Manufacturing

View graph of relations

151 - 200 out of 1,001Page size: 50

RSS feed of this list

Sort by: Type

Conference contribution/Paper
Published
Multi-scale modelling of damage progression in FRC laminates - Applications of DEM
Yang, D., Sheng, Y., Ye, J. & Tan, Y., 2011, Particle-Based Methods II: Fundamentals and Applications. Onate, E. & Owen, D. R. J. (eds.). Barcelona: International Center for Numerical Methods in Engineering (CIMNE), p. 256-263 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Effects of Shear Connector's Position in Profiled Sheeting on Strength and Ductility.
Lam, D., Qureshi, J. & Ye, J., 2011, 5th International Conference on Steel & Composite Structures, Seoul, Korea..
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Realistic Modeling of High Rise Structures subjected to Progressive Collapse
Stephen, D., Ye, J. & Lam, D., 2011, The Thirteenth International Conference on Civil, Structural and Environmental Engineering Computing, Crete, Greece..
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Finite Element Modelling of Slender Concrete Filled Elliptical Steel Columns
Lam, D., Dai, X., Ye, J. & Jamaluddin, N., 2011, EUROSTEEL 2011, Budapest, Hungary. .
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Buckling behaviour of concrete- filled elliptical steel columns
Lam, D., Dai, X., Jamaluddin, N. & Ye, J., 2011, 7th International Conference on Steel & Aluminium Structures (ICSAS2011), Kuching, Sarawak, Malaysia. Ho, L. H. (ed.).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Laser metal deposition of steel components using machining waste as build material
Mahmood, K., Khan, A. & Pinkerton, A. J., 2011, Proceedings of CLEO, the IEEE Conference on Lasers and Electro-Optics. New York: IEEE, p. - 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Laser surface cladding of Inconel 617 chips on mild steel
Mahmood, K., Pinkerton, A. J. & Syed, W. U. H., 2011, Proceedings of the 25th International Conference on Surface Modification Technologies. Sudarshan, T. S. (ed.). Valardocs
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Material-efficient laser cladding for corrosion resistance
Mahmood, K., Stevens, N., Syed, W. U. H. & Pinkerton, A. J., 2011, Proceedings of the 30th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 695-704 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A CFD model of laser cladding: From deposition head to melt pool dynamics
Ibarra-Medina, J., Vogel, M. & Pinkerton, A. J., 2011, Proceedings of the 30th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 378-386 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
An integrated model of laser clad formation using CFD and FE methods
Vogel, M., Ibarra-Medina, J., N'Dri, N. & Pinkerton, A. J., 2011, Surface modification technologies XXV : Proceedings of the 25th International Conference on Surface Modification Technologies. Sudarshan, T. S. & Nylen, P. (eds.). India: Valardocs
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Product Optimization by Rapid Manufacturing and Targeted Functional Analysis
Lupeanu, M., Rennie, A., Neagu, C. & Celik, K., 2011, 16th European Forum on Rapid Prototyping and Manufacturing: Proceedings of the. 14 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Effect of build orientation on FDM parts: a case study for validation of deformation behaviour by FEA
Hambali, R. H., Celik, K., Smith, P., Rennie, A. & Ucar, M., 09/2010, International Conference on Design and Concurrent Engineering (iDECON 2010): Manufacturing Challenges Towards Global Sustainability. Penerbit Universiti (UTeM), p. 224-228 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Skills development of employees at SMEs in the construction sector in the North of England
Ganah, A. & Rennie, A., 09/2010, The Construction, Building and Real Estate Research Conference of the Royal Institution of Chartered Surveyors (COBRA 2010): Proceedings of. Royal Institution of Chartered Surveyors (RICS), 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Placing postgraduate research students at the heart of knowledge exchange: benefits for academia and industry
Lambert, C. & Rennie, A., 1/07/2010, Proceedings of the 3rd International Symposium for Engineering Education (ISEE2010): educating engineers for a changing world : leading transformation from an unsustainable global society. p. 485-493 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Using additive manufacturing effectively: a CAD tool to support decision making
Smith, P. & Rennie, A., 07/2010, 36th International MATADOR Conference. Hinduja, S. & Li, L. (eds.). Springer-Verlag, p. 381-384 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A comparison of carbon footprint calculations for end of life product recovery methods using PAS 2050
Appleby, M., Lambert, C., Rennie, A. & Buckley, A., 07/2010, Proceedings of the ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis: (ESDA 2010). ASME, 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Computer Aided Material Selection (CAMS) for Additive Manufacturing Materials
Smith, P. & Rennie, A., 06/2010, 11th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Jacobson, D., Rennie, A. & Bocking, C. (eds.). High Wycombe: CRDM Ltd, p. 55-61 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Discrete Element Method Simulation of the Damage Evolution in Cross-Ply Laminate under Tensile Loading
Yang, D., Ye, J., Tan, Y. Q. & Sheng, Y., 2010, The Tenth International Conference on Computational Structures Technology. Topping, B. H. V., Adam, J. M., Pallares, F. J., Bru, R. & Romero, M. L. (eds.). Stirling: Civil-Comp press
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Experimental studies of elliptical concrete-filled tube columns
Jamaluddin, N., Lam, D. & Ye, J., 2010, TUBULAR STRUCTURES XIII. Young, B. (ed.). BOCA RATON: CRC PRESS-TAYLOR & FRANCIS GROUP, p. 333-340 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Composite Behaviour of Headed Stud Shear Connectors in Pairs with Profiled Metal Deck Flooring
Lam, D., Ye, J. & Qureshi, J., 2010, 4th International Conference on Steel & Composite Structures.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
X-ray analysis of pore formation in direct metal deposition and its causes
Ahsan, M. N., Bradley, R. & Pinkerton, A. J., 2010, Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 159-165 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A numerical investigation of powder heating in coaxial laser direct metal deposition
Ibarra-Medina, J. & Pinkerton, A. J., 2010, Proceedings of the 36th International Matador Conference. Hinduja, S. & Li, L. (eds.). London: Springer, p. 455-458 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The effect of beam geometry on diode laser forming of sheet metals
Jamil, M. S. C., Pinkerton, A. J., Li, L. & Sheikh, M. A., 2010, Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 495-502 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Selective laser sintering of calcium polyphosphate - Polyvinyl alcohol for biomedical applications
Shanjani, Y., Pinkerton, A. J. & Toyserkani, E., 2010, Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 489-494 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Process characteristics of single mode fibre laser net shape welding
Eghlio, R. M., Pinkerton, A. J., Sezer, H. K. & Li, L., 2010, Proceedings of the 4th Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Influence of melt pool convection on residual stress induced in laser cladding and powder deposition
Kamara, A. M., Wang, W., Marimuthu, S., Pinkerton, A. J. & Li, L., 2010, Proceedings of the 4th Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Laser direct deposition of carbon steel machining waste
Mahmood, K., Syed, W. U. H. & Pinkerton, A. J., 2010, Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 1533-1540 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
An iterative, energy-mass balance model for laser metal deposition
Ahsan, M. N., Wang, W. & Pinkerton, A. J., 2010, Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 149-158 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Net shape laser butt welding of mild steel sheets
Eghlio, R. M., Pinkerton, A. J. & Li, L., 2010, Proceedings of the 36th International Matador Conference. Hinduja, S. & Li, L. (eds.). London: Springer, p. 267-270 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The influence of powder stream shape and substrate position on mass addition in laser cladding
Ibarra-Medina, J. & Pinkerton, A. J., 2010, Proceedings of the 24th International Conference on Surface Modification Technologies. Sudarshan, T. S. (ed.). Valardocs
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A Computer Aided Design (CAD) support tool for parametric design of products for Rapid Manufacture (RM)
Smith, P. & Rennie, A., 10/2009, 4th International Conference on Advanced Research in Virtual and Rapid Prototyping: Proceedings of the . Leiria, Portugal: Taylor & Francis Group, p. 95-100 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Effect of Thermal and Mechanical Deformation of Metamaterial FDM Components
Celik, H. K., Tan, Y., Seviour, R. & Rennie, A., 09/2009, US _ TURKEY Workshop on Rapid Technologies (RapidTech 2009). p. 83-88 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Barriers to training for employees at SMEs in the construction sector
Ganah, A. & Rennie, A., 07/2009, The First TG 59 International People in Construction Conference. p. 138-146 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Assistive CAD Tools: A Review of Automated Design Methods within Computer Aided Design
Smith, P. & Rennie, A., 06/2009, Rapid Design, Prototyping and Manufacturing: Proceedings of the Tenth National Conference on . Rennie, A., Bocking, C. & Jacobson, D. (eds.). High Wycombe: MJA Print, p. 17-25 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Coaxial laser cladding gas flows and their effects
Ibarra-Medina, J., Pinkerton, A. J. & Paul, C. P., 2009, Proceedings of the 23rd International Conference on Surface Modification Technologies. Sudarshan, T. S. (ed.). Valardocs
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A review of suitable methods for producing automated or semi automated product designs for production using RM technologies
Rennie, A. & Smith, P., 2009, 14th European Forum on Rapid Prototyping and Manufacturing: Proceedings of the. 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Fibre laser welding of Zn-coated steel in Al alloy for next generation lightweight vehicles
Chen, H-C., Pinkerton, A. J., Li, L. & Mistry, A. T., 2009, Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. Paper P104
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Fibre laser net-shape welding of steels
Eghlio, R. M., Pinkerton, A. J. & Li, L., 2009, Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 1402-1408 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A method and model for deposition of TI-6Al-4V with controlled porosity
Ahsan, M. N. & Pinkerton, A. J., 2009, Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 462-471 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A comparison of cut path deviation with continuous and pulsed beam modes in diode laser chip-free cutting of glass
Nisar, S., Li, L., Sheikh, M. A. & Pinkerton, A. J., 2009, Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 1070-1079 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The significance of melt pool variables in laser direct deposition of functionally graded aerospace alloys
Shah, K., Salman, A., Pinkerton, A. J. & Li, L., 2009, Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 569-576 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Oxide formation in acute laser percussion drilled holes in single crystal nickel superalloy
Leigh, S., Sezer, K., Li, L., Pinkerton, A. J., Grafton-Reed, C. & Cuttell, M., 2009, Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 719-728 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Porous surface structures by continuous and pulsed laser metal deposition for biomedical applications
Pinkerton, A. J., Ahsan, M. N., Paul, C. P. & Kukreja, L. M., 2009, Proceedings of the 23rd International Conference on Surface Modification Technologies. Sudarshan, T. S. (ed.). Valardocs
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Coefficients for Theory of Adaptive Elasticity and its use in the FEA of remodeling processes in biological tissues
Magatin, R., Ye, J. & Jin, Z., 2009, 3rd International Conference on Mechanics of Biomaterials and Tissues.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Finite Element Analysis of Elliptical Stub CFT Columns
Jamaluddin, N., Lam, D. & Ye, J., 2009, Steel Concrete Composite and Hybrid Structures. Lam, D. (ed.). Singapore: Research Publishing Services, p. 265-270 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Behaviour of Headed Shear Stud in a Push Test using Profiled Steel Sheeting
Qureshi, J., Lam, D. & Ye, J., 2009, Steel Concrete Composite and Hybrid Structures. Lam, D. (ed.). Singapore: Research Publishing Services, p. 737-744 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A Comprehensive Business Model for Rapid Manufactured Products
Hasan, S. & Rennie, A., 10/2008, 19th International Symposium of the Danube-Adria-Association-for-Automation-and-Manufacturing - Intelligent Manufacturing & Automation: Focus on Next Generation of Intelligent Systems and Solutions. Vienna: DAAAM International, p. 591-592 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Development of an Additive Layer Manufacturing business model: creating an environment to support designers from concept to distribution
Ariadi, Y., Hasan, S., Smith, P. & Rennie, A., 06/2008, Proceedings of 32nd Japan Rapid Prototyping Symposium. p. 79-84 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Initiation and propagation of transverse cracking in composite laminates
Ye, J. & Zhang, D., 2008, Third International Conference on Engineering Failure Analysis, ICEFA-III, Barcelona. Elsevier
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Analytical model of semi-rigid composite joints with steel beams and precast hollowcore slabs.
Lam, D., Ye, J. & Fu, F., 2008, Structures Congress 2007: Proceedings of the 2007 Structures Congress, Proceedings of the Research Frontiers Sessions of the 2007 Structures Congress, and Proceedings of the 2007 Forensic Engineering Track of the 2007 Structures Congress, and May 16-19, 2007, Long Beach, California. Lyons, R., Wallance, J. W. & Stovner, E. (eds.). ASCE
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Previous 1 2 3 4 5 6 7 8 ...21 Next

Research

Manufacturing

Quick Links

Connect With Us