Home > Research > Publications & Outputs > Effect of particle loading on the stability of ...
View graph of relations

Effect of particle loading on the stability of the water based iron-oxide nanofluids

Research output: Contribution to Journal/MagazineJournal articlepeer-review

Published

Standard

Effect of particle loading on the stability of the water based iron-oxide nanofluids. / Arifutzzaman, A.; Ismail, A.F.; Khan, A.A. et al.
In: International Journal of Advanced Science and Technology, Vol. 29, No. 1, 24.01.2020, p. 1326-1333.

Research output: Contribution to Journal/MagazineJournal articlepeer-review

Harvard

Arifutzzaman, A, Ismail, AF, Khan, AA, Alam, MZ & Saidur, R 2020, 'Effect of particle loading on the stability of the water based iron-oxide nanofluids', International Journal of Advanced Science and Technology, vol. 29, no. 1, pp. 1326-1333.

APA

Arifutzzaman, A., Ismail, A. F., Khan, A. A., Alam, M. Z., & Saidur, R. (2020). Effect of particle loading on the stability of the water based iron-oxide nanofluids. International Journal of Advanced Science and Technology, 29(1), 1326-1333.

Vancouver

Arifutzzaman A, Ismail AF, Khan AA, Alam MZ, Saidur R. Effect of particle loading on the stability of the water based iron-oxide nanofluids. International Journal of Advanced Science and Technology. 2020 Jan 24;29(1):1326-1333.

Author

Arifutzzaman, A. ; Ismail, A.F. ; Khan, A.A. et al. / Effect of particle loading on the stability of the water based iron-oxide nanofluids. In: International Journal of Advanced Science and Technology. 2020 ; Vol. 29, No. 1. pp. 1326-1333.

Bibtex

@article{bc28be09001a4d5c9f5f3b93cb7587e5,
title = "Effect of particle loading on the stability of the water based iron-oxide nanofluids",
abstract = "Dispersion stability is a crucial challenge for a nanofluid to obtained a uniform dispersion. The main aim of this research is to develop stability monitoring approach by experimental investigation of ultra violet-visible (UV-vis) absorbance of deionized water (DW) based ironoxide (maghemite: MH) nanoparticles dispersed nanofluids (MH/DW). Five different samples were prepared with increasing the loading of MH nanoparticles varied from 0.065 to 0.157 mg/ml in DW. Primarily digital photographs were captured to observed the sedimentation of MH/DW the nanofluids. A method was developed to monitor the quantitative stability of relative concentrations of MH/DW nanofluids. Optical absorbance measurements were conducted using UV-vis absorbancespectroscopy by varying the light wavelength from 200 to 800 nm. Photographs of MH/DW nanofluids after preparation of ~ 25 days shown uniform and there was no precipitation was visible in the suspensions. For a certain loading of MH particle, with the increasing wavelength absorbance was found to be increased. Absorbance peaks were created at wavelength of ~ 360 nm and then decreased monotonically with the increasing wavelength. The relative concentration of the MH/DW nanofluids was declined when increase the precipitation concentration with time due to slight agglomeration. After ~ 600 hours, the minimum and maximum precipitation rates were found ~ 0.27 and ~ 2.5 % for MH/DW nanofluid with the MH concentration of 0.065 and 0.157 mg/ml respectively. Amount of MH nanoparticle loading affects the rate of sedimentations of the produced MH/DW nanofluids.",
keywords = "Stability, iron oxide, absorbance, relative concentration and nanofluid",
author = "A. Arifutzzaman and A.F. Ismail and A.A. Khan and M.Z. Alam and R. Saidur",
year = "2020",
month = jan,
day = "24",
language = "English",
volume = "29",
pages = "1326--1333",
journal = "International Journal of Advanced Science and Technology",
issn = "2207-6360",
publisher = "Science and Engineering Research Support Society",
number = "1",

}

RIS

TY - JOUR

T1 - Effect of particle loading on the stability of the water based iron-oxide nanofluids

AU - Arifutzzaman, A.

AU - Ismail, A.F.

AU - Khan, A.A.

AU - Alam, M.Z.

AU - Saidur, R.

PY - 2020/1/24

Y1 - 2020/1/24

N2 - Dispersion stability is a crucial challenge for a nanofluid to obtained a uniform dispersion. The main aim of this research is to develop stability monitoring approach by experimental investigation of ultra violet-visible (UV-vis) absorbance of deionized water (DW) based ironoxide (maghemite: MH) nanoparticles dispersed nanofluids (MH/DW). Five different samples were prepared with increasing the loading of MH nanoparticles varied from 0.065 to 0.157 mg/ml in DW. Primarily digital photographs were captured to observed the sedimentation of MH/DW the nanofluids. A method was developed to monitor the quantitative stability of relative concentrations of MH/DW nanofluids. Optical absorbance measurements were conducted using UV-vis absorbancespectroscopy by varying the light wavelength from 200 to 800 nm. Photographs of MH/DW nanofluids after preparation of ~ 25 days shown uniform and there was no precipitation was visible in the suspensions. For a certain loading of MH particle, with the increasing wavelength absorbance was found to be increased. Absorbance peaks were created at wavelength of ~ 360 nm and then decreased monotonically with the increasing wavelength. The relative concentration of the MH/DW nanofluids was declined when increase the precipitation concentration with time due to slight agglomeration. After ~ 600 hours, the minimum and maximum precipitation rates were found ~ 0.27 and ~ 2.5 % for MH/DW nanofluid with the MH concentration of 0.065 and 0.157 mg/ml respectively. Amount of MH nanoparticle loading affects the rate of sedimentations of the produced MH/DW nanofluids.

AB - Dispersion stability is a crucial challenge for a nanofluid to obtained a uniform dispersion. The main aim of this research is to develop stability monitoring approach by experimental investigation of ultra violet-visible (UV-vis) absorbance of deionized water (DW) based ironoxide (maghemite: MH) nanoparticles dispersed nanofluids (MH/DW). Five different samples were prepared with increasing the loading of MH nanoparticles varied from 0.065 to 0.157 mg/ml in DW. Primarily digital photographs were captured to observed the sedimentation of MH/DW the nanofluids. A method was developed to monitor the quantitative stability of relative concentrations of MH/DW nanofluids. Optical absorbance measurements were conducted using UV-vis absorbancespectroscopy by varying the light wavelength from 200 to 800 nm. Photographs of MH/DW nanofluids after preparation of ~ 25 days shown uniform and there was no precipitation was visible in the suspensions. For a certain loading of MH particle, with the increasing wavelength absorbance was found to be increased. Absorbance peaks were created at wavelength of ~ 360 nm and then decreased monotonically with the increasing wavelength. The relative concentration of the MH/DW nanofluids was declined when increase the precipitation concentration with time due to slight agglomeration. After ~ 600 hours, the minimum and maximum precipitation rates were found ~ 0.27 and ~ 2.5 % for MH/DW nanofluid with the MH concentration of 0.065 and 0.157 mg/ml respectively. Amount of MH nanoparticle loading affects the rate of sedimentations of the produced MH/DW nanofluids.

KW - Stability

KW - iron oxide

KW - absorbance

KW - relative concentration and nanofluid

M3 - Journal article

VL - 29

SP - 1326

EP - 1333

JO - International Journal of Advanced Science and Technology

JF - International Journal of Advanced Science and Technology

SN - 2207-6360

IS - 1

ER -