Home > Research > Researchers > Professor Pedro Rivera Diaz Del Castillo > Publications

Research

Professor Pedro Rivera Diaz Del Castillo

Formerly at Lancaster University

101 - 163 out of 163Page size: 100
RSS feed of this list
  1. Published

    Genetic alloy design of ultra high strength stainless steels: From thermodynamics to quantum mechanics

    Rivera-Díaz-del-Castillo, P. E. J., Xu, W. & Van Der Zwaag, S., 2010, THERMEC 2009. 5 ed. Vol. 638-642. p. 3473-3478 6 p. (Materials Science Forum; vol. 638-642).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  2. Published

    Growth of needle and plate shaped particles: Theory for small supersaturations, maximum velocity hypothesis

    Rivera-Díaz-del-Castillo, P. E. J. & Bhadeshia, H. K. D. H., 2001, In: Materials Science and Technology. 17, 1, p. 25-29 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  3. Published

    Theory for growth of spherical precipitates with capillarity effects

    Rivera-Díaz-del-Castillo, P. E. J. & Bhadeshia, H. K. D. H., 2001, In: Materials Science and Technology. 17, 1, p. 30-32 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  4. Published

    Understanding microstructural transitions occurring under rolling contact fatigue

    Rivera-Díaz-Del-Castillo, P. E. J., 2015, Bearing Steel Technologies: 10th Volume, Advances in Steel Technologies for Rolling Bearings. ASTM International, Vol. STP 1580. p. 550-563 14 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  5. Published

    Computational design of nanostructured steels employing irreversible thermodynamics

    Rivera-Díaz-Del-Castillo, P. E. J., Hayashi, K. & Galindo-Nava, E. I., 10/2013, In: Materials Science and Technology (United Kingdom). 29, 10, p. 1206-1211 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  6. Published

    Dislocation annihilation in plastic deformation: I. Multiscale irreversible thermodynamics

    Rivera-Díaz-Del-Castillo, P. E. J. & Huang, M., 04/2012, In: Acta Materialia. 60, 6-7, p. 2606-2614 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  7. Published

    Precipitate coarsening in multicomponent systems

    Rivera-Díaz-Del-Castillo, P. E. J., 07/2002, In: Scripta Materialia. 47, 2, p. 113-117 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  8. Published

    Theory for growth of needle-shaped particles in multicomponent systems

    Rivera-Díaz-Del-Castillo, P. E. J. & Bhadeshia, H. K. D. H., 2002, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 33, 4, p. 1075-1081 7 p., 209.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  9. Published

    Assuring microstructural homegeniety in dual phase and trip steels

    Rivera-Díaz-Del-Castillo, P. E. J. & Van Der Zwaag, S., 11/2004, In: Steel Research International. 75, 11, p. 711-715 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  10. Published

    Assurring microstructural homogeniety in dual phase and trip steels

    Rivera-Díaz-Del-Castillo, P. E. J. & Van Der Zwaag, S., 2004, Multiscaling in Applied Science and Emerging Technology; Fundamentals and Applications in Mesomechanics: Proceedings of the Sixth International Conference for Mesomechanics. Sih, G. C., Kermanidis, T. B. & Pantelakis, S. G. (eds.). p. 261-265 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  11. Published

    A model for ferrite/pearlite band formation and prevention in steels

    Rivera-Díaz-Del-Castillo, P. E. J., Sietsma, J. & Van Der Zwaag, S., 02/2004, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 35 A, 2, p. 425-433 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  12. Published

    Theory for diffusional transformation kinetics: Multicomponent and multiphase systems

    Rivera-Díaz-Del-Castillo, P. E. J., Reischig, P., Xu, W. & Van Der Zwaag, S., 11/2005, In: Scripta Materialia. 53, 9, p. 1089-1094 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  13. Published

    Strengthening mechanisms in high-entropy alloys: Perspectives for alloy design

    Rivera-Díaz-Del-Castillo, P. E. J. & Fu, H., 14/10/2018, In: Journal of Materials Research. 33, 19, p. 2970-2982 13 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  14. Published

    Defect prevention in selective laser melting components: Compositional and process effects

    Sabzi, H. E. & Rivera-Díaz-del-Castillo, P. E. J., 18/11/2019, In: Materials. 12, 22, 15 p., 3791.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  15. Published

    Controlling crack formation and porosity in laser powder bed fusion: Alloy design and process optimisation

    Sabzi, H. E., Maeng, S., Liang, X., Simonelli, M., Aboulkhair, N. T. & Rivera-Díaz-del-Castillo, P. E. J., 1/08/2020, In: Additive Manufacturing. 34, 14 p., 101360.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  16. Published

    Grain refinement in laser powder bed fusion: The influence of dynamic recrystallization and recovery

    Sabzi, H. E., Aboulkhair, N. T., Liang, X., Li, X. H., Simonelli, M., Fu, H. & Rivera-Díaz-del-Castillo, P. E. J., 30/11/2020, In: Materials and Design. 196, 10 p., 109181.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  17. Published

    Deformation twinning-induced dynamic recrystallization during laser powder bed fusion

    Sabzi, H. E., Li, X.-H., Zhang, C., Fu, H., San-Martín, D. & Rivera-Díaz-del-Castillo, P. E. J., 15/01/2022, In: Scripta Materialia. 207, 114307.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  18. Published

    Strengthening control in laser powder bed fusion of austenitic stainless steels via grain boundary engineering

    Sabzi, H. E., Hernandez-Nava, E., Li, X.-H., Fu, H., San-Martín, D. & Rivera-Díaz-del-Castillo, P. E. J., 15/12/2021, In: Materials and Design. 212, 17 p., 110246.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  19. Published

    A new etching route for revealing the austenite grain boundaries in an 11.4% Cr precipitation hardening semi-austenitic stainless steel

    San Martin, D., Rivera Diaz del Castillo, P. E. J., Peekstok, E. & van der Zwaag, S., 05/2007, In: Materials Characterization. 58, 5, p. 455-460 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  20. Published

    On the production and properties of novel particulate NiTip/AA2124 metal matrix composites

    San Martín, D., Risanti, D. D., Garcés, G., Rivera-Diaz-del-Castillo, P. E. J. & van der Zwaag, S., 25/11/2009, In: Materials Science and Engineering: A. 526, 1-2, p. 250-252 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  21. Published

    Isothermal martensitic transformation in a 12Cr-9Ni-4Mo-2Cu stainless steel in applied magnetic fields

    San Martín, D., Aarts, K. W. P., Rivera-Díaz-del-Castillo, P. E. J., van Dijk, N. H., Brück, E. & van der Zwaag, S., 05/2008, In: Journal of Magnetism and Magnetic Materials. 320, 10, p. 1722-1728 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  22. Published

    In situ study of austenite formation by dilatometry in a low carbon microalloyed steel

    San Martín, D., Rivera-Díaz-del-Castillo, P. E. J. & García-de-Andrés, C., 05/2008, In: Scripta Materialia. 58, 10, p. 926-929 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  23. Published

    Discovery of marageing steels: machine learning vs. physical metallurgical modelling

    Shen, C., Wang, C., Rivera-Díaz-del-Castillo, P. E. J., Xu, D., Zhang, Q., Zhang, C. & Xu, W., 10/10/2021, In: Journal of Materials Science and Technology. 87, 10, p. 258-268 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  24. Published

    Modelling hydrogen migration and trapping in steels

    Stopher, M. A., Lang, P., Kozeschnik, E. & Rivera-Diaz-del-Castillo, P. E. J., 15/09/2016, In: Materials and Design. 106, p. 205-215 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  25. Published

    Unveiling the nature of hydrogen embrittlement in bearing steels employing a new technique

    Szost, B. A. & Rivera-Díaz-Del-Castillo, P. E. J., 04/2013, In: Scripta Materialia. 68, 7, p. 467-470 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  26. Published

    Hydrogen-trapping mechanisms in nanostructured steels

    Szost, B. A., Vegter, R. H. & Rivera-Díaz-Del-Castillo, P. E. J., 10/2013, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 44, 10, p. 4542-4550 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  27. Published

    Developing bearing steels combining hydrogen resistance and improved hardness

    Szost, B. A., Vegter, R. H. & Rivera-Díaz-del-Castillo, P. E. J., 2013, In: Materials and Design. 43, p. 499-506 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  28. Published

    Designing high entropy alloys employing thermodynamics and Gaussian process statistical analysis

    Tancret, F., Toda-Caraballo, I., Menou, E. & Rivera Díaz-Del-Castillo, P. E. J., 5/02/2017, In: Materials and Design. 115, p. 486-497 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  29. Published

    Dynamic recrystallisation model in precipitation-hardened superalloys as a tool for the joint design of alloys and forming processes

    Tancret, F., Galindo-Nava, E. & Rivera Díaz-del-Castillo, P. E. J., 5/08/2016, In: Materials and Design. 103, p. 293-299 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  30. Published

    On the transformation behaviour of NiTi particulate reinforced AA2124 composites

    Thorat, R. R., Risanti, D. D., San Martín, D., Garces, G., Rivera Díaz del Castillo, P. E. J. & van der Zwaag, S., 27/05/2009, In: Journal of Alloys and Compounds. 477, 1-2, p. 307-315 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  31. Published

    Micromechanical predictions of TRIP steel behavior as a function of microstructural parameters

    Tjahjanto, D. D., Suiker, A. S. J., Turteltaub, S., Rivera Diaz del Castillo, P. E. J. & van der Zwaag, S., 11/2007, In: Computational Materials Science. 41, 1, p. 107-116 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  32. Published

    Simulation and Modeling in High Entropy Alloys

    Toda-Caraballo, I., Wróbel, J. S., Nguyen-Manh, D., Pérez, P. & Rivera-Díaz-del-Castillo, P. E. J., 1/11/2017, In: JOM. 69, 11, p. 2137-2149 13 p.

    Research output: Contribution to Journal/Magazine › Review article › peer-review

  33. Published

    A criterion for the formation of high entropy alloys based on lattice distortion

    Toda-Caraballo, I. & Rivera-Díaz-Del-Castillo, P. E. J., 1/04/2016, In: Intermetallics. 71, p. 76-87 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  34. Published

    Modelling solid solution hardening in high entropy alloys

    Toda-Caraballo, I. & Rivera-Díaz-Del-Castillo, P. E. J., 15/02/2015, In: Acta Materialia. 85, p. 14-23 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  35. Published

    Modelling and Design of Magnesium and High Entropy Alloys Through Combining Statistical and Physical Models

    Toda-Caraballo, I. & Rivera-Díaz-del-Castillo, P. E. J., 2015, In: JOM. 67, 1, p. 108-117 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  36. Published

    Solid solution formation rules and crystal structure indicators on high entropy alloys

    Toda-Caraballo, I. & Rivera-Diaz-Del-Castillo, P. E. J., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 793-794 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  37. Published

    Interatomic spacing distribution in multicomponent alloys

    Toda-Caraballo, I., Wróbel, J. S., Dudarev, S. L., Nguyen-Manh, D. & Rivera-Díaz-Del-Castillo, P. E. J., 14/07/2015, In: Acta Materialia. 97, p. 156-169 14 p., 12259.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  38. Published

    Discovery of new materials and heat treatments: Accelerated Metallurgy and the case of ferrous and magnesium alloys

    Toda-Caraballo, I., Galindo-Nava, E. I. & Rivera-Díaz-del-Castillo, P. E. J., 2014, THERMEC 2013. TRANS TECH PUBLICATIONS LTD, BRANDRAIN 6, CH-8707 ZURICH-UETIKON, SWITZERLAND, Vol. 783-786. p. 2188-2193 6 p. (Materials Science Forum; vol. 783-786).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  39. Published

    Understanding the factors influencing yield strength on Mg alloys

    Toda-Caraballo, I., Galindo-Nava, E. I. & Rivera-Díaz-Del-Castillo, P. E. J., 15/08/2014, In: Acta Materialia. 75, p. 287-296 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  40. Published

    Unravelling the materials genome: Symmetry relationships in alloy properties

    Toda-Caraballo, I., Galindo-Nava, E. I. & Rivera-Díaz-Del-Castillo, P. E. J., 25/06/2013, In: Journal of Alloys and Compounds. 566, p. 217-228 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  41. Published

    Symmetry in material property relationships: A tool for the discovery of new alloys

    Toda-Caraballo, I., Galindo, E. I. N. & Rivera-Díaz, P. E. J. D. C., 1/01/2013, TMS 2013 142nd Annual Meeting and Exhibition, Annual Meeting. Wiley-Blackwell, p. 311-318 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  42. Published

    Correlation between vanadium carbide size and hydrogen trapping in ferritic steel

    Turk, A., San Martín, D., Rivera-Díaz-del-Castillo, P. E. J. & Galindo-Nava, E. I., 15/07/2018, In: Scripta Materialia. 152, p. 112-116 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  43. Published

    Grain boundary carbides as hydrogen diffusion barrier in a Fe-Ni alloy: A thermal desorption and modelling study

    Turk, A., Bombač, D., Jelita Rydel, J., Ziętara, M., Rivera-Díaz-del-Castillo, P. E. J. & Galindo-Nava, E. I., 15/12/2018, In: Materials and Design. 160, p. 985-998 14 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  44. Published

    Quantification of hydrogen trapping in multiphase steels: Part I – Point traps in martensite

    Turk, A., Joshi, G. R., Gintalas, M., Callisti, M., Rivera-Díaz-del-Castillo, P. E. J. & Galindo-Nava, E. I., 1/08/2020, In: Acta Materialia. 194, p. 118-133 16 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  45. Published

    Quantification of hydrogen trapping in multiphase steels: Part II – Effect of austenite morphology

    Turk, A., Pu, S. D., Bombač, D., Rivera-Díaz-del-Castillo, P. E. J. & Galindo-Nava, E. I., 15/09/2020, In: Acta Materialia. 197, p. 253-268 16 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  46. Published

    Modelling of micro-segregation in a 1C-1.5Cr type bearing steel

    Walker, P. F. F., Kerrigan, A., Green, M., Cardinal, N., Connell, J. & Rivera-Díaz-Del-Castillo, P. E. J., 2015, Bearing Steel Technologies: 10th Volume, Advances in Steel Technologies for Rolling Bearings. ASTM International, Vol. STP 1580. p. 54-80 27 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  47. Published

    A new ultrahigh-strength stainless steel strengthened by various coexisting nanoprecipitates

    Xu, W., Rivera-Díaz-Del-Castillo, P. E. J., Yan, W., Yang, K., San Martín, D., Kestens, L. A. I. & Van Der Zwaag, S., 06/2010, In: Acta Materialia. 58, 11, p. 4067-4075 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  48. Published

    Genetic design and characterization of novel ultra-high-strength stainless steels strengthened by Ni3Ti intermetallic nanoprecipitates

    Xu, W., Rivera-Díaz-del-Castillo, P. E. J., Wang, W., Yang, K., Bliznuk, V., Kestens, L. A. I. & van der Zwaag, S., 06/2010, In: Acta Materialia. 58, 10, p. 3582-3593 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  49. Published

    Computational design of UHS maraging stainless steels incorporating composition as well as austenitisation and ageing temperatures as optimisation parameters

    Xu, W., Rivera-Diaz-Del-Castillo, P. E. J. & Van Der Zwaag, S., 07/2009, In: Philosophical Magazine. 89, 20, p. 1647-1661 15 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  50. Published

    The composition and temperature effects on the ultra high strength stainless steel design

    Xu, W., Castillo, P. E. J. R. D. D. & Zwaag, S. V. D., 20/03/2009, In: International Journal of Modern Physics B. 23, 6-7, p. 1060-1065 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  51. Published

    A combined optimization of alloy composition and aging temperature in designing new UHS precipitation hardenable stainless steels

    Xu, W., Castillo, P. E. J. R. D. D. & Zwaag, S. V. D., 04/2009, In: Computational Materials Science. 45, 2, p. 467-473 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  52. Published

    Modelling Chi-phase precipitation in high molybdenum stainless steels

    Xu, W., San Martin, D., Rivera Diaz Del Castillo, P. E. J. & Van Der Zwaag, S., 2007, In: Advanced Materials Research. 15-17, p. 531-536 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  53. Published

    Modelling and characterization of chi-phase grain boundary precipitation during aging of Fe-Cr-Ni-Mo stainless steel

    Xu, W., San Martin, D., Rivera Díaz del Castillo, P. E. J. & van der Zwaag, S., 15/10/2007, In: Materials Science and Engineering: A. 467, 1-2, p. 24-32 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  54. Published

    Ferrite/pearlite band prevention in dual phase and TRIP steels: Model development

    Xu, W., Rivera-Díaz-Del-Castillo, P. E. J. & Van Der Zwaag, S., 2005, In: ISIJ International. 45, 3, p. 380-387 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  55. Published

    Designing nanoprecipitation strengthened UHS stainless steels combining genetic algorithms and thermodynamics

    Xu, W., Rivera-Díaz-del-Castillo, P. E. J. & van der Zwaag, S., 12/2008, In: Computational Materials Science. 44, 2, p. 678-689 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  56. Published

    Genetic alloy design based on thermodynamics and kinetics

    Xu, W., Rivera-Diaz-Del-Castillo, P. E. J. & Van Der Zwaag, S., 04/2008, In: Philosophical Magazine. 88, 12, p. 1825-1833 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  57. Published

    Computational design of UHS stainless steel strengthened by multi-species nanoprecipitates combining genetic algorithms and thermokinetics

    Xu, W., Del Castillo, P. E. J. R. D. & Van Der Zwaag, S., 1/12/2008, p. 1167-1181. 15 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  58. Published

    High Entropy Alloy Strengthening Modelling

    Zang, C. & Rivera, P., 30/09/2022, In: Modelling and Simulation in Materials Science and Engineering. 30, 6, 32 p., 063001.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  59. Published

    Modelling strengthening mechanisms in beta-type Ti alloys

    Zhao, G.-H., Liang, X. Z., Kim, B. & Rivera-Díaz-del-Castillo, P. E. J., 22/05/2019, In: Materials Science and Engineering: A. 756, p. 156-160 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  60. Published

    Microstructural evolution and strain-hardening in TWIP Ti alloys

    Zhao, G.-H., Xu, X., Dye, D. & Rivera-Díaz-del-Castillo, P. E. J., 15/01/2020, In: Acta Materialia. 183, p. 155-164 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  61. Published

    Alloy design by tailoring phase stability in commercial Ti alloys

    Zhao, G.-H., Liang, X. Z., Xu, X., Gamża, M. B., Mao, H., Louzguine-Luzgin, D. V. & Rivera-Díaz-del-Castillo, P. E. J., 20/05/2021, In: Materials Science and Engineering: A. 815, 10 p., 141229.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  62. Published

    Facile route to implement transformation strengthening in titanium alloys

    Zhao, G., Xu, X., Dye, D., Rivera-Díaz-del-Castillo, P. E. J. & Petrinic, N., 1/02/2022, In: Scripta Materialia. 208, 5 p., 114362.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  63. Published

    Modelling stress relaxation after hot deformation: Microstructure-property relationships in Nb-bearing steels

    Zhao, J., Yang, Q., Eskandari Sabzi, H., Wen, W. & Rivera-Díaz-del-Castillo, P. E. J., 1/04/2022, In: International Journal of Plasticity. 151, 18 p., 103219.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1 2 Next

Back to top