental and computed natural frequencies of square pultruded GRP plates: effects of anisotropy, hole size ratio and edge support conditions.
Turvey, G. J., Mulcahy, N. & Widden, M. B., 12/2000, In: Composite Structures. 50, 4, p. 391-403 13 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Uniform and patch loaded steel plates: comparisons between analysis and experiment.
Turvey, G. J. & Osman, M. Y., 2000, Computational steel structures technology. Ivanyi, M., Muzeau, J. P. & Topping, B. H. V. (eds.). Edinburgh: Civil-Comp press, p. 49-59 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Uniform and patch loaded steel plates – comparisons between analysis and experiment.
Turvey, G. J. & Osman, M. Y., 2000, Proceedings of the 5th international conference on computational structures technology. Leuven
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Fibre Reinforced Polymer Composite Structural Pultrusions and Their End Connections.
Turvey, G. J., 1999, Composites and Plastics in Construction: BRE, Watford, UK, 16th-18th November 1999. RAPRA, p. 1-8 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Semi-rigid bolted connections in pultruded GRP beams and simple frames: part 1
Turvey, G. J., 1999, Proceedings of the COST C1 conference: COST C1: control of the semi-rigid behaviour of civil engineering structural connections. Liege, p. 547-556 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Elasto-plastic response of uniformly loaded sector plates: full-section yield model predictions and spread of plasticity.
Turvey, G. J. & Salehi, M., 11/2001, In: Computers and Structures. 79, 26-28, p. 2335-2348 14 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Frame connections.
Turvey, G. J., 1998, COST C1: state-of-the-art review on design, testing, analysis and applications of polymeric composite connections - Semi-rigid behaviour of civil engineering structural connections. Mottram, J. T. & Turvey, G. J. (eds.). Brussels/Luxembourg: European Commission, p. 27-49 23 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Plate-to-plate mechanical: part II: testing and applications.
Turvey, G. J., 1998, COST C1: state-of-the-art review on design, testing, analysis and applications of polymeric composite connections - Semi-rigid behaviour of civil engineering structural connections. Mottram, J. T. & Turvey, G. J. (eds.). Brussels/Luxembourg: European Commission, p. 15-26 12 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Recent developments in testing, design analysis and modelling of bolted connections in pultruded GRP frames made of open-section profiles.
Turvey, G. J., 1998, Proceedings of the 4th EPTA world pultrusion conference. European Pultrusion Technology Association, p. 14
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Single-bolt tension joint tests on pultruded GRP plate: effects of the orientation of the tension direction relative to pultrusion direction.
Turvey, G. J., 1998, In: Composite Structures. 42, 4, p. 341-351 11 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Torsion tests on pultruded GRP sheet.
Turvey, G. J., 1998, In: Composites Science and Technology. 58, 8, p. 1343-1351 9 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Semi-rigid connection in pultruded GRP frame structures.
Turvey, G. J. & Cooper, C., 1998, Mechanics of composite materials and structures. Mota Soares, C. A. ., Mota Soares, A. M. & Freitas, M. J. M. (eds.). p. 151-166 16 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Semi-rigid connections and their effects on the sway response of pultruded GRP columns in low-rise construction.
Turvey, G. J. & Cooper, C., 1998, Proceedings of the 2nd international conference on composites in infrastructure (ICCI ’98). University of Arizona, p. 221-235 15 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Uplift tests on column base connections in pultruded GRP frames.
Turvey, G. J. & Cooper, C., 1998, In: Proceedings of the eighth international conference on composite materials (ECCM-8). p. 285-292 8 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Elastic large deflection analysis of stiffened annular sector plates.
Turvey, G. J. & Salehi, M., 1998, In: International Journal of Mechanical Sciences. 40, 1, p. 51-70 20 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Effect of load position on the lateral buckling of pultruded GRP cantilevers - correlations between experiment and theory.
Turvey, G. J., 05/1996, In: Composite Structures. 35, 1, p. 33-47 15 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Lateral buckling tests on rectangular cross-section pultruded GRP cantilever beams.
Turvey, G. J., 1996, In: Composites Part B: Engineering. 27, 1, p. 35-42 8 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Testing of a pultruded GRP pinned base rectangular portal frame for the EUROCOMP project
Turvey, G. J., 1996, Structural design of polymer composites: EUROCOMP design code and handbook. Clarke, J. L. (ed.). London: E. and FN Spon, p. 719-741 23 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Lateral buckling tests on pultruded GRP I-section beams with simply supported - simply supported and clamped - simply supported end conditions.
Turvey, G. J. & Brooks, R. J., 1996, Proceedings of the 1st international conference on composites in infrastructure (ICCI '96). University of Arizona, p. 651-664 14 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Characterisation of the short term static moment - rotation response of bolted connections between pultruded GRP beam and column WF-sections.
Turvey, G. J. & Cooper, C., 1996, Proceedings of the 2nd international conference on advanced composite materials in bridges and structures (ACMBS II). Montreal: Canadian Society for Civil Engineering, p. 927-934 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Semi-rigid pultruded GRP frame connections: tests to determine static moment-rotation characteristics.
Turvey, G. J. & Cooper, C., 1996, ECCM-7 Seventh European Conference on Composite Materials : realising their commercial potential. Bader, M. (ed.). Cambridge: Woodhead Publishing Limited, p. 295-300 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Full-range response of circular steel plates subjected to combined transverse pressure and edge compression.
Turvey, G. J. & Drinali, H., 1996, Advances in computational techniques for structural engineering. Topping, B. H. V. (ed.). Edinburgh: Civil-Comp press, 313 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Elastic and initial flexural failure analysis of unsymmetrically laminated cross-ply strips.
Turvey, G. J. & Osman, M. Y., 1996, In: Composites Part B: Engineering. 27, 5, p. 505-518 14 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Analysis of pultruded glass reinforced plastic beams with semi-rigid end connections.
Turvey, G. J., 1997, In: Composite Structures. 38, 1, p. 3-16 14 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Non-linear first yield analysis of circular plates subjected to combined uniform pressure and edge compression.
Turvey, G. J. & Drinali, H., 1997, In: Computers and Structures. 63, 4, p. 769-773 5 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Circular plates with one diametral stiffener: an elastic large deflection analysis.
Turvey, G. J. & Salehi, M., 1997, In: Computers and Structures. 63, 4, p. 775-783 9 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Full-section yield analysis of uniformly loaded sector plates.
Turvey, G. J. & Salehi, M., 1997, Trends in structural mechanics: theory, practice and education. Roorda, J. & Srivastava, N. K. (eds.). v. 54 ed. Dordrecht; London: Kluwer Academic, p. 289-298 10 p. (Solid mechanics and its applications).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Testing of a pultruded GRP pinned base rectangular portal frame for the EUROCOMP project
Turvey, G. J., 1995, EUROCOMP design guide and background projects. Clarke, J. L. (ed.). London: Chapman and Hall
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Single bolt tension joint tests on pultruded GRP WF-section web and flange material.
Turvey, G. J. & Cooper, C., 1995, Proceedings of the 10th international conference on composite materials (ICCM-10). Poursartip, A. & Street, K. (eds.). Vancouver: Woodhead Publishing Ltd., p. 621-628 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Large deflection analysis of eccentrically stiffened sector plates.
Turvey, G. J. & Salehi, M., 1995, Proceedings of a conference on developments in computational techniques for civil engineering (CIVIL-COMP 95). Topping, B. H. V. (ed.). Edinburgh: Civil-Comp press, p. 243-253 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Tension/compression strength of unnotched/notched pultruded GRP plate.
Turvey, G. J., 1992, Proceedings of the ECCM-composites testing and standardisation conference.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Tests on pultruded GRP posts for handrail/barrier structures.
Turvey, G. J. & Slater, R. C., 1992, First international conference on advanced composite materials in bridges and structures. Canada
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Open-hole tension strength of pultruded GRP plate.
Turvey, G. & Wang, P., 1/02/2003, In: Proceedings of the ICE - Structures and Buildings. 156, 1, p. 93-101 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Structural analysis of CFRP-plated pultruded GRP beams.
Turvey, G., 1/04/2006, In: Proceedings of the ICE - Structures and Buildings. 159, SB2, p. 65-75 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Tearing failure of web-flange junctions in pultruded GRP profiles.
Turvey, G. J. & Zhang, Y., 1/02/2005, In: Composites Part A: Applied Science and Manufacturing. 36, 2, p. 309-317 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Failure of pultruded GRP single-bolt tension joints under hot-wet conditions.
Turvey, G. & Wang, P., 1/02/2007, In: Composite Structures. 77, 4, p. 514-520 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Failure of pultruded GRP WF-section webs in compression - an experimental investigation.
Turvey, G., 2006, Proceedings of the 12th European conference on composite materials (ECCM-12).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
An FE analysis of the stresses in pultruded GRP single-bolt tension joints and their implications for joint design.
Turvey, G. & Wang, P., 2006, Proceedings of the 6th international conference on computational mechanics (ECCM 2006).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Single-bolt tension joints in pultruded GRP plate - effects of elevated temperature on failure loads, failure modes, load orientation and joint efficiency.
Turvey, G. & Wang, P., 2006, Proceedings of the 2nd international conference on joining plastics 2006..
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Characterisation of the rotational stiffness and strength of web-flange junctions of pultruded GRP WF-sections via web bending tests.
Turvey, G. & Zhang, Y., 02/2006, In: Composites Part A: Applied Science and Manufacturing. 37, 2, p. 152-164 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A computational and experimental analysis of the buckling, postbuckling and initial failure of pultruded GRP columns.
Turvey, G. & Zhang, Y., 09/2006, In: Computers and Structures. 84, 22-23, p. 1527-1537 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Cross-stiffened circular plates: an elasto-plastic large deflection analysis
Turvey, G., 14/09/2010.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Effects of bonded splice joints on the flexural response of pultruded fibre reinforced polymer beams
Turvey, G., 7/09/2010. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
An experimental investigation of bolt pull-through in pultruded GRP plate
Turvey, G., 1/09/2009, p. 462-472. 11 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Experimental evaluation of bolt pull-through in pultruded glass-fibre-reinforced polymer plate
Turvey, G. J., 10/2011, In: Proceedings of the ICE - Structures and Buildings. 164, 5, p. 307-319 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Failure of pultruded GRP angle leg junctions in tension
Turvey, G. & Wang, P., 27/07/2009. 11 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Environmental effects on the failure of GRP multi-bolt joints
Turvey, G. J. & Wang, P., 08/2009, In: Proceedings of the ICE - Structures and Buildings. 162, 4, p. 275-287 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Elasto-plastic large deflection response of pressure loaded circular plates stiffened by a single diametral stiffener
Turvey, G. J. & Salehi, M., 2008, In: Thin-Walled Structures. 46, 7-9, p. 991-1002 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Buckling of CFRP stiffened GRP flanges
Amal Afifi, 22/07/2008. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Bending of tip-loaded CFRP stiffened pultruded GRP cantilevers: comparison between theory and experiment
Turvey, G., 2/06/2008. 10 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Effect of hole clearance on bolt loads in pultruded GRP tension joints
Turvey, G. & Wang, P., 8/07/2007. 7 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Elasto-plastic large deflection response of pressure loaded circular plates stiffened by a single diametral stiffener
Turvey, G. & Salehi, M., 26/06/2007. 27 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Opening mode failure of pultruded GRP angle leg junctions
Turvey, G. & Zhang, Y., 30/04/2007, p. 389-393. 5 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Pultruded GFRP continuus beams - comparison of flexural test data with analysis predictions
Turvey, G., 6/09/2011, p. 470-481.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Failure of single-lap single-bolt tension joints in pultruded glass fibre reinforced plate
Turvey, G., 13/06/2012. 8 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
An experimental investigation of the tensile behaviour of single-lap bolted joints in pultruded GFRP plate
Turvey, G. & Gode, J., 13/09/2012. 15 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Flexure of pultruded glass-fibre-reinforced polymer beams with bonded splice joints
Turvey, G. J., 10/2011, In: Proceedings of the ICE - Structures and Buildings. 164, 5, p. 333-344 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Bolted joints in pultruded glass fibre reinforced polymer (GFRP) composites
Turvey, G., 2011, Composite joints and connections: principles, modelling and testing. Camanho, P. & Tong, L. (eds.). Cambridge: Woodhead Publishing Limited, p. 77-111 35 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Enhancing the load capacity of pultruded GFRP beams via discrete load redistribution
Turvey, G., 04/2015, In: Composite Structures. 122, p. 352-360 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Flexural behavior of pultruded glass fibre reinforced polymer composite beams with bolted splice joints
Turvey, G. & Cerutti, X., 01/2015, In: Composite Structures. 119, 1, p. 543-550 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Experimental and analytical investigation of two- and six-plate bonded splice joints on serviceability limit deformations of pultruded GFRP beams
Turvey, G., 05/2014, In: Composite Structures. 111, p. 426-435 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1 2 Next

Research

Dr Geoffrey Turvey

Quick Links

Connect With Us