Home > Research > Researchers > Professor Andrew Kennedy > Publications

Professor Andrew Kennedy

Chair in Advanced Manufacturing

  1. 2020
  2. Published

    Compression moulding and injection over moulding of porous PEEK components

    Siddiq, A. & Kennedy, A. R., 1/11/2020, In : Journal of the Mechanical Behavior of Biomedical Materials. 111, 10 p., 103996.

    Research output: Contribution to journalJournal article

  3. Published

    A comparison of the manufacture and mechanical performance of porous aluminium and aluminium syntactic foams made by vacuum-assisted casting

    Cheneler, D. & Kennedy, A. R., 3/07/2020, In : Materials Science and Engineering A. 789, 9 p., 139527.

    Research output: Contribution to journalJournal article

  4. Published

    Generation of graded porous structures by control of process parameters in the selective laser melting of a fixed ratio salt-metal feedstock

    Aboulkhair, N. T., Zhao, G., Hague, R. J. M., Kennedy, A. R., Ashcroft, I. A. & Clare, A. T., 1/07/2020, In : Journal of Manufacturing Processes. 55, p. 249-253 5 p.

    Research output: Contribution to journalJournal article

  5. Published

    Measurement and modelling of the elastic defection of novel metal syntactic foam composite sandwich structures in 3-point bending

    Cheneler, D. & Kennedy, A. R., 1/03/2020, In : Composite Structures. 235, 6 p., 111817.

    Research output: Contribution to journalJournal article

  6. 2019
  7. Published

    Development of metal matrix composites by direct energy deposition of ‘satellited’ powders

    Farayibi, P. K., Abioye, T. E., Kennedy, A. & Clare, A. T., 1/09/2019, In : Journal of Manufacturing Processes. 45, p. 429-437 9 p.

    Research output: Contribution to journalJournal article

  8. Published

    Numerical modelling of the sound absorption spectra for bottleneck dominated porous metallic structures

    Otaru, A. J., Morvan, H. P. & Kennedy, A. R., 1/08/2019, In : Applied Acoustics. 151, p. 164-171 8 p.

    Research output: Contribution to journalJournal article

  9. Published

    Investigation of the Pressure Drop Across Packed Beds of Spherical Beads: Comparison of Empirical Models With Pore-Level Computational Fluid Dynamics Simulations

    Otaru, A. J. & Kennedy, A. R., 8/04/2019, In : Journal of Fluids Engineering. 141, 7, 9 p., 071305.

    Research output: Contribution to journalJournal article

  10. Published

    Airflow measurement across negatively infiltration processed porous aluminum structures

    Otaru, A. J., Morvan, H. P. & Kennedy, A. R., 1/04/2019, In : AIChE Journal. 65, 4, p. 1355-1364 10 p.

    Research output: Contribution to journalJournal article

  11. Published

    In vitro cellular testing of strontium/calcium substituted phosphate glass discs and microspheres shows potential for bone regeneration

    Patel, U., Macri-Pellizzeri, L., Zakir Hossain, K. M., Scammell, B. E., Grant, D. M., Scotchford, C. A., Hannon, A. C., Kennedy, A. R., Barney, E. R., Ahmed, I. & Sottile, V., 1/03/2019, In : Journal of Tissue Engineering and Regenerative Medicine. 13, 3, p. 396-405 10 p.

    Research output: Contribution to journalJournal article

  12. 2018
  13. Published

    The Prediction of isothermal cyclic plasticity in 7175-T7351 aluminium alloy with particular emphasis on thermal ageing effects

    Lam Wing Cheong, M. F., Rouse, J. P., Hyde, C. J. & Kennedy, A., 30/09/2018, In : International Journal of Fatigue. 114, p. 92-108 17 p.

    Research output: Contribution to journalJournal article

  14. Published

    Salt-metal feedstocks for the creation of stochastic cellular structures with controlled relative density by powder bed fabrication

    Zhao, G., Ashcroft, I. A., Hague, R. J. M., Kennedy, A. R. & Clare, A. T., 5/07/2018, In : Materials and Design. 149, p. 63-72 10 p.

    Research output: Contribution to journalJournal article

  15. Published

    Modelling and optimisation of sound absorption in replicated microcellular metals

    Otaru, A. J., Morvan, H. P. & Kennedy, A. R., 06/2018, In : Scripta Materialia. 150, p. 152-155 4 p.

    Research output: Contribution to journalJournal article

  16. Published

    Measurement and simulation of pressure drop across replicated porous aluminium in the Darcy-Forchheimer regime

    Otaru, A. J., Morvan, H. P. & Kennedy, A. R., 1/05/2018, In : Acta Materialia. 149, p. 265-273 9 p.

    Research output: Contribution to journalJournal article

  17. Published

    Pressure-assisted infiltration of molten metals into non-rigid, porous carbon fibre structures

    Constantin, H., Harper, L. & Kennedy, A. R., 1/05/2018, In : Journal of Materials Processing Technology. 255, p. 66-75 10 p.

    Research output: Contribution to journalJournal article

  18. Published

    Porous calcium phosphate glass microspheres for orthobiologic applications

    Hossain, K. M. Z., Patel, U., Kennedy, A., Macri-Pellizzeri, L., Sottile, V., Grant, D. M., Scammell, B. E. & Ahmed, I., 05/2018, In : Acta Biomaterialia. 72, p. 396-406 11 p.

    Research output: Contribution to journalJournal article

  19. 2017
  20. Published

    A water-soluble core material for manufacturing hollow composite sections

    Xiao, Z., Harper, L. T., Kennedy, A. R. & Warrior, N. A., 15/12/2017, In : Composite Structures. 182, p. 380-390 11 p.

    Research output: Contribution to journalJournal article

  21. Published

    The processing and properties of syntactic Al foams containing low cost expanded glass particles

    Wright, A. & Kennedy, A. R., 11/2017, In : Advanced Engineering Materials. 19, 11, 6 p., 1600467.

    Research output: Contribution to journalJournal article

  22. Published

    Effect of Magnesium Addition on the Cell Structure of Foams Produced From Re-melted Aluminum Alloy Scrap

    Vinod-Kumar, G. S., Heim, K., Jerry, J., Garcia-Moreno, F., Kennedy, A. R. & Banhart, J., 1/10/2017, In : Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 48, 5, p. 2551-2563 13 p.

    Research output: Contribution to journalJournal article

  23. Published

    Structural and physico-chemical analysis of calcium/ strontium substituted, near-invert phosphate based glasses for biomedical applications

    Patel, U., Moss, R. M., Hossain, K. M. Z., Kennedy, A. R., Ahmed, I. & Hannon, A. C., 15/09/2017, In : Acta Biomaterialia. 60, p. 109-127 19 p.

    Research output: Contribution to journalJournal article

  24. Published

    Cold sprayed metal-ceramic coatings using satellited powders

    Al-Hamdani, K. S., Murray, J. W., Hussain, T., Kennedy, A. & Clare, A. T., 1/07/2017, In : Materials Letters. 198, p. 184-187 4 p.

    Research output: Contribution to journalJournal article

  25. Published

    A novel method for the manufacture of porous structures with multi-component, coated pores

    Siddiq, A. R. & Kennedy, A. R., 1/06/2017, In : Materials Letters. 196, p. 324-327 4 p.

    Research output: Contribution to journalJournal article

  26. Published

    Pore-scale numerical investigation of pressure drop behaviour across open-cell metal foams

    Carvalho, T. P. D., Morvan, H., Hargreaves, D., Oun, H. & Kennedy, A., 03/2017, In : Transport in Porous Media. 117, 2, p. 311-336 26 p.

    Research output: Contribution to journalJournal article

  27. 2016
  28. Published

    Assessing the potential for multi-functional textquotedbllefthybridtextquotedblright porous Al-phase change material structures

    Kennedy, A. R., 15/12/2016, In : Materials Letters. 185, p. 339-341 3 p.

    Research output: Contribution to journalJournal article

  29. Published

    The permeability of virtual macroporous structures generated by sphere packing models: comparison with analytical models

    Otaru, A. J. & Kennedy, A. R., 11/2016, In : Scripta Materialia. 124, p. 30-33 4 p.

    Research output: Contribution to journalJournal article

  30. Published

    Effect of solidification rate on pore connectivity of aluminium foams and its consequences on mechanical properties

    Lázaro, J., Solórzano, E., Rodríguez-Perez, M. A. & Kennedy, A. R., 30/08/2016, In : Materials Science and Engineering: A. 672, p. 236-246 11 p.

    Research output: Contribution to journalJournal article

  31. 2015
  32. Published

    Tailoring the pressure-drop in multi-layered open-cell porous inconel structures

    Oun, H. & Kennedy, A. R., 12/2015, In : Journal of Porous Materials. 22, 6, p. 1627-1633 7 p.

    Research output: Contribution to journalJournal article

  33. Published

    The stabilising effect of oxides in foamed aluminium alloy scrap

    Kumar, G. S. V., García-Moreno, F., Banhart, J. & Kennedy, A. R., 1/09/2015, In : International Journal of Materials Research. 106, 9, p. 978-987 10 p.

    Research output: Contribution to journalJournal article

  34. Published

    Porous titanium manufactured by a novel powder tapping method using spherical salt bead space holders: characterisation and mechanical properties

    Jia, J., Siddiq, A. R. & Kennedy, A. R., 08/2015, In : Journal of the Mechanical Behavior of Biomedical Materials. 48, p. 229-240 12 p.

    Research output: Contribution to journalJournal article

  35. Published

    Structure-property-processing relationships for stainless steel foams made by mechanical aeration of powder slurries

    Lin, X. & Kennedy, A. R., 1/06/2015, In : Advanced Engineering Materials. 17, 6, p. 839-845 7 p.

    Research output: Contribution to journalJournal article

  36. Published

    Porous poly-ether ether ketone (PEEK) manufactured by a novel powder route using near-spherical salt bead porogens: characterisation and mechanical properties

    Siddiq, A. R. & Kennedy, A. R., 1/02/2015, In : Materials Science and Engineering: C . 47, p. 180-188 9 p.

    Research output: Contribution to journalJournal article

  37. Published

    A study of an improved cutting mechanism of composite materials using novel design of diamond micro-core drills

    Butler-Smith, P. W., Axinte, D. A., Daine, M., Kennedy, A. R., Harper, L. T., Bucourt, J. F. & Ragueneau, R., 01/2015, In : International Journal of Machine Tools and Manufacture. 88, p. 175-183 9 p.

    Research output: Contribution to journalJournal article

  38. Published

    Discrete element modelling of flexible fibre packing

    Langston, P., Kennedy, A. R. & Constantin, H., 01/2015, In : Computational Materials Science. 96, A, p. 108-116 9 p.

    Research output: Contribution to journalJournal article

  39. Published

    Experimental and tomography-based CFD investigations of the flow in open cell metal foams with application to aero engine separators

    De Carvalho, T. P., Morvan, H. P., Hargreaves, D., Oun, H. & Kennedy, A., 2015, Heat Transfer. American Society of Mechanical Engineers (ASME), Vol. 5C. 11 p. GT2015-43509

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  40. 2014
  41. Published

    Discrete element modelling of the packing of spheres and its application to the structure of porous metals made by infiltration of packed beds of NaCl beads

    Langston, P. & Kennedy, A. R., 1/12/2014, In : Powder Technology. 268, p. 210-218 9 p.

    Research output: Contribution to journalJournal article

  42. Published

    Experimental investigation of pressure-drop characteristics across multi-layer porous metal structures

    Oun, H. & Kennedy, A. R., 12/2014, In : Journal of Porous Materials. 21, 6, p. 1133-1141 9 p.

    Research output: Contribution to journalJournal article

Back to top