Home > Research > Structures, Materials and Manufacturing > Publications & Outputs

Research

View graph of relations

Structures, Materials and Manufacturing

251 - 300 out of 969Page size: 50
RSS feed of this list
Sort by: Type
  1. Conference contribution/Paper
  2. Published

    On the influence of protein adsorption to phagocytosis of model polyethylene particles

    Green, S., Elfick, A. P., Birch, M. A. & McCaskie, A. W., 2002, International conference engineers & surgeons - joined at the hip : refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. L27

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  3. Published

    Study and applications of a Bounding Method in stability analysis of Stiffened composite aerospace panels

    Ye, J., 2001, Solids, structures and coupled problems in engineering : : proceedings of the 2nd European Conference on Computational Mechanics 26-29 June 2001, Cracow Poland. Waszczyszyn, Z. & Pamin, J. (eds.). Cracow: Cracow University of Technology

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  4. Published

    Electroforming of a Thermojet Master Pattern for use as an Electro-Discharge Machine Electrode

    Bocking, C., Rennie, A., Bennett, G. & Lewis, N., 10/2000, Time Compression Technologies 2000 Conference: Proceedings of. Rapid News Publications PLC, p. 151-156 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  5. Published

    Electroforming of a Stereolithography Master Pattern for use as an Electro-Discharge Machine electrode

    Rennie, A., Bocking, C. E. & Bennett, G. R., 07/2000, Proceedings of the 33rd International MATADOR Conference: Formerly The International Machine Tool Design and Research Conference. Springer-Verlag, p. 301-306 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  6. Published

    Edge effects in cross-ply laminated hollow cylindrical shells

    Ye, J. Q., 2000, Computational techniques for materials, composites and composite structures. Topping, BHV. (ed.). Edinburgh: Civil-Comp press, p. 359-363 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  7. Published

    Cytomcompatibility evaluation of surface modified Ni-Ti shape memory alloy using the MTT assay

    Green, S., Grant, D. M. & Wood, J. V., 2000, Processing and fabrication of advanced materials VIII : proceedings of a symposium ... September 8-10, 1999, Mandarin Hotel, Orchard Road, Singapore . Khor, K. A. (ed.). Singapore: World Scientific Publishing, p. 141-148 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  8. Published

    Comparative analysis of bone cement fracture surfaces

    Green, S., Liu, C., Watkins, N. D. & McCaskie, A. W., 2000, 11th International Conference on Deformation, Yield and Fracture of Polymers : 10 - 13 April 2000, Churchill College, Cambridge, UK.. Cambridge : IOM communications, p. 325-328 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  9. Published

    The dependence of recovery behaviour on mechanical properties of bone cement

    Green, S., Liu, C., Watkins, N. D., Gregg, P. J. & McCaskie, A. W., 2000, PIMS 2000 : 9th International Conference on Polymers in Medicine & Surgery, 11 - 13 September 2000, Danube University, Krems, Austria. London: IOM communications, p. 89

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  10. Published

    Non-linear FEM for RC shear wall structures

    Shen, PS., Ye, J. & Cai, SB., 1999, Developments in Analysis & Design Using FEM: 7th Int. Conf. Civil. Struct. Eng., Oxford. Topping, B. H. V. & Kumar, B. (eds.). Stirling: Civil-Comp press, p. 181-186 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  11. Published

    Interfacial effects On RC beams strengthened by bonded composite plates

    Ye, J., 1999, Proceedings of the Second Asia Pacific Specialty Conference on Fiber Reinforced Concrete . Lok, T. S. & Tseng, K. (eds.). Singapore

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  12. Published

    Decay rate of boundary effects in laminated composite cylinders and cylindrical panels.

    Ye, J., 1998, Proceedings of the 1998 ASME Engineering Systems Design and Analysis (ESDA) Conference.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  13. Published

    Development of a Continuous Droplet Generation System of Molten Metals using Electromotive Forces, with a View to its use in the Rapid Tooling Industry

    Rennie, A. & Bennett, G. R., 07/1997, Proceedings of the Thirty-Second International Manufacturing, Automation and Systems, Technology, Applications, Design, Organisation and Management, Research (MATADOR) Conference. p. 399-403 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  14. Published

    Vibration of laminated composite panels with intermediate point supports and clamped edges

    Ye, J., 1997, Proceedings of the 2nd International Symposium on Structures and Foundations in Civil Engineering. Shen, C. K., Kuang, J. S. & Ng, C. W. W. (eds.). Hong Kong: Department of Civil and Structural Engineering, The Hong Kong University of Science and Technology, p. 103-108

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  15. Published

    Axisymmetric vibration analysis of laminated hollow spheres composed of transversely isotropic layers

    Ye, J. & Soldatos, K. P., 1996, Proceedings of the 1996 Engineering Systems Design and Analysis Conference. Sabir, A. B. (ed.). American Society of Mechanical Engineers

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  16. Published

    On three-dimensional buckling analysis of orthotropic cylinders

    Soldatos, K. P. & Ye, J., 1995, Proceedings 15th Canadian Congress of Applied Mechanics CANCAM 95. Tabarrock, B. & Dost, S. (eds.).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  17. Published

    Surface performance of a Ni-Ti shape memory alloy

    Green, S., Grant, D. M. & Wood, J. V., 1995, Proceedings of SMST-94 : the First International Conference on Shape Memory and Superelastic Technologies, March 7-10, 1994, Asilomar Conference Center, Pacific Grove, California. Pelton, A. R., Hodgson, D. & Duerig, T. W. (eds.). Monterey, Calif.: Published under the aegis of the Organizing Committee of SMST-94, p. 91-96 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  18. Abstract
  19. Published

    A Short Review on 4D Printing

    Khan, F., Celik, H. K., Oral, O. & Rennie, A. E. W., 04/2018, 3rd International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry 2018. Çetinkaya, K., Özsoy, K., Duman, B. & Kayaalp, K. (eds.). Antalya, Turkey, p. 199-203 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract

  20. Published

    A numerical modeling approach of composite risers for deep waters

    Amaechi, C. V. & Ye, J., 8/09/2017, ICCS20 20th International Conference on Composite Structures. Ferreira, A. J. M., Larbi, W., Deu, J-F., Tornabene, F. & Fantuzzi, N. (eds.). Societa Editrice Esculapio, p. 262-263 2 p. (Structural and Computational Mechanics Book Series).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract

  21. Published

    Sensing platform based on laser-engineered nanocomposite glass

    Zolotovskaya, S. & Abdolvand, A., 5/09/2016, Photon16. IOP Publishing Ltd, p. 79 1 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract

  22. Published

    Prediction of thermal cracking in concrete structures reinforced with GFRP

    EL-Zaroug, O., Forth, J. & Ye, J., 06/2013, FRPRCS-11: 11th International Symposiumn on Fibre Reinforced Polymer for Reinforced Concrete Structures . Barros, J. (ed.). Elsevier

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract

  23. Published

    The absence of nanometre sized UHMWPE wear particles retrieved from ex-vivo tissue

    Green, S., Elfick, A. P. & Unsworth, A., 2001, Trans 4th Combined meeting Orthopaedic Research Societies of the USA, Europe Canada and Japan. Chicago, Ill. : Orthopaedic research society, p. 93 1 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract

  24. Published

    How size affects the mobility of THR wear debris

    Green, S., Elfick, A. P. D. & Liu, C., 2001, European Society of Biomaterials 16th Conference Proceedings, London, UK, September 2001.. London: European Society for Biomaterials, p. T41

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract

  25. Published

    Compression failure mode of two CMW bone cements

    Green, S., Liu, C., Watkins, N. D., Gregg, P. J. & McCaskie, A. W., 2001, European Society of Biomaterials 16th Conference Proceedings, London, UK, September 2001.. London: European Society for Biomaterials, p. P51

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract

  26. Conference paper
  27. Published

    Guidelines on Designing Marine Hoses for Oil/Gas Applications

    Amaechi, C. V., 28/10/2022.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  28. Published

    Mechanics, hydrodynamics and novel design of composite risers with application on offshore hoses

    Amaechi, C. V. & Ye, J., 16/04/2021.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  29. Published

    Local and Global Design of Composite Risers on Truss SPAR Platform in Deep waters

    Amaechi, C. V., Ye, J., Hou, X., Gillett, N., Odijie, A. C. & Wang, F., 3/07/2019.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  30. Published

    Numerical design of Novel Composite risers for deep water applications

    Amaechi, C. V. & Ye, J., 5/05/2018.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  31. Published

    A Numerical Modeling Approach of Composite Riser Hoses

    Amaechi, C. V. & Ye, J., 19/12/2017.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  32. Published

    Effects of Lap Thickness and Joint Geometry on Failure of Pultruded Composite Single-Lap Bolted Tension Joints

    Turvey, G. J. & Assassa, J., 5/09/2017, p. 23-28. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  33. Published

    Comparison of Galvanometer and Polygon Scanning Systems on Component Production Rates in Selective Laser Sintering

    King, B., Rennie, A. E. W. & Bennett, G. R., 27/04/2017. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  34. Published

    Time-Dependant Human Mastication Simulation of Agricultural Products and Its Rapid Prototyping Aided Evaluation: A Case Study for Pecan Kernel Mastication

    Celik, H. K., Rennie, A. E. W., Er, K., Abram, T. N. & Akinci, I., 27/04/2017. 10 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  35. Published

    Utilising Multi-Material PolyJet Additive Manufacturing for the Design and Fabrication of Prototype Flood Protection Door Seals

    Walsh, S. M. R., Rennie, A. E. W., Abram, T. N., Snape, M. & Roberts, L., 27/04/2017. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  36. Published

    Experimental investigation of recycled carpet composites for barrier structures

    Sotayo, A., Green, S. M. & Turvey, G. J., 04/2016.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  37. Published

    Pressure drop and velocity simulations in non-stochastic lattice structure for filter applications fabricated using additive manufacturing

    Hasib, H., Rennie, A. E. W., Burns, N. & Geekie, L., 12/2015. 8 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  38. Published

    Simulation of flow characteristics for filters designed with a non-stochastic lattice structure fabricated via additive manufacturing

    Hasib, H., Rennie, A. E. W., Burns, N. & Geekie, L., 12/2015, p. 153-158. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  39. Published

    Multi-material additive manufacture of multi-layer ceramic capacitors

    King, B. A. T., Rowan, B., Williams, C., Williams, L., Tubby, D., Rennie, A. E. W. & Dennison, K., 12/2015, p. 79-85. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  40. Published

    Understanding Fluid-Structure Interaction for high amplitude wave loadings on a deep-draft paired column semi-submersible platform: a finite element approach

    Odijie, C. & Ye, J., 9/11/2015.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  41. Published

    Single camera photogrammetry for reverse engineering and fabrication of ancient and modern artefacts

    Kaufman, J., Rennie, A. & Clement, M., 03/2015. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  42. Published

    Designing advanced filtration media through metal additive manufacturing

    Burns, N., Burns, M., Travis, D., Geekie, L. & Rennie, A., 02/2015. 9 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  43. Published

    Innovations in filtration through additive manufacturing: Paper: EP140165

    Burns, N., Burns, M., Travis, D., Geekie, L. & Rennie, A., 09/2014. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  44. Published

    Improved filtration using additive manufacturing

    Burns, N., Geekie, L., Travis, D., Burns, M., Weston, D. P. & Rennie, A., 07/2014.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  45. Published

    Single- and double-lap bolted joints in pultruded composite plate

    Turvey, G., 2014.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  46. Published

    Introducing functionality to filter media

    Vijayakumar, B., Rennie, A., Burns, N., Burns, M., Travis, D. & Battersby, P., 6/11/2013. 10 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  47. Published

    Using additive manufacturing to build energy efficient filter supports

    Vijayakumar, B., Rennie, A., Burns, N., Burns, M., Travis, D. & Battersby, P., 10/2013. 9 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  48. Published

    Design of a reconfigurable platform for navigation signal simulation

    Ming, D., Zhong, X., Ma, X. & Liu, L., 2013.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  49. Published

    Functional analysis for the development of bio-medical products

    Lupeanu, M., Neagu, C., Opran, C. & Rennie, A., 10/2012, p. 330-336. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  50. Published

    An experimental investigation of the tensile behaviour of single-lap bolted joints in pultruded GFRP plate

    Turvey, G. & Gode, J., 13/09/2012. 15 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  51. Published

    Optimal sensor selection for wind turbine condition monitoring using multivariate principal component analysis approach

    Wang, Y., Ma, X. & Joyce, M., 09/2012. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  52. Published

    Generic model of a community-based microgrid integrating wind turbines and photovoltaics

    Ma, X., Qin, J. & Wang, Y., 07/2012, p. 3147-3153. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  53. Published

    Failure of single-lap single-bolt tension joints in pultruded glass fibre reinforced plate

    Turvey, G., 13/06/2012. 8 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

Previous 12 3 4 5 6 7 8 9 ...20 Next

Back to top