Home > Research > Researchers > Professor Andrew Kennedy > Publications

Research

Professor Andrew Kennedy

Chair in Advanced Manufacturing, Head of Department

1 - 25 out of 48Page size: 25
RSS feed of this list
  1. 2025
  2. E-pub ahead of print

    Low-density collimators for remote radiation characterisation tasks

    Tsitsimpelis, I., Kennedy, A., Lennox, B., Livens, F. R., Mathur, K., Randall, O., Taylor, J., Watson, S., West, A. & Joyce, M. J., 31/10/2025, In: Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 1079, 170701.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  3. E-pub ahead of print

    Multi-objective optimization of the laser powder-bed fusion process of 17–4 PH stainless steel: Balancing quality and processing rate

    Ding, C., Kennedy, A. & Huang, Y., 30/11/2025, In: Optics and Laser Technology. 189, 113073.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  4. 2024
  5. Published

    Effect of the Material Extrusion Process Parameters on the Compressive Properties of Additively Manufactured Foamed and Nonfoamed Polylactic Acid Structures

    Yousefi Kanani, A. & Kennedy, A., 1/02/2024, In: 3D Printing and Additive Manufacturing. 11, 1, p. 207-218 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  6. 2023
  7. Published

    Robust Reinforcement Learning Based Visual Servoing with Convolutional Features

    Fei, H., Wang, Z. & Kennedy, A., 31/12/2023, In: IFAC-PapersOnLine. 56, 2, p. 9781-9786 6 p.

    Research output: Contribution to Journal/Magazine › Conference article › peer-review

  8. Published

    Boosting visual servoing performance through RGB-based methods

    Fei, H., Wang, Z., Tedeschi, S. & Kennedy, A., 21/08/2023, In: Robotic Intelligence and Automation. 43, 4, p. 468-475 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  9. Published

    Experimental and numerical analysis of additively manufactured foamed sandwich beams

    Yousefi Kanani, A. & Kennedy, A., 15/05/2023, In: Composite Structures. 312, 9 p., 116866.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  10. Published

    Electron beam weld penetration depth prediction improved by beam characterisation

    Yin, Y., Kennedy, A., Mitchell, T., Sieczkiewicz, N., Jefimovs, V. & Tian, Y., 31/03/2023, In: International Journal of Advanced Manufacturing Technology. 125, 1-2, p. 399-415 17 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  11. 2022
  12. Published

    Materials and Processing

    Kennedy, A. & Shipway, P., 27/12/2022, Introduction to Mechanical Engineering: Part 1. Clifford, M. (ed.). London: Routledge, p. 89-184 96 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  13. Published

    Data-driven Process Parameter Optimisation for Laser Wire Metal Additive Manufacturing

    Roberts, M., Xia, M. & Kennedy, A., 10/10/2022, Proceedings of the 27th International Conference on Automation & Computing. IEEE, p. 1-6 6 p. 124

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  14. Published

    Effects of Braid Angle and Material Modulus on the Negative Poisson’s Ratio of Braided Auxetic Yarns

    Shah, A. A., Shahid, M., Hardy, J. G., Siddiqui, N. A., Kennedy, A. R., Gul, I. H., Rehman, S. U. & Nawab, Y., 27/05/2022, In: Crystals. 12, 6, 16 p., e781.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  15. 2021
  16. Published

    Fault diagnosis of a rotor-bearing system under variable rotating speeds using two-stage parameter transfer and infrared thermal images

    Shao, H., Li, W., Xia, M., Zhang, Y., Shen, C., Williams, D., Kennedy, A. & De Silva, C. W., 10/09/2021, In: IEEE Transactions on Instrumentation and Measurement. 70, 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  17. 2020
  18. Published

    Compression moulding and injection over moulding of porous PEEK components

    Siddiq, A. & Kennedy, A. R., 1/11/2020, In: Journal of the Mechanical Behavior of Biomedical Materials. 111, 10 p., 103996.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  19. Published

    A comparison of the manufacture and mechanical performance of porous aluminium and aluminium syntactic foams made by vacuum-assisted casting

    Cheneler, D. & Kennedy, A. R., 3/07/2020, In: Materials Science and Engineering A. 789, 9 p., 139527.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  20. Published

    Generation of graded porous structures by control of process parameters in the selective laser melting of a fixed ratio salt-metal feedstock

    Aboulkhair, N. T., Zhao, G., Hague, R. J. M., Kennedy, A. R., Ashcroft, I. A. & Clare, A. T., 1/07/2020, In: Journal of Manufacturing Processes. 55, p. 249-253 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  21. Published

    Measurement and modelling of the elastic defection of novel metal syntactic foam composite sandwich structures in 3-point bending

    Cheneler, D. & Kennedy, A. R., 1/03/2020, In: Composite Structures. 235, 6 p., 111817.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  22. 2019
  23. Published

    Development of metal matrix composites by direct energy deposition of ‘satellited’ powders

    Farayibi, P. K., Abioye, T. E., Kennedy, A. & Clare, A. T., 1/09/2019, In: Journal of Manufacturing Processes. 45, p. 429-437 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  24. Published

    Numerical modelling of the sound absorption spectra for bottleneck dominated porous metallic structures

    Otaru, A. J., Morvan, H. P. & Kennedy, A. R., 1/08/2019, In: Applied Acoustics. 151, p. 164-171 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  25. Published

    Investigation of the Pressure Drop Across Packed Beds of Spherical Beads: Comparison of Empirical Models With Pore-Level Computational Fluid Dynamics Simulations

    Otaru, A. J. & Kennedy, A. R., 8/04/2019, In: Journal of Fluids Engineering. 141, 7, 9 p., 071305.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  26. Published

    Airflow measurement across negatively infiltration processed porous aluminum structures

    Otaru, A. J., Morvan, H. P. & Kennedy, A. R., 1/04/2019, In: AIChE Journal. 65, 4, p. 1355-1364 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  27. Published

    In vitro cellular testing of strontium/calcium substituted phosphate glass discs and microspheres shows potential for bone regeneration

    Patel, U., Macri-Pellizzeri, L., Zakir Hossain, K. M., Scammell, B. E., Grant, D. M., Scotchford, C. A., Hannon, A. C., Kennedy, A. R., Barney, E. R., Ahmed, I. & Sottile, V., 1/03/2019, In: Journal of Tissue Engineering and Regenerative Medicine. 13, 3, p. 396-405 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  28. 2018
  29. Published

    The Prediction of isothermal cyclic plasticity in 7175-T7351 aluminium alloy with particular emphasis on thermal ageing effects

    Lam Wing Cheong, M. F., Rouse, J. P., Hyde, C. J. & Kennedy, A., 30/09/2018, In: International Journal of Fatigue. 114, p. 92-108 17 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  30. Published

    Salt-metal feedstocks for the creation of stochastic cellular structures with controlled relative density by powder bed fabrication

    Zhao, G., Ashcroft, I. A., Hague, R. J. M., Kennedy, A. R. & Clare, A. T., 5/07/2018, In: Materials and Design. 149, p. 63-72 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  31. Published

    Modelling and optimisation of sound absorption in replicated microcellular metals

    Otaru, A. J., Morvan, H. P. & Kennedy, A. R., 06/2018, In: Scripta Materialia. 150, p. 152-155 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  32. Published

    Measurement and simulation of pressure drop across replicated porous aluminium in the Darcy-Forchheimer regime

    Otaru, A. J., Morvan, H. P. & Kennedy, A. R., 1/05/2018, In: Acta Materialia. 149, p. 265-273 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  33. Published

    Pressure-assisted infiltration of molten metals into non-rigid, porous carbon fibre structures

    Constantin, H., Harper, L. & Kennedy, A. R., 1/05/2018, In: Journal of Materials Processing Technology. 255, p. 66-75 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1 2 Next

Back to top