Manufacturing

View graph of relations

801 - 900 out of 1,001Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Publication date

2003
Published
Electroforming for Injection Moulding
Rennie, A. & Bocking, C., 20/06/2003, Rapid and Virtual Prototyping and Applications: Proc. Fourth National Conference on (Incorporating RAPTIA (Rapid Prototyping and Tooling - Industrial Applications) State-of-the-Art Reports). Bocking, C., Rennie, A. & Jacobson, D. (eds.). Professional Engineering Publishing, p. 239-248
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Reactive distillation-pervaporation hybrid column for tert-amyl alcohol etherification with ethanol
Aiouache, F. & Goto, S., 06/2003, In: Chemical Engineering Science. 58, 12, p. 2465-2477 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Sorption effect on kinetics of etherification of tert-amyl alcohol and ethanol
Aiouache, F. & Goto, S., 05/2003, In: Chemical Engineering Science. 58, 10, p. 2065-2077 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The nature and dissemination of UHMWPE wear debris retrieved from periprosthetic tissue of THR.
Elfick, A. P. D., Green, S. M., Krikler, S. & Unsworth, A., 1/04/2003, In: Journal of Biomedical Materials Research Part A. 65, 1, p. 95-108 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The effect of laser pulse width on multiple-layer 316L steel clad microstructure and surface finish
Pinkerton, A. J. & Li, L., 15/03/2003, In: Applied Surface Science. 208-209, p. 411-416 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Open-hole tension strength of pultruded GRP plate.
Turvey, G. & Wang, P., 1/02/2003, In: Proceedings of the ICE - Structures and Buildings. 156, 1, p. 93-101 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A preliminary hip joint simulator study of the migration of a cemented femoral stem
Liu, C., Green, S. M., Watkins, N. D., Gregg, P. J. & McCaskie, A. W., 02/2003, In: Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 217, 2, p. 127-135 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Strength and fracture resistance of FRP reinforced concrete flexural members
Wu, Z. J. & Ye, J. Q., 02/2003, In: Cement and Concrete Composites. 25, 2, p. 253-261 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
DOES THE CLINICAL ENVIRONMENT INFLUENCE THE PROPERTIES OF BONE CEMENT?
Burt, N., Green, S. M., Sandher, D. S. & Gregg, P. J., 1/01/2003, In: Journal of Bone and Joint Surgery, British Volume. 85-B, SUPP I, p. 13-14 2 p.
Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review
Published
A three-dimensional state space finite element solution for laminated composite cylindrical shells
Sheng, H. Y. & Ye, J. Q., 2003, In: Computer Methods in Applied Mechanics and Engineering. 192, 22-24, p. 2441-2459 19 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An investigation of the effect of pulse frequency in laser multiple-layer cladding of stainless steel
Pinkerton, A. J. & Li, L., 2003, In: Applied Surface Science. 208-209, p. 405-410 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Annular sector plates: comparison of full-section and layer yield predictions.
Turvey, G. J. & Salehi, M., 2003, Proceedings of the 9th international conference on civil and structural engineering computing. p. 89-90 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Combined finite strip and beam elements for double tee slabs
Abou Ghadeer, M., Ye, J. & Mansouri, A. H., 2003, Proceedings of the Ninth International Conference on Civil and Structural Engineering Computing: Egmond-aan-Zee, the Netherlands, 2-4 September 2003 . Topping, B. H. V. (ed.). Stirling: Civil-Comp Press
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Direct metal deposition by diode laser: modelling the effect of increased beam coupling
Pinkerton, A. J. & Li, L., 2003, Proceedings of the 22nd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Effects of powder geometry and composition in coaxial laser deposition of 316L steel for rapid prototyping
Pinkerton, A. J. & Li, L., 2003, In: CIRP Annals - Manufacturing Technology. 52, 1, p. 181-184 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Interactions between strip and beam elements of a hollow block slab system
Abou Ghadeer, M., Ye, J. Q. & Mansouri, A. H., 2003, Computational Fluid and Solid Mechanics 2003, Vols 1 and 2, Proceedings. Bathe, K. J. (ed.). Amsterdam: ELSEVIER SCIENCE PUBL B V, p. 42-46 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Laminated composite plates and shells: 3D modelling
Ye, J., 2003, London: Springer-Verlag. 273 p.
Research output: Book/Report/Proceedings › Book
Published
Modelling the temperature effects of melt pool position and wall height in additive manufacturing by direct laser deposition
Pinkerton, A. J. & Li, L., 2003, Proceedings of the 1st International Conference on Advanced Research in Virtual and Rapid Prototyping. Bartolo, P. J., Mitchell, G., Mateus, A., Batista, F., Vasco, J., Correia, M., Andre, N., Lima, P., Novo, P., Custodio, P. & Martinho, P. (eds.). Leiria: Escola Superior Tecnologia Gestao Leiria, p. 224-231 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
N+ ion implantation of Ti6Al4V alloy and UHMWPE for total joint replacement application.
Boampong, D. K., Green, S. M. & Unsworth, A., 2003, In: Journal of Applied Biomaterials and Biomechanics. 1, p. 164-171 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rapid and virtual prototyping and applications: Proceedings of the Fourth National Conference on (Incorporating RAPTIA (Rapid Prototyping and Tooling - Industrial Applications) State-of-the-Art Reports
Bocking, C. E. (Editor), Rennie, A. (Editor) & Jacobson, D. M. (Editor), 2003, Professional Engineering Publishing. 330 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid prototyping using direct laser deposition - the effect of powder atomization type and flowrate
Pinkerton, A. J. & Li, L., 2003, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 217, 6, p. 741-752 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Tearing failure of web-flange junctions in pultruded GRP profiles.
Turvey, G. J. & Zhang, Y., 2003, Proceedings of the DFC-7 conference on deformation and fracture of composites.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
The effect of diode laser beam shape and traverse direction on the direct metal deposition process
Pinkerton, A. J. & Li, L., 2003, Proceedings of the 22nd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
2002
Published
The influence of opsonins on cellular reaction to polyethylene wear particles
Elfick, A., Birch, M., Green, S. & McCaskie, A., 1/12/2002, In: European Cells and Materials. 4, SUPPL. 2, 1 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Creep behavior comparison of CMW1 and palacos R-40 clinical bone cements
Liu, C., Green, S. M., Watkins, N. D., Gregg, P. J., McCaskie, A. W. & Mccaskie, A. W., 11/2002, In: Journal of Materials Science: Materials in Medicine. 13, 11, p. 1021-1028 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A re-appraisal of wear features of acetabular sockets using atomic force microscopy.
Elfick, A. P. D., Smith, S. L., Green, S. M. & Unsworth, A., 10/2002, In: Wear. 253, 7-8, p. 839-847 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effects of operating parameters on the lubricated wear behavior of a PA-6/UHMWPE blend: a statistical analysis.
Liu, C. Z., Ren, L. Q., Tong, J., Green, S. M. & Arnell, R. D., 10/2002, In: Wear. 253, 7-8, p. 878-884 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A state space finite element for laminated composite plates
Sheng, H. Y. & Ye, J. Q., 16/08/2002, In: Computer Methods in Applied Mechanics and Engineering. 191, 37-38, p. 4259-4276 18 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Wavelets for the analysis and compression of partial discharge data.
Ma, X., Zhou, C. & Kemp, I. J., 7/08/2002, Conference on Electrical Insulation and Dielectric Phenomena, 2001 Annual Report.. IEEE, p. 329-334 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
DSP based partial discharge characterisation by wavelet analysis.
Ma, X., Zhou, C. & Kemp, I. J., 6/08/2002, Proceedings. ISDEIV. XIXth International Symposium on Discharges and Electrical Insulation in Vacuum, 2000.. IEEE, Vol. 2. p. 780 -783
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Investigation into the use of wavelet theory for partial discharge pulse extraction in electrically noisy environments.
Ma, X., Zhou, C. & Kemp, I. J., 6/08/2002, Dielectric Materials, Measurements and Applications, 2000. Eighth International Conference on (IEE Conf. Publ. No. 473). IEE, p. 123-126 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
PD pulse propagation studies using the wavelet transform.
Ma, X., Zhou, C. & Kemp, I. J., 6/08/2002, Electrical Insulation and Dielectric Phenomena, 2000 Annual Report Conference on. IEEE, Vol. 2. p. 626 -629
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A semi-analytical finite element for laminated composite plates
Sheng, H. Y. & Ye, J. Q., 07/2002, In: Composite Structures. 57, 1-4, p. 117-123 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of restraint on the creep behavior of clinical bone cement
Liu, C., Green, S. M., Watkins, N. D., Gregg, P. J. & McCaskie, A. W., 15/06/2002, In: Journal of Materials Science Letters. 21, 12, p. 959-962 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Injection mould tool manufacture in less than five days
Jacobson, D., Bocking, C. & Rennie, A. E. W., 1/06/2002, 9 p. Society of Manufacturing Engineers.
Research output: Other contribution
Published
Interpretation of wavelet analysis and its application in partial discharge detection.
Ma, X., Zhou, C. & Kemp, I. J., 06/2002, In: IEEE Transactions on Dielectrics and Electrical Insulation. 9, 3, p. 446-457 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The Fabrication of Electronic Packages from High Silicon Aluminium Alloys Using Thin Shell Electroformed (TSE) EDM Electrodes
Rennie, A. E. W., Bennett, G., Bocking, C. & Jacobson, D., 1/05/2002, In: Transactions of the Institute of Metal Finishing. 80, 3, p. 92-96 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Dynamic elastic local buckling of piles under impact loads
Yang, J. & Ye, J. Q., 05/2002, In: Structural Engineering and Mechanics. 13, 5, p. 543-556 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Kinetic study on 2-methyl-1-butanol dehydration catalysed by ion exchange resin
Aiouache, F. & Goto, S., 05/2002, In: Journal of Chemical Engineering of Japan. 35, 5, p. 436-442 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rate acceleration of 2-methyl-1-butanol dehydration in a reactive distillation column
Aiouache, F. & Goto, S., 05/2002, In: Journal of Chemical Engineering of Japan. 35, 5, p. 443-449 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Automated wavelet selection and thresholding for PD detection.
Ma, X., Zhou, C. & Kemp, I. J., 04/2002, In: IEEE Electrical Insulation Magazine. 18, 2, p. 37-45 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Injection Mould Tool Manufacture in Less Than Five Days
Jacobson, D. M., Bocking, C. E. & Rennie, A., 03/2002, RAPRA Rapid Tooling Conference 2002: Conference Proceedings. RAPRA, p. 35-43 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Co-deposition of titanium/polytetrafluoroethylene films by unbalanced magnetron sputtering
Liu, C., Fairhurst, R. G., Ren, L. Q., Green, S. M., Tong, J. & Arnell, R. D., 15/01/2002, In: Surface and Coatings Technology. 149, 2-3, p. 143-150 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rapid production of microwave packaging in Silicon Aluminium by thin-shell electroforming
Bocking, C., Jacobson, D. M. & Rennie, A. E. W., 01/2002, In: Microelectronics International. 19, 1, p. 30-32 3 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A comparative study of multiple layer laser deposition using water and gas atomised 316L stainless steel powders
Pinkerton, A. J. & Li, L., 2002, Proceedings of the 21st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A verified model of the behaviour of the axial powder stream concentration from a coaxial laser cladding nozzle
Pinkerton, A. J. & Li, L., 2002, Proceedings of the 21st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
AFM measurement of nanoscale topographical and material wear features
Green, S., Elfick, A. P. & Unsworth, A., 2002, International conference engineers & surgeons - joined at the hip: refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. C601/032
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Direct laser deposition layer profiles and the factors affecting them
Pinkerton, A. J. & Li, L., 2002.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Electroforming for Injection Moulding
Rennie, A. E. W. & Bocking, C., 2002, In: State of the Art Report - RAPTIA European Thematic Network.
Research output: Contribution to Journal/Magazine › Journal article
Published
Interfacial stresses in plated beams with cracks
Yang, J. & Ye, J. Q., 2002, In: Composite Structures. 57, 1-4, p. 125-134 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Ion beam modification of Ti6Al4V alloy for TJR
Green, S., Boampong, D. K. & Unsworth, A., 2002, p. L68.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Laser rapid manufacturing process advancement through powder morphology
Pinkerton, A. J., 2002.
Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review
Published
Migration of a cemented hip joint prosthesis within a novel composite femur
Green, S., Gregg, P., Liu, C., Watkins, N. D. & McCaskie, A. W., 2002, International conference engineers & surgeons - joined at the hip : refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. C601
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Nanoscale wear degradation of alumina femoral head bearing surfaces assessed using an atomic force microscope
Green, S., Scholes, S. C. & Unsworth, A., 2002, International conference engineers & surgeons - joined at the hip: refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. C601/036
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Nanotribological characterisation of alumina femoral heads using an atomic force microscope
Scholes, S. C., Green, S. M. & Unsworth, A., 2002, In: Key Engineering Materials. 218-220, p. 543-548 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
On the influence of protein adsorption to phagocytosis of model polyethylene particles
Green, S., Elfick, A. P., Birch, M. A. & McCaskie, A. W., 2002, International conference engineers & surgeons - joined at the hip : refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. L27
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Rapid Prototyping, Tooling and Manufacturing: Proc. Third National Conference on
Rennie, A. E. W. (Editor), Jacobson, D. M. (Editor) & Bocking, C. (Editor), 2002, Professional Engineering Publishing. 173 p.
Research output: Book/Report/Proceedings › Book
Published
Restrained creep of CMW2000 Bone Cement
Green, S., Liu, C., Watkins, N. D., McCaskie, A. W. & Gregg, P. J., 2002, p. T84. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
The dynamic volume changes of polymerising polymethyl methacrylate bone cement
Muller, S. D., Green, S. M. & McCaskie, A. W., 2002, In: Acta Orthopaedica Scandinavica. 73, 6, p. 684-687 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The influence of radial clearance and wear testing on the tribology of alumina-alumina total hip prostheses
Green, S., Scholes, S. C. & Unsworth, A., 2002, International conference engineers & surgeons - joined at the hip: refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. C601/037
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The morphology of UHMWPE wear debris released from shoulder prostheses
Green, S., Elfick, A. P., Frostick, S. P. & Unsworth, A., 2002, p. 105. 1 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
2001
Published
Elasto-plastic response of uniformly loaded sector plates: full-section yield model predictions and spread of plasticity.
Turvey, G. J. & Salehi, M., 11/2001, In: Computers and Structures. 79, 26-28, p. 2335-2348 14 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
The Fabrication of MMC Electronic Packages using Thin Shell Electroformed (TSE) EDM Electrodes
Bocking, C., Jacobson, D. M., Rennie, A. & Bennett, G., 10/2001. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Liquid-liquid equilibria of ternary 2M1B/2M2B-2M1BOH-H2O and quaternary 2M1B-2M2B-2M1BOH-H2O mixtures
Aiouache, F. & Goto, S., 15/09/2001, In: Fluid Phase Equilibria. 187, p. 415-424 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An Investigation into the Use of Spray Formed Al/Si Metal Matrix Composites for Use as Injection Mould Die Inserts
Bocking, C., Jacobson, D. M. & Rennie, A., 09/2001, Time Compression technologies Conference 2001: Proceedings of. Rapid News Publications PLC, 22 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Rapid Production of Microwave Packaging in Silicon-Aluminium by Thin-Shell Electroforming
Bocking, C., Jacobson, D. M. & Rennie, A., 06/2001, 13th European Microelectronics and Packaging Conference & Exhibition, Proceedings of: iMAPS Strasbourg 2001, "The Millenium Conference". p. 412-415 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
The quantitative assessment of UHMWPE wear debris produced in hip simulator testing: the influence of head material and roughness, motion and loading.
Elfick, A. P. D., Smith, S. L., Green, S. M. & Unsworth, A., 06/2001, In: Wear. 249, 5-6, p. 517-527 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The wear of metal-on-metal total hip prostheses measured in a hip simulator.
Scholes, S. C., Green, S. M. & Unsworth, A., 06/2001, In: Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 215, 6, p. 523-530 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Edge effects in angle-ply laminated hollow cylinders
Ye, J. Q., 05/2001, In: Composite Structures. 52, 2, p. 247-253 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Some failure modes of four clinical bone cements
Liu, C., Green, S. M., Watkins, N. D., Gregg, P. J. & McCaskie, A. W., 1/04/2001, In: Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 215, 4, p. 359-366 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Statistical wear analysis of PA-6/UHMWPE alloy, UHMWPE and PA-6.
Liu, C. Z., Ren, L. Q., Tong, J., Joyce, T. J., Green, S. M. & Arnell, R. D., 04/2001, In: Wear. 249, 1-2, p. 31-36 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Electroforming of Rapid Prototyping Mandrels for Electro-Discharge Machining Electrodes
Rennie, A. E. W., Bocking, C. E. & Bennett, G. R., 19/03/2001, In: Journal of Materials Processing Technology. 110, 2, p. 186-196 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Decay rate of edge effects in cross-ply-laminated hollow cylinders
Ye, J. Q., 02/2001, In: International Journal of Mechanical Sciences. 43, 2, p. 455-470 16 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
"Pultruded GRP frames: simple (conservative) approach to design, a rational alternative and research needs for improved design".
Turvey, G. J., 2001, Proceedings of the ASCE sponsored workshop on composites in construction: a reality.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Compression failure mode of two CMW bone cements
Green, S., Liu, C., Watkins, N. D., Gregg, P. J. & McCaskie, A. W., 2001, European Society of Biomaterials 16th Conference Proceedings, London, UK, September 2001.. London: European Society for Biomaterials, p. P51
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract
Published
Effects of temperature on the structural integrity of bolted joints in pultrusions.
Turvey, G. J. & Wang, P., 2001, In: Composites in constructions. p. 171-176 6 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Elasto-plastic large deflection of uniformly loaded sector plates.
Turvey, G. J. & Salehi, M., 2001, Proceedings of the 3rd international conference on thin-walled structures. p. 631-640 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Evaluation of the structural performance of box beams fabricated from a novel system of pultruded profiles.
Turvey, G. J., 2001, In: Composites in constructions. p. 803-808 6 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
How size affects the mobility of THR wear debris
Green, S., Elfick, A. P. D. & Liu, C., 2001, European Society of Biomaterials 16th Conference Proceedings, London, UK, September 2001.. London: European Society for Biomaterials, p. T41
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract
Published
Interfacial shear transfer of RC beams strengthened by bonded composite plates
Ye, J. Q., 2001, In: Cement and Concrete Composites. 23, 4-5, p. 411-417 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Single bolt tension joints in pultruded GRP material – effect of elevated temperature on failure loads and strengths and joint efficiency.
Turvey, G. J. & Wang, P., 2001, Proceedings of the BSSM conference on strain measurement in the 21st century. p. 20-23 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Study and applications of a Bounding Method in stability analysis of Stiffened composite aerospace panels
Ye, J., 2001, Solids, structures and coupled problems in engineering : : proceedings of the 2nd European Conference on Computational Mechanics 26-29 June 2001, Cracow Poland. Waszczyszyn , Z. & Pamin, J. (eds.). Cracow: Cracow University of Technology
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The absence of nanometre sized UHMWPE wear particles retrieved from ex-vivo tissue
Green, S., Elfick, A. P. & Unsworth, A., 2001, Trans 4th Combined meeting Orthopaedic Research Societies of the USA, Europe Canada and Japan. Chicago, Ill. : Orthopaedic research society, p. 93 1 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract
Published
The friction and lubrication of alumina-on-alumina total hip prostheses - The effect of radial clearance and wear testing.
Scholes, S. C., Green, S. M. & Unsworth, A., 2001, In: Key Engineering Materials. 218-220, p. 535-540 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
2000
Published
Experimental and computed natural frequencies of square pultruded GRP plates: effects of anisotropy, hole size ratio and edge support conditions.
Turvey, G. J., Mulcahy, N. & Widden, M. B., 12/2000, In: Composite Structures. 50, 4, p. 391-403 13 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Electroforming of a Thermojet Master Pattern for use as an Electro-Discharge Machine Electrode
Bocking, C., Rennie, A., Bennett, G. & Lewis, N., 10/2000, Time Compression Technologies 2000 Conference: Proceedings of. Rapid News Publications PLC, p. 151-156 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A feasibility study into the use of wavelet transform in partial discharge analysis.
Ma, X., Zhou, C. & Kemp, I. J., 09/2000. 5 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Closure to “Buckling Analysis of Angle‐Ply Multilaminated Long Hollow Cylinders”
Ye, J. Q., 08/2000, In: Journal of Engineering Mechanics. 126, 8, p. 887-887 1 p.
Research output: Contribution to Journal/Magazine › Editorial › peer-review
Published
Micro-mechanical analysis of splitting failure in concrete reinforced with fiber reinforced plastic rods
Ye, J. Q. & Wu, Z. J., 08/2000, In: Cement and Concrete Composites. 22, 4, p. 243-251 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Relationship Between Wall Thickness and Erosion Depth of Thin Walled Electroformed EDM Electrodes Produced from RP Models
Bocking, C. E., Rennie, A. & Bennett, G. R., 08/2000, 11th International Solid Freeform Fabrication Symposium (SFF 2000). University of Texas at Austin, p. 469-477 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Electroforming of a Stereolithography Master Pattern for use as an Electro-Discharge Machine electrode
Rennie, A., Bocking, C. E. & Bennett, G. R., 07/2000, Proceedings of the 33rd International MATADOR Conference: Formerly The International Machine Tool Design and Research Conference. Springer-Verlag, p. 301-306 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Surface Flatness Measurement in Stereolithography
Male, J. C., Rennie, A. & Bennett, G. R., 06/2000, The Eighth International Conference on Rapid Prototyping: Proc. of. The University of Dayton, p. 111-117 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Surface modification of PTFE by plasma treatment
Liu, C., Arnell, R. D., Gibbons, A. R., Green, S. M., Ren, L. & Tong, J., 06/2000, In: Surface Engineering. 16, 3, p. 215-217 3 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
3D analysis of stress transfer in the micromechanics of fiber reinforced composites by using an eigen-function expansion method
Wu, Z. J., Ye, J. Q. & Cabrera, J. G., 05/2000, In: Journal of the Mechanics and Physics of Solids. 48, 5, p. 1037-1063 27 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A novel technique for the detailed size characterization of wear debris.
Elfick, A. P., Green, S. M., Pinder, I. M. & Unsworth, A., 05/2000, In: Journal of Materials Science: Materials in Medicine. 11, 5, p. 267-271 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Cytocompatibility evaluation of surface modified Ni-Ti shape memory alloy using the MTT assay
Green, S. M., Grant, D. M. & Wood, J. V., 25/04/2000, In: Biomedical Engineering - Applications, Basis and Communications. 12, 2, p. 55-59 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Bolted connections in PFRP structures.
Turvey, G. J., 2000, In: Progress in Structural Engineering and Materials. 2, 2, p. 146-156 11 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Comparative analysis of bone cement fracture surfaces
Green, S., Liu, C., Watkins, N. D. & McCaskie, A. W., 2000, 11th International Conference on Deformation, Yield and Fracture of Polymers : 10 - 13 April 2000, Churchill College, Cambridge, UK.. Cambridge : IOM communications, p. 325-328 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Cytomcompatibility evaluation of surface modified Ni-Ti shape memory alloy using the MTT assay
Green, S., Grant, D. M. & Wood, J. V., 2000, Processing and fabrication of advanced materials VIII : proceedings of a symposium ... September 8-10, 1999, Mandarin Hotel, Orchard Road, Singapore . Khor, K. A. (ed.). Singapore: World Scientific Publishing, p. 141-148 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Edge effects in cross-ply laminated hollow cylindrical shells
Ye, J. Q., 2000, Computational techniques for materials, composites and composite structures. Topping, B. (ed.). Edinburgh: Civil-Comp Press, p. 359-363 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Previous 1...5 6 7 8 9 10 11 Next

Research

Manufacturing

Quick Links

Connect With Us