TY - CONF

T1 - Geometric Thermo Electricity (GTE) - Towards "Junction-Less" Unconventional Thermoelectric Devices

AU - Kolosov, Oleg

AU - El Sachat, Alexandros

AU - Evangeli, Charalambos

AU - Gonzalez-Munoz, Sergio

AU - Xiao, Peng

AU - Castanon, Eli

AU - McCann, Edward

AU - Hamer, Matthew

AU - Zultak, Johanna

AU - Kazakova, Olga

AU - Gorbachev, R. V.

PY - 2024/4/26

Y1 - 2024/4/26

N2 - Oleg Kolosov1,Alexandros El Sachat2,Charalambos Evangeli1,Sergio Gonzalez-Munoz3,Peng Xiao4,Elisa Castanon4,Edward McCann1,Matthew Hamer4,Johanna Zultak4,Olga Kazakova5,Roman Gorbachev4Lancaster University1,NCSR "Demokritos"2,ICN23,The University of Manchester4,National Physical Laboratory5Traditionally, thermoelectric (TE) phenomena require junctions between two dissimilar materials to either generate the current when opposing junctions are held at two differing temperatures (Seebeck effect) or to cool and heat the opposing junctions when the external current is applied (Peltier effect). The two materials must have a different thermoelectric (Seebeck) coefficient, S (defined as the voltage V per temperature difference ΔT) in order to observe either Seebeck or Peltier effect. Nevertheless, the recently discovered phenomenon of “Geometrical Thermoelectricity", GTE [1] indicated that a nanoscale constriction (of the order of 50-200 nm) in the monolayer of two-dimensional material (2DM) graphene on the insulating SiO2/Si substrate acts as de-facto different material with the different Seebeck coefficient, changing the Seebeck coefficient solely by geometrical patterning and allowing to create TE devices out of a single material [2], avoiding the need for another material and a junction between two materials.Here we investigate the origin of the GTE phenomenon using a well-defined structure of graphene encapsulated between hexagonal boron nitride (hBN) layers with asymmetric constrictions (flat-taper/flat-flat/taper-flat) and under different polarity of the carriers using the back-gating. By using Scanning Thermal Gate Microscopy (STGM) [3] where a heated nanoscale tip of an atomic force microscope is scanned across the material or device surface to produce a map of thermovoltage as a function of tip position, we established that the GTE modification of Seebeck coefficient does not a) depend of the symmetry of the junction nor b) on the polarity of the carriers (electrons or holes) and therefore c) is directly linked solely to the geometrical dimensions of the constriction.Furthermore, we explored whether GTE can be used for modification of the Seebeck coefficient in the area of 2D material rather than for a single point (nanoscale constriction). We performed the FIB milling of arrays of holes of about 50 nm in diameter in a thick 50 nm layer of 2D material SnSe2 using the varying pitch, density and ordering, showing that it is indeed possible to create multi-μm size areas of material with a very different Seebeck coefficient. By combining STGM with scanning thermal microscopy (SThM) [4] we found that the holes modify the heat transport on the distance of less than 20 nm, whereas the modification of the Seebeck coefficient is extended to the distances larger than 500 nm, suggesting the characteristic TE modification length is linked with the charge carriers.In summary, we conclusively linked the GTE phenomenon to the geometrical factors and demonstrated that such an effect is present in other 2D materials such as dichalcogenide SnSe2. We also showed the one can create large areas of multilayer 2D material building de-facto a new material with different TE properties while preserving its heat transport performance, paving the way for the much broader applications of GTE effect for the nanoscale and microscale cooling, heat manipulation and TE energy generation.References[1] A. Harzheim, J. Spiece, C. Evangeli, E. McCann, V. Falko, Y. W. Sheng, J. H. Warner, G. A. D. Briggs, J. A. Mol, P. Gehring, O. V. Kolosov, Nano Letters 2018, 18, 7719. https://doi.org:10.1021/acs.nanolett.8b03406[2] A. Harzheim, F. Könemann, B. Gotsmann, H. van der Zant, P. Gehring, Advanced Functional Materials 2020, 30, 2000574. https://doi.org:https://doi.org/10.1002/adfm.202000574[3] A. Harzheim, C. Evangeli, O. V. Kolosov, P. Gehring, 2D Materials 2020, 7, 041004. https://doi.org:10.1088/2053-1583/aba333[4] S. Gonzalez-Munoz, K. Agarwal, E. G. Castanon, Z. R. Kudrynskyi, Z. D. Kovalyuk, J. Spièce, O. Kazakova, A. Patanè, O. V. Kolosov, Advanced Materials Interfaces 2023, 10, 2300081. https://doi.org:https://doi.org/10.1002/admi.202300081

AB - Oleg Kolosov1,Alexandros El Sachat2,Charalambos Evangeli1,Sergio Gonzalez-Munoz3,Peng Xiao4,Elisa Castanon4,Edward McCann1,Matthew Hamer4,Johanna Zultak4,Olga Kazakova5,Roman Gorbachev4Lancaster University1,NCSR "Demokritos"2,ICN23,The University of Manchester4,National Physical Laboratory5Traditionally, thermoelectric (TE) phenomena require junctions between two dissimilar materials to either generate the current when opposing junctions are held at two differing temperatures (Seebeck effect) or to cool and heat the opposing junctions when the external current is applied (Peltier effect). The two materials must have a different thermoelectric (Seebeck) coefficient, S (defined as the voltage V per temperature difference ΔT) in order to observe either Seebeck or Peltier effect. Nevertheless, the recently discovered phenomenon of “Geometrical Thermoelectricity", GTE [1] indicated that a nanoscale constriction (of the order of 50-200 nm) in the monolayer of two-dimensional material (2DM) graphene on the insulating SiO2/Si substrate acts as de-facto different material with the different Seebeck coefficient, changing the Seebeck coefficient solely by geometrical patterning and allowing to create TE devices out of a single material [2], avoiding the need for another material and a junction between two materials.Here we investigate the origin of the GTE phenomenon using a well-defined structure of graphene encapsulated between hexagonal boron nitride (hBN) layers with asymmetric constrictions (flat-taper/flat-flat/taper-flat) and under different polarity of the carriers using the back-gating. By using Scanning Thermal Gate Microscopy (STGM) [3] where a heated nanoscale tip of an atomic force microscope is scanned across the material or device surface to produce a map of thermovoltage as a function of tip position, we established that the GTE modification of Seebeck coefficient does not a) depend of the symmetry of the junction nor b) on the polarity of the carriers (electrons or holes) and therefore c) is directly linked solely to the geometrical dimensions of the constriction.Furthermore, we explored whether GTE can be used for modification of the Seebeck coefficient in the area of 2D material rather than for a single point (nanoscale constriction). We performed the FIB milling of arrays of holes of about 50 nm in diameter in a thick 50 nm layer of 2D material SnSe2 using the varying pitch, density and ordering, showing that it is indeed possible to create multi-μm size areas of material with a very different Seebeck coefficient. By combining STGM with scanning thermal microscopy (SThM) [4] we found that the holes modify the heat transport on the distance of less than 20 nm, whereas the modification of the Seebeck coefficient is extended to the distances larger than 500 nm, suggesting the characteristic TE modification length is linked with the charge carriers.In summary, we conclusively linked the GTE phenomenon to the geometrical factors and demonstrated that such an effect is present in other 2D materials such as dichalcogenide SnSe2. We also showed the one can create large areas of multilayer 2D material building de-facto a new material with different TE properties while preserving its heat transport performance, paving the way for the much broader applications of GTE effect for the nanoscale and microscale cooling, heat manipulation and TE energy generation.References[1] A. Harzheim, J. Spiece, C. Evangeli, E. McCann, V. Falko, Y. W. Sheng, J. H. Warner, G. A. D. Briggs, J. A. Mol, P. Gehring, O. V. Kolosov, Nano Letters 2018, 18, 7719. https://doi.org:10.1021/acs.nanolett.8b03406[2] A. Harzheim, F. Könemann, B. Gotsmann, H. van der Zant, P. Gehring, Advanced Functional Materials 2020, 30, 2000574. https://doi.org:https://doi.org/10.1002/adfm.202000574[3] A. Harzheim, C. Evangeli, O. V. Kolosov, P. Gehring, 2D Materials 2020, 7, 041004. https://doi.org:10.1088/2053-1583/aba333[4] S. Gonzalez-Munoz, K. Agarwal, E. G. Castanon, Z. R. Kudrynskyi, Z. D. Kovalyuk, J. Spièce, O. Kazakova, A. Patanè, O. V. Kolosov, Advanced Materials Interfaces 2023, 10, 2300081. https://doi.org:https://doi.org/10.1002/admi.202300081

KW - Geometric thermoelectricity

KW - GTE

KW - scanning thermal gate microscopy

KW - STGM

KW - 2D materials

M3 - Abstract

T2 - 2024 MRS Spring Meeting

Y2 - 22 April 2024 through 26 July 2024

ER -