Home > Research > Researchers > Dr Andrew Pinkerton > Publications

Dr Andrew Pinkerton

Senior Lecturer

  1. 2018
  2. Published

    Underwater Cutting of Metals with Photons

    Cheneler, D., Pinkerton, A., Khan, A. & Nyamayaro, C., 3/07/2018.

    Research output: Contribution to conference - Without ISBN/ISSN Poster

  3. 2016
  4. Published

    Lasers in additive manufacturing

    Pinkerton, A. J., 04/2016, In: Optics and Laser Technology. 78, Part A, p. 25-32 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  5. 2015
  6. Published

    Advances in the modelling of laser direct metal deposition (invited)

    Pinkerton, A., 02/2015, In: Journal of Laser Applications. 27, S1, 7 p., S15001.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  7. 2014
  8. Published

    Combined vibration and thermal analysis for the condition monitoring of rotating machinery

    Nembhard, A., Sinha, J., Pinkerton, A. & Elbhbah, K., 05/2014, In: Structural Health Monitoring. 13, 3, p. 281-295 15 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  9. Published

    Parametric study of development of inconel-steel functionally graded materials by laser direct metal deposition

    Shah, K., ul Haq, I., Khan, A., Shah, S. A., Khan, M. & Pinkerton, A., 02/2014, In: Materials and Design. 54, p. 531-538 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  10. Published

    Condition monitoring of rotating machines using vibration and bearing temperature measurements

    Nembhard, A., Sinha, J., Pinkerton, A. & Elbhbah, K., 2014, Advances in Condition Monitoring of Machinery in Non-stationary Operations: Proceedings of the 3rd International Conference on Condition Monitoring of Machinery in Non-Stationary Operations (CMMN02013). Dalpiaz, G., Rubini, R., D'Elia, G., Cocconcelli, M., Chaari, F., Zimroz, R. & Bartelmus, W. (eds.). Berlin: Springer Verlag, p. 159-169 11 p. (Lecture Notes in Mechanical Engineering).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  11. 2013
  12. Published

    Direct laser deposition with different types of 316L steel particle: a comparative study of final part properties

    Mahmood, K. & Pinkerton, A., 04/2013, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 227, 4, p. 520-531 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  13. Published

    An anisotropic enhanced thermal conductivity approach for modelling laser melt pools for Ni-base super alloys

    Safdar, S., Pinkerton, A. J., Li, L., Sheikh, M. & Withers, P., 1/02/2013, In: Applied Mathematical Modelling. 37, 3, p. 1187-1195 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  14. Published

    A coupled approach to weld pool, phase and residual stress modelling of laser direct metal deposition (LDMD) processes

    Vogel, M., Khan, M., Ibarra-Medina, J., Pinkerton, A., N'Dri, N. & Megahed, M., 2013, 2nd World Congress on Integrated Computational Materials Engineering. Li, M., Campbell, C., Thornton, K., Holm, E. & Gumbsch, P. (eds.). Wiley, p. 231-236 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  15. Published
  16. Published

    Vibration-based delamination detection in a composite plate

    Ullah, I., Sinha, J. & Pinkerton, A., 2013, In: Mechanics of Advanced Materials and Structures. 20, 7, p. 536-551 16 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  17. 2012
  18. Published

    Laser clad corrosion protection for mild and harsh environments

    Mahmood, K., Stevens, N. & Pinkerton, A. J., 09/2012, In: Surface Engineering. 28, 8, p. 576-584 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  19. Published

    Laser surface modification using Inconel 617 machining swarf as coating material

    Mahmood, K., Stevens, N. & Pinkerton, A. J., 06/2012, In: Journal of Materials Processing Technology. 212, 6, p. 1271-1280 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  20. Published

    A comparison of laser additive manufacturing using gas and plasma-atomized Ti-6A1-4V powders

    Ahsan, M. N., Pinkerton, A. J. & Ali, L., 2012, Innovative Developments in Virtual and Physical Prototyping. Bartolo, PJ., DeLemos, ACS., Tojeira, APO., Pereira, AMH., Mateus, AJ., Mendes, ALA., DosSantos, C., Freitas, DMF., Bartolo, HM., Almeida, HD., IM, D., Dias, JR., Domingos, MAN., Alves, NMF., Pereira, RFB., Patricio, TMF. & Ferreira, TMD. (eds.). Boca Raton: CRC PRESS-TAYLOR & FRANCIS GROUP, p. 625-633 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  21. Published

    A verified model of transient and residual stresses in laser direct metal deposition

    Vogel, M., Khan, M., Ibarra-Medina, J., Pinkerton, A. J., N'Dri, N. & Megahed, M., 2012, Proceedings of the 31st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. Paper 304

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  22. Published

    Analysis and simulation of the effects of melt pool flow during laser deposition of a multiphase material

    Khan, M., Vogel, M., Ibarra-Medina, J., Pinkerton, A. J., N'Dri, N. & Megahed, M., 2012, Proceedings of the 31st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. Paper P133

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  23. Published

    Characterization of weld bead geometry in fibre laser butt welding of mild steel sheets by means of statistical modelling

    Eghlio, R. M., Pinkerton, A. J. & Li, L., 2012, In: Lasers in Engineering. 22, 5-6, p. 281-298 18 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  24. Published

    Guest Editorial: The 36th MATADOR Conference 2010

    Pinkerton, A. J., 2012, In: Materials and Manufacturing Processes. 27, 4, p. 363-363 1 p.

    Research output: Contribution to Journal/MagazineEditorialpeer-review

  25. 2011
  26. Published

    Numerical investigation of powder heating in coaxial laser metal deposition

    Ibarra-Medina, J. & Pinkerton, A. J., 11/2011, In: Surface Engineering. 27, 10, p. 754-761 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  27. Published

    A comparative study of laser direct metal deposition characteristics using gas and plasma-atomized Ti-6Al-4V powders

    Ahsan, M. N., Pinkerton, A. J., Moat, R. J. & Shackleton, J., 25/09/2011, In: Materials Science and Engineering: A. 528, 25-26, p. 7648-7657 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  28. Published

    An analytical-numerical model of laser direct metal deposition track and microstructure formation

    Ahsan, M. N. & Pinkerton, A. J., 07/2011, In: Modelling and Simulation in Materials Science and Engineering. 19, 5, p. - 22 p., 055003.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  29. Published

    Microcomputed tomography analysis of intralayer porosity generation in laser direct metal deposition and its causes

    Ahsan, M. N., Bradley, R. & Pinkerton, A. J., 05/2011, In: Journal of Laser Applications. 23, 2, p. - 10 p., 022009.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  30. Published

    Porous structures fabrication by continuous and pulsed laser metal deposition for biomedical applications; modelling and experimental investigation

    Ahsan, M. N., Paul, C. P., Kukreja, L. M. & Pinkerton, A. J., 1/04/2011, In: Journal of Materials Processing Technology. 211, 4, p. 602-609 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  31. Published

    Residual stresses in laser direct metal deposited Waspaloy

    Moat, R. J., Pinkerton, A. J., Li, L., Withers, P. J. & Preuss, M., 15/03/2011, In: Materials Science and Engineering: A. 528, 6, p. 2288-2298 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  32. Published

    Fibre laser welding of dissimilar alloys of Ti-6Al-4V and Inconel 718 for aerospace applications

    Chen, H-C., Pinkerton, A. J. & Li, L., 02/2011, In: International Journal of Advanced Manufacturing Technology. 52, 9-12, p. 977-987 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  33. Published

    Gap-free fibre laser welding of Zn-coated steel on Al alloy for light-weight automotive applications

    Chen, H-C., Pinkerton, A. J., Li, L., Liu, Z. & Mistry, A. T., 02/2011, In: Materials and Design. 32, 2, p. 495-504 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  34. Published

    Innovative reconsolidation of carbon steel machining swarf by laser metal deposition

    Mahmood, K., Syed, W. U. H. & Pinkerton, A. J., 02/2011, In: Optics and Lasers in Engineering. 49, 2, p. 240-247 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  35. Published

    A CFD model of laser cladding: From deposition head to melt pool dynamics

    Ibarra-Medina, J., Vogel, M. & Pinkerton, A. J., 2011, Proceedings of the 30th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 378-386 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  36. Published

    An integrated model of laser clad formation using CFD and FE methods

    Vogel, M., Ibarra-Medina, J., N'Dri, N. & Pinkerton, A. J., 2011, Surface modification technologies XXV : Proceedings of the 25th International Conference on Surface Modification Technologies. Sudarshan, T. S. & Nylen, P. (eds.). India: Valardocs

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  37. Published

    Laser metal deposition of steel components using machining waste as build material

    Mahmood, K., Khan, A. & Pinkerton, A. J., 2011, Proceedings of CLEO, the IEEE Conference on Lasers and Electro-Optics. New York: IEEE, p. - 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  38. Published

    Laser surface cladding of Inconel 617 chips on mild steel

    Mahmood, K., Pinkerton, A. J. & Syed, W. U. H., 2011, Proceedings of the 25th International Conference on Surface Modification Technologies. Sudarshan, T. S. (ed.). Valardocs

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  39. Published

    Material-efficient laser cladding for corrosion resistance

    Mahmood, K., Stevens, N., Syed, W. U. H. & Pinkerton, A. J., 2011, Proceedings of the 30th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 695-704 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  40. 2010
  41. Published

    A CFD model of the laser, coaxial powder stream and substrate interaction in laser cladding

    Ibarra-Medina, J. & Pinkerton, A. J., 2010, In: Physics Procedia. 5, B, p. 337-346 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  42. Published

    A numerical investigation of powder heating in coaxial laser direct metal deposition

    Ibarra-Medina, J. & Pinkerton, A. J., 2010, Proceedings of the 36th International Matador Conference. Hinduja, S. & Li, L. (eds.). London: Springer, p. 455-458 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  43. Published

    An iterative, energy-mass balance model for laser metal deposition

    Ahsan, M. N., Wang, W. & Pinkerton, A. J., 2010, Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 149-158 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  44. Published

    Effects of Melt Pool Variables and Process Parameters in Laser Direct Metal Deposition of Aerospace Alloys

    Shah, K., Pinkerton, A. J., Salman, A. & Li, L., 2010, In: Materials and Manufacturing Processes. 25, 12, p. 1372-1380 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  45. Published

    Influence of melt pool convection on residual stress induced in laser cladding and powder deposition

    Kamara, A. M., Wang, W., Marimuthu, S., Pinkerton, A. J. & Li, L., 2010, Proceedings of the 4th Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  46. Published

    Laser direct deposition of carbon steel machining waste

    Mahmood, K., Syed, W. U. H. & Pinkerton, A. J., 2010, Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 1533-1540 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  47. Published

    Laser direct metal deposition: theory and applications in manufacturing and maintenance

    Pinkerton, A. J., 2010, Advances in laser materials processing : technology, research and applications. Lawrence, J. (ed.). Oxford: Woodhead Publishing Limited

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  48. Published

    Net shape laser butt welding of mild steel sheets

    Eghlio, R. M., Pinkerton, A. J. & Li, L., 2010, Proceedings of the 36th International Matador Conference. Hinduja, S. & Li, L. (eds.). London: Springer, p. 267-270 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  49. Published

    Process characteristics of single mode fibre laser net shape welding

    Eghlio, R. M., Pinkerton, A. J., Sezer, H. K. & Li, L., 2010, Proceedings of the 4th Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  50. Published

    Selective laser sintering of calcium polyphosphate - Polyvinyl alcohol for biomedical applications

    Shanjani, Y., Pinkerton, A. J. & Toyserkani, E., 2010, Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 489-494 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  51. Published

    The effect of beam geometry on diode laser forming of sheet metals

    Jamil, M. S. C., Pinkerton, A. J., Li, L. & Sheikh, M. A., 2010, Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 495-502 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  52. Published

    The effect of continuous and pulsed beam modes on cut path deviation in diode laser cutting of glass

    Nisar, S., Li, L., Sheikh, M. A. & Pinkerton, A. J., 2010, In: International Journal of Advanced Manufacturing Technology. 49, 1-4, p. 167-175 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  53. Published

    The effect of laser beam geometry on cut path deviation in diode laser chip-free cutting of glass

    Nisar, S., Sheikh, M. A., Li, L., Pinkerton, A. J. & Safdar, S., 2010, In: Journal of Manufacturing Science and Engineering. 132, 1, 9 p., 011002.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  54. Published

    The influence of powder stream shape and substrate position on mass addition in laser cladding

    Ibarra-Medina, J. & Pinkerton, A. J., 2010, Proceedings of the 24th International Conference on Surface Modification Technologies. Sudarshan, T. S. (ed.). Valardocs

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  55. Published

    X-ray analysis of pore formation in direct metal deposition and its causes

    Ahsan, M. N., Bradley, R. & Pinkerton, A. J., 2010, Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 159-165 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  56. 2009
  57. Published

    Laser and electron beams - evolving tools for surface engineering

    Pinkerton, A. J., 04/2009, In: Surface Engineering. 25, 3, p. 177-179 3 p.

    Research output: Contribution to Journal/MagazineEditorialpeer-review

  58. Published

    Crystallographic texture and microstructure of pulsed diode laser-deposited Waspaloy

    Moat, R. J., Pinkerton, A. J., Li, L., Withers, P. J. & Preuss, M., 02/2009, In: Acta Metallurgica et Materialia. 57, 4, p. 1220-1229 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  59. Published

    A comparison of cut path deviation with continuous and pulsed beam modes in diode laser chip-free cutting of glass

    Nisar, S., Li, L., Sheikh, M. A. & Pinkerton, A. J., 2009, Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 1070-1079 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  60. Published

    A method and model for deposition of TI-6Al-4V with controlled porosity

    Ahsan, M. N. & Pinkerton, A. J., 2009, Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 462-471 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  61. Published

    Coaxial laser cladding gas flows and their effects

    Ibarra-Medina, J., Pinkerton, A. J. & Paul, C. P., 2009, Proceedings of the 23rd International Conference on Surface Modification Technologies. Sudarshan, T. S. (ed.). Valardocs

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  62. Published

    Fibre laser net-shape welding of steels

    Eghlio, R. M., Pinkerton, A. J. & Li, L., 2009, Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 1402-1408 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  63. Published

    Fibre laser welding of Zn-coated steel in Al alloy for next generation lightweight vehicles

    Chen, H-C., Pinkerton, A. J., Li, L. & Mistry, A. T., 2009, Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. Paper P104

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  64. Published

    Oxide formation in acute laser percussion drilled holes in single crystal nickel superalloy

    Leigh, S., Sezer, K., Li, L., Pinkerton, A. J., Grafton-Reed, C. & Cuttell, M., 2009, Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 719-728 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  65. Published

    Porous surface structures by continuous and pulsed laser metal deposition for biomedical applications

    Pinkerton, A. J., Ahsan, M. N., Paul, C. P. & Kukreja, L. M., 2009, Proceedings of the 23rd International Conference on Surface Modification Technologies. Sudarshan, T. S. (ed.). Valardocs

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  66. Published

    The significance of melt pool variables in laser direct deposition of functionally graded aerospace alloys

    Shah, K., Salman, A., Pinkerton, A. J. & Li, L., 2009, Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 569-576 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  67. 2008
  68. Published

    Femtosecond laser micromachining of fibre Bragg gratings for simultaneous measurement of temperature and concentration of liquids

    Alemohammad, H., Toyserkani, E. & Pinkerton, A. J., 21/09/2008, In: Journal of Physics D: Applied Physics. 41, 18, p. - 9 p., 185101.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  69. Published

    Component repair using laser direct metal deposition

    Pinkerton, A. J., Wang, W. & Li, L., 07/2008, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 222, 7, p. 827-836 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  70. Published

    Laser surface colouring of titanium for contemporary jewellery

    O'Hana, S., Pinkerton, A. J., Shoba, K., Gale, A. W. & Li, L., 03/2008, In: Surface Engineering. 24, 2, p. 147-153 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  71. Published

    A comparative study of single mode fibre laser and Nd:YAG laser welding of Ti-6Al-4V

    Chen, H-C., Blackburn, J., Pinkerton, A. J., Li, L. & Hilton, P., 2008, Proceedings of the 3rd Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America, p. 163-168 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  72. Published

    A gas-free powder delivery system for 100% deposition efficiency in Direct Laser Deposition

    Wang, W., Pinkerton, A. J. & Li, L., 2008, Proceedings of the 27th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 415-423 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  73. Published

    Direct diode laser deposition of functionally graded Ti-6AL-4V and inconel 718 components

    Shah, K., Pinkerton, A. J., Moat, R., Li, L. & Preuss, M., 2008, Proceedings of the 3rd Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America, p. 273-278 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  74. Published

    Direct laser deposited titanium with controlled porosity for bone tissue engineering

    Pinkerton, A. J., Paul, C. P., Iravani-Tabrizipoor, M., Kukreja, L. M. & Khajepour, A., 2008, Proceedings of the 27th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 421-430 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  75. Published

    Single mode fibre laser welding of dissimilar aerospace alloys

    Chen, H-C., Pinkerton, A. J. & Li, L., 2008, Proceedings of the 3rd Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America, p. 505-510 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  76. Published

    Three dimensional analytical and finite element methods for simulating a moving melt pool with mass addition

    Pinkerton, A. J., Kamara, A. M., Shah, K., Safdar, S. & Li, L., 2008, Proceedings of the 3rd Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America, p. 369-374 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  77. 2007
  78. Published

    Theoretical analysis of the coincident wire-powder laser deposition process

    Pinkerton, A. J., Syed, W. U. H. & Li, L., 12/2007, In: Journal of Manufacturing Science and Engineering. 129, 6, p. 1019-1027 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  79. Published

    Single-step laser deposition of functionally graded coating by dual 'wire-powder' or 'powder-powder' feeding: a comparative study

    Syed, W. U. H., Pinkerton, A. J., Liu, Z. & Li, L., 31/07/2007, In: Applied Surface Science. 253, 19, p. 7926-7931 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  80. Published

    Coincident wire and powder deposition by laser to form compositionally graded material

    Syed, W. U. H., Pinkerton, A. J., Liu, Z. & Li, L., 21/05/2007, In: Surface and Coatings Technology. 201, 16-17, p. 7083-7091 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  81. Published

    A method and model for pulsed laser cleaning of rapid manufactured parts

    Pinkerton, A. J. & Li, K., 2007, Proceedings of the 21st International Conference on Surface Modification Technologies. Sudarshan, T. S. & Jeandin, M. (eds.). ASM International

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  82. Published

    A verified model of laser direct metal deposition using an analytical enthalpy balance method

    Pinkerton, A. J., Moat, R., Shah, K., Li, L., Preuss, M. & Withers, P. J., 2007, Proceedings of the 26th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  83. Published

    An analytical model of beam attenuation and powder heating during coaxial laser direct metal deposition

    Pinkerton, A. J., 2007, In: Journal of Physics D: Applied Physics. 40, 23, p. 7323-7334 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  84. Published

    An anisotropic enhanced thermal conductivity approach for modelling laser melt pools

    Safdar, S., Pinkerton, A. J., Moat, R., Li, L., Sheikh, M. A., Preuss, M. & Withers, P. J., 2007, Proceedings of the 26th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  85. Published

    Component repair using laser direct metal deposition

    Wang, W., Pinkerton, A. J., Wee, L. M. & Li, L., 2007, Proceedings of the 35th International MATADOR Conference. Hinduja, S. & Fan, KC. (eds.). London: Springer Verlag, p. 345-350 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  86. Published

    From art to engineering

    O'Hana, S., Pinkerton, A. J. & Shoba, K., 2007, Proceedings of the 21st International Conference on Surface Modification Technologies. Sudarshan, T. S. & Jeandin, M. (eds.). ASM International

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  87. Published

    Intragranular precipitation variations in laser deposited Waspaloy due to compositional inhomogeneities

    Moat, R. J., Karadge, M., Pinkerton, A. J., Deschamps, A., Bley, F., Li, L., Withers, P. J. & Preuss, M., 2007, Proceedings of the 136th TMS Annual Meeting. The Minerals, Metals & Materials Society (TMS), p. 77-86 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  88. Published

    Stress distributions in multilayer laser deposited Waspaloy parts measured using neutron diffraction

    Moat, R. J., Pinkerton, A. J., Hughes, D. J., Li, L., Withers, P. J. & Preuss, M., 2007, Proceedings of the 25th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  89. 2006
  90. Published

    Effect of beam angle on HAZ, recast and oxide layer characteristics in laser drilling of TBC nickel superalloys

    Sezer, H. K., Li, L., Schmidt, M., Pinkerton, A. J., Anderson, B. & Williams, P., 12/2006, In: International Journal of Machine Tools and Manufacture. 46, 15, p. 1972-1982 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  91. Published

    Thermal and microstructural aspects of the laser direct metal deposition of waspaloy

    Pinkerton, A. J., Karadge, M., Syed, W. U. H. & Li, L., 08/2006, In: Journal of Laser Applications. 18, 3, p. 216-226 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  92. Published

    Combining wire and coaxial powder feeding in laser direct metal deposition for rapid prototyping

    Syed, W. U. H., Pinkerton, A. J. & Li, L., 30/04/2006, In: Applied Surface Science. 252, 13, p. 4803-4808 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  93. Published

    Simultaneous wire- and powder-feed direct metal deposition: An investigation of the process characteristics and comparison with single-feed methods

    Syed, W. U. H., Pinkerton, A. J. & Li, L., 02/2006, In: Journal of Laser Applications. 18, 1, p. 65-72 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  94. Published

    An analytical model of the combined powder-wire deposition process

    Pinkerton, A. J., Syed, W. U. H. & Li, L., 2006, Proceedings of the 25th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  95. Published

    An experimental and theoretical investigation of combined gas- and water-atomized powder deposition with a diode laser

    Pinkerton, A. J., Syed, W. U. H. & Li, L., 2006, In: Journal of Laser Applications. 18, 1, p. 73-80 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  96. Published

    Diode laser metal deposition: The effect of pulsed beam parameters on superalloy microstructure and deposit morphology

    Pinkerton, A. J., Moat, R. J., Li, L., Preuss, M. & Withers, P., 2006, Proceedings of the 25th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  97. Published

    Rapid additive manufacturing of functionally graded structures using simultaneous wire and powder laser deposition

    Li, L., Syed, W. U. H. & Pinkerton, A. J., 2006, In: Virtual and Physical Prototyping. 1, 4, p. 217-225 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  98. Published

    The effect of powder recycling in direct metal laser deposition on powder and manufactured part characteristics

    Carroll, P. A., Pinkerton, A. J., Allen, J., Syed, W. U. H., Sezer, H. K., Brown, P., Ng, G., Scudamore, R. & Li, L., 2006, Proceedings of AVT-139 Specialists Meeting on Cost Effective Manufacture via Net Shape Processing. NATO Research and Technology Organisation

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  99. 2005
  100. Published

    Mechanical and electrochemical properties of multiple-layer diode laser cladding of 316L stainless steel

    Majumdar, J. D., Pinkerton, A. J., Liu, Z., Manna, I. & Li, L., 15/07/2005, In: Applied Surface Science. 247, 1-4, p. 373-377 5 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  101. Published

    Microstructure characterisation and process optimization of laser assisted rapid fabrication of 316L stainless steel

    Majumdar, J. D., Pinkerton, A. J., Liu, Z., Manna, I. & Li, L., 15/07/2005, In: Applied Surface Science. 247, 1-4, p. 320-327 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  102. Published

    Multiple-layer laser deposition of steel components using gas- and water-atomised powders: the differences and the mechanisms leading to them

    Pinkerton, A. J. & Li, L., 15/07/2005, In: Applied Surface Science. 247, 1-4, p. 175-181 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  103. Published

    A comparative study of wire feeding and powder feeding in direct diode laser deposition for rapid prototyping

    Syed, W. U. H., Pinkerton, A. J. & Li, L., 2005, In: Applied Surface Science. 247, 1-4, p. 268-276 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  104. Published

    Alternative nozzle and metal delivery methods for laser-assisted metal deposition: (invited paper & presentation)

    Pinkerton, A. J., 2005.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  105. Published

    An experimental and numerical study of the influence of diode laser beam shape on thin wall direct metal deposition

    Pinkerton, A. J. & Li, L., 2005, In: Journal of Laser Applications. 17, 1, p. 47-56 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  106. Published

    An investigation into delamination mechanisms in inclined laser drilling of thermal barrier coated aerospace superalloys

    Sezer, H. K., Pinkerton, A. J., Li, L. & Byrd, P., 2005, In: Journal of Laser Applications. 17, 4, p. 225-234 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  107. Published

    Direct additive laser manufacturing using gas- and water-atomised H13 tool steel powders

    Pinkerton, A. J. & Li, L., 2005, In: International Journal of Advanced Manufacturing Technology. 25, 5-6, p. 471-479 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  108. Published

    Explaining microstructural and physical variations in rapid additive manufactured waspaloy parts through the laser-deposition thermal cycle

    Pinkerton, A. J., Syed, W. U. H., Karadge, M. & Li, L., 2005, Proceedings of the 24th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 822-831 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  109. Published

    Single-step graded surface coating using combined wire and powder feeding laser cladding

    Syed, W. U. H., Pinkerton, A. J., Liu, Z. & Li, L., 2005, Proceedings of the 24th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 787-795 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  110. Published

    Statistical analysis of the effect of processing conditions on powder catchment efficiency in the Direct Laser Deposition (DLD) process

    Syed, W. U. H., Pinkerton, A. J., Li, L., Al-Eid, E. & Pan, J., 2005, Virtual modeling and rapid manufacturing: advanced research in virtual and rapid prototyping. Bartolo, P. J., Mateus, A. J., Batista, F. C., Almeida, H. A., Vasco, J. C., Correia, M. A., Alves, N. F., Andre, N. C., Novo, P. P., Lima, P., Custodio, P. C., Martinho, P. G. & Carvolho, R. A. (eds.). London: Taylor and Francis, p. 361-367 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  111. Published

    The effect of process parameters on residual stresses within an inconel 718 part produced by the Direct Laser Deposition process

    Pinkerton, A. J., Shackleton, J., Moat, R., Li, L., Withers, P., Preuss, M., Allen, J., Hilton, P. & Folwell, R., 2005, Proceedings of the 24th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 601-610 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  112. 2004
  113. Published

    Modelling the geometry of a moving laser melt pool and deposition track via energy and mass balances

    Pinkerton, A. J. & Li, L., 21/07/2004, In: Journal of Physics D: Applied Physics. 37, 14, p. 1885-1895 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  114. Published

    The development of temperature fields and powder flow during laser direct metal deposition wall growth

    Pinkerton, A. J. & Li, L., 05/2004, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 218, 5, p. 531-541 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

Previous 1 2 Next

Back to top