Final published version, 1.28 MB, PDF document
Final published version
Licence: Unspecified
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Mathematical Model Analysis for Mass and Rates of Woodchip IR Drying. / Pryce, Marcia; Cheneler, David; Martin, Alastair et al.
Proceedings of the 6th World Congresson Mechanical, Chemical, and Material Engineering. Avestia , 2020. HTFF 177 ( Proceedings of the 6th World Congresson Mechanical, Chemical, and Material Engineering).Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
}
TY - GEN
T1 - Mathematical Model Analysis for Mass and Rates of Woodchip IR Drying
AU - Pryce, Marcia
AU - Cheneler, David
AU - Martin, Alastair
AU - Aiouache, Farid
PY - 2020/8/16
Y1 - 2020/8/16
N2 - The production of woodchip biomass, by meansofdrying, is of importancewith respect to environmental concerns. This has been highlighted by reports of carbon production through utility usage of commercial sites, where drying is often among the most energy intensive operations within industrial processes. It is therefore crucial to dry wood in efficient way in order to derive high quality products and increase end use process efficiency. Akey component for dry fuel suppliers is the moisture content of the woodchip product. Halogen (infrared) drying is the foremost method used on site to measure moisture content ofwood fuel for supply,as this takes less time,asmaller sample size and less human interaction, in comparison with convective drying. This study investigated the drying behaviour of static woodchip fuel using an infrared source at temperatures rangingfrom 50 to 80°C and atmospheric pressure. With the longest drying time (time until a rate of 0.001g per 99 seconds is reached) of just over three hours and the shortest under an hour and a half. Mathematical models of the drying rates were determined through statistical analysis and the significance of the initial drying periods relevant to rates of falling and constant profiles were analysed for the different temperatures. Statistically the model with the best fit at the temperatures measured was a diffusion model with 6 exponential terms and coefficients with the SSE value 0.2424, R2of 0.9989 and RMSE of less than0.009. Models with 4 coefficients were also able to fit the data well with SSE values of below 0.03. Differentiating the resulting equations of fit at constant temperature resulted in models for the rate of mass lost over time.
AB - The production of woodchip biomass, by meansofdrying, is of importancewith respect to environmental concerns. This has been highlighted by reports of carbon production through utility usage of commercial sites, where drying is often among the most energy intensive operations within industrial processes. It is therefore crucial to dry wood in efficient way in order to derive high quality products and increase end use process efficiency. Akey component for dry fuel suppliers is the moisture content of the woodchip product. Halogen (infrared) drying is the foremost method used on site to measure moisture content ofwood fuel for supply,as this takes less time,asmaller sample size and less human interaction, in comparison with convective drying. This study investigated the drying behaviour of static woodchip fuel using an infrared source at temperatures rangingfrom 50 to 80°C and atmospheric pressure. With the longest drying time (time until a rate of 0.001g per 99 seconds is reached) of just over three hours and the shortest under an hour and a half. Mathematical models of the drying rates were determined through statistical analysis and the significance of the initial drying periods relevant to rates of falling and constant profiles were analysed for the different temperatures. Statistically the model with the best fit at the temperatures measured was a diffusion model with 6 exponential terms and coefficients with the SSE value 0.2424, R2of 0.9989 and RMSE of less than0.009. Models with 4 coefficients were also able to fit the data well with SSE values of below 0.03. Differentiating the resulting equations of fit at constant temperature resulted in models for the rate of mass lost over time.
U2 - 10.11159/htff20.177
DO - 10.11159/htff20.177
M3 - Conference contribution/Paper
T3 - Proceedings of the 6th World Congresson Mechanical, Chemical, and Material Engineering
BT - Proceedings of the 6th World Congresson Mechanical, Chemical, and Material Engineering
PB - Avestia
T2 - Proceedings of the 6th World Congresson Mechanical, Chemical, and Material Engineering
Y2 - 16 August 2020 through 18 August 2020
ER -