Home > Research > Researchers > Professor Allan Rennie > Publications

Research

Professor Allan Rennie

Professor in Manufacturing Engineering & Director of Engagement

1 - 100 out of 244Page size: 100
RSS feed of this list
  1. 1996
  2. Published

    Rapid prototyping using electrodeposition of copper

    Dover, S. J., Rennie, A. & Bennett, G. R., 08/1996, Solid Freeform Fabrication Symposium 1996. University of Texas at Austin, p. 191-198 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  3. Published

    The wear of High Speed Selective Jet Electrodeposition electrodes when used as EDM tools

    Dover, S. J., Rennie, A. & Bennett, G. R., 11/1996, Proceedings of the Second National Conference on developments in rapid prototyping and tooling. Mechanical Engineering Publications Ltd, p. 187-199 13 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  4. 1997
  5. Published

    Development of a Continuous Droplet Generation System of Molten Metals using Electromotive Forces, with a View to its use in the Rapid Tooling Industry

    Rennie, A. & Bennett, G. R., 07/1997, Proceedings of the Thirty-Second International Manufacturing, Automation and Systems, Technology, Applications, Design, Organisation and Management, Research (MATADOR) Conference. p. 399-403 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  6. Published

    A system for the generation of liquid metal droplets using electromotive forces

    Rennie, A. & Bennett, G. R., 09/1997, Proceedings World Congress: Manufacturing Technology Towards 2000: Incorporating the 7th International Conference on Manufacturing Engineering and the 3rd Australasian Conference on Rapid Product Development. James Cook University of North Queensland, p. 501-510 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  7. 2000
  8. Published

    Simulation and manufacture of wax toolfaces for the creation of silicone rubber tools using Magics™ RP software

    Rennie, A. & Bennett, G. R., 2000, In: International Journal of Engineering Simulation. 1, 3, p. 24-30 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  9. Published

    Surface Flatness Measurement in Stereolithography

    Male, J. C., Rennie, A. & Bennett, G. R., 06/2000, The Eighth International Conference on Rapid Prototyping: Proc. of. The University of Dayton, p. 111-117 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  10. Published

    Electroforming of a Stereolithography Master Pattern for use as an Electro-Discharge Machine electrode

    Rennie, A., Bocking, C. E. & Bennett, G. R., 07/2000, Proceedings of the 33rd International MATADOR Conference: Formerly The International Machine Tool Design and Research Conference. Springer-Verlag, p. 301-306 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  11. Published

    Relationship Between Wall Thickness and Erosion Depth of Thin Walled Electroformed EDM Electrodes Produced from RP Models

    Bocking, C. E., Rennie, A. & Bennett, G. R., 08/2000, 11th International Solid Freeform Fabrication Symposium (SFF 2000). University of Texas at Austin, p. 469-477 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  12. Published

    Electroforming of a Thermojet Master Pattern for use as an Electro-Discharge Machine Electrode

    Bocking, C., Rennie, A., Bennett, G. & Lewis, N., 10/2000, Time Compression Technologies 2000 Conference: Proceedings of. Rapid News Publications PLC, p. 151-156 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  13. 2001
  14. Published

    Electroforming of Rapid Prototyping Mandrels for Electro-Discharge Machining Electrodes

    Rennie, A. E. W., Bocking, C. E. & Bennett, G. R., 19/03/2001, In: Journal of Materials Processing Technology. 110, 2, p. 186-196 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  15. Published

    Rapid Production of Microwave Packaging in Silicon-Aluminium by Thin-Shell Electroforming

    Bocking, C., Jacobson, D. M. & Rennie, A., 06/2001, 13th European Microelectronics and Packaging Conference & Exhibition, Proceedings of: iMAPS Strasbourg 2001, "The Millenium Conference". p. 412-415 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  16. Published

    An Investigation into the Use of Spray Formed Al/Si Metal Matrix Composites for Use as Injection Mould Die Inserts

    Bocking, C., Jacobson, D. M. & Rennie, A., 09/2001, Time Compression technologies Conference 2001: Proceedings of. Rapid News Publications PLC, 22 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  17. Published

    The Fabrication of MMC Electronic Packages using Thin Shell Electroformed (TSE) EDM Electrodes

    Bocking, C., Jacobson, D. M., Rennie, A. & Bennett, G., 10/2001. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  18. 2002
  19. Published

    Electroforming for Injection Moulding

    Rennie, A. E. W. & Bocking, C., 2002, In: State of the Art Report - RAPTIA European Thematic Network.

    Research output: Contribution to Journal/Magazine › Journal article

  20. Published

    Rapid Prototyping, Tooling and Manufacturing: Proc. Third National Conference on

    Rennie, A. E. W. (Editor), Jacobson, D. M. (Editor) & Bocking, C. (Editor), 2002, Professional Engineering Publishing. 173 p.

    Research output: Book/Report/Proceedings › Book

  21. Published

    Rapid production of microwave packaging in Silicon Aluminium by thin-shell electroforming

    Bocking, C., Jacobson, D. M. & Rennie, A. E. W., 01/2002, In: Microelectronics International. 19, 1, p. 30-32 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  22. Published

    Injection Mould Tool Manufacture in Less Than Five Days

    Jacobson, D. M., Bocking, C. E. & Rennie, A., 03/2002, RAPRA Rapid Tooling Conference 2002: Conference Proceedings. RAPRA, p. 35-43 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  23. Published

    The Fabrication of Electronic Packages from High Silicon Aluminium Alloys Using Thin Shell Electroformed (TSE) EDM Electrodes

    Rennie, A. E. W., Bennett, G., Bocking, C. & Jacobson, D., 1/05/2002, In: Transactions of the Institute of Metal Finishing. 80, 3, p. 92-96 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  24. Published

    Injection mould tool manufacture in less than five days

    Jacobson, D., Bocking, C. & Rennie, A. E. W., 1/06/2002, 9 p. Society of Manufacturing Engineers.

    Research output: Other contribution

  25. 2003
  26. Published

    Rapid and virtual prototyping and applications: Proceedings of the Fourth National Conference on (Incorporating RAPTIA (Rapid Prototyping and Tooling - Industrial Applications) State-of-the-Art Reports

    Bocking, C. E. (Editor), Rennie, A. (Editor) & Jacobson, D. M. (Editor), 2003, Professional Engineering Publishing. 330 p.

    Research output: Book/Report/Proceedings › Book

  27. Published

    Electroforming for Injection Moulding

    Rennie, A. & Bocking, C., 20/06/2003, Rapid and Virtual Prototyping and Applications: Proc. Fourth National Conference on (Incorporating RAPTIA (Rapid Prototyping and Tooling - Industrial Applications) State-of-the-Art Reports). Bocking, C., Rennie, A. & Jacobson, D. (eds.). Professional Engineering Publishing, p. 239-248

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  28. 2004
  29. Published

    Rapid design, prototyping and manufacture: Proceedings of the Fifth National Conference on

    Jacobson, D. M. (Editor), Rennie, A. (Editor) & Bocking, C. E. (Editor), 2004, Professional Engineering Publishing. 111 p.

    Research output: Book/Report/Proceedings › Book

  30. 2005
  31. Published

    Rapid design, prototyping and manufacture: Proceedings of the Sixth National Conference on

    Rennie, A. (Editor), Jacobson, D. M. (Editor) & Bocking, C. E. (Editor), 2005, X-CD Technologies Inc. 129 p.

    Research output: Book/Report/Proceedings › Book

  32. Published

    SME expectations and experiences

    Seward, D., Quayle, S., Rennie, A. & Taylor, S., 2005. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Speech

  33. Published

    From Concept to Manufacture: Effective use of CAD and FEA Without Compromising Design Intent

    Taylor, S. M., Rennie, A. E. W., Quayle, S. & Rawcliffe, N., 10/06/2005, Rapid Design, Prototyping and Manufacture: Proc. Sixth National Conference on . Rennnie, A., Jacobson, D. & Bocking, C. (eds.). X-CD Technologies Inc, p. 101-107 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  34. Published

    Virtual Prototyping

    Rennie, A., 07/2005, N/A. 77 p.

    Research output: Book/Report/Proceedings › Commissioned report

  35. 2006
  36. Published

    Rapid design, prototyping and manufacture: proceedings of the seventh national conference on

    Bocking, C. E. (Editor), Rennie, A. E. W. (Editor) & Jacobson, D. M. J. (Editor), 2006, MJA Print. 134 p.

    Research output: Book/Report/Proceedings › Book

  37. Published

    Virtual Prototyping Phase II

    Rennie, A., 05/2006, N/A. 37 p.

    Research output: Book/Report/Proceedings › Commissioned report

  38. Published

    Lancaster Virtual Prototyping Project: (GONW5167/8EUR – M4-07-LANC)

    Rennie, A. E. W., 15/11/2006, Proceedings of the 4th EU Best Practice Conference: New Horizons in Graz..

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  39. 2007
  40. Published

    Effect of wind loading on low rise buildings using finite element modelling and computational fluid dynamics: A commercially focused appoach

    Taylor, S., Rennie, A. & McDonald, W., 2007, Virtual and Rapid Manufacturing: Advanced Research in Virtual and Rapid Prototyping. Bartolo, P. J. D. S. (ed.). London: Taylor & Francis Group, p. 811-816 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  41. Published

    Integrating CFD and prototyping technologies in the investigation of multi-element profiles for a high-lift variable pitch vertical-axis tidal power generator

    Quayle, S. & Rennie, A., 2007, In: International Journal of Agile Systems and Management. 2, 2, p. 222-236 15 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  42. Published

    Rapid design, prototyping and manufacture: Proceedings of the Eighth National Conference on

    Jacobson, D. M. (Editor), Bocking, C. E. (Editor) & Rennie, A. (Editor), 2007, MJA Print. 140 p.

    Research output: Book/Report/Proceedings › Book

  43. Unpublished

    Virtual Prototyping Phase III

    Rennie, A., 01/2007, (Unpublished) N/A. 54 p.

    Research output: Book/Report/Proceedings › Commissioned report

  44. Published

    A transnational approach to the implementation of eco-design methodologies in SMEs

    Rennie, A., Lambert, C., Baker, N. & Hjelm, O., 10/07/2007, The proceedings of the 5th International Conference on Design & Manufacture for Sustainable Development : Loughborough University, 10th - 11th July 2007.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  45. Published

    Delivering eco design business support to SMEs on a transnational scale: benefits and learning outcomes

    Lambert, C., Rennie, A., Baker, N. & Hjelm, O., 7/11/2007. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract

  46. Unpublished

    Rapid Manufacturing Design Scenarios

    Smith, P. & Rennie, A., 12/2007, (Unpublished). 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  47. 2008
  48. Published

    Rapid design, prototyping and manufacturing: Proceedings of the Ninth National Conference on

    Rennie, A. (Editor), Jacobson, D. M. (Editor) & Bocking, C. E. (Editor), 2008, MJA Print. 173 p.

    Research output: Book/Report/Proceedings › Book

  49. Unpublished

    The UK Business Support Simplification Programme: A Case Study for the North West Universities Association from Lancaster University : Invited paper for the UK consultation process for DBERR's initiative to streamline business support services

    Lambert, C., Rennie, A. & Williams, D., 2008, (Unpublished) 10 p.

    Research output: Working paper

  50. Published

    Design templates for consumer use in customising additive layer manufactured products

    Ariadi, Y. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 137-144 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  51. Published

    Development of an Additive Layer Manufacturing business model: creating an environment to support designers from concept to distribution

    Ariadi, Y., Hasan, S., Smith, P. & Rennie, A., 06/2008, Proceedings of 32nd Japan Rapid Prototyping Symposium. p. 79-84 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  52. Published

    Development of an Additive Layer Manufacturing Selection Tool for Rapid Manufacturing Applications

    Smith, P. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 69-79 11 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  53. Published

    Encouraging Environmental Responsibility in Small Businesses

    Moss, J., Lambert, C. & Rennie, A., 06/2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  54. Published

    SME application of LCA-based carbon footprints

    Moss, J., Lambert, C. & Rennie, A., 06/2008, In: International Journal of Sustainable Engineering. 1, 2, p. 132-141 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  55. Unpublished

    The SME Carbon Game: Issues faced when developing a Carbon Footprint Toolkit for SMEs

    wrigley, S., Lambert, C. & Rennie, A., 06/2008, (Unpublished). 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  56. Published

    Virtual Trading System for Rapid Manufactured Products

    Hasan, S. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 127-135 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  57. Published

    Comparing Carbon Footprint Methodologies for SMEs

    Moss, J., Lambert, C. & Rennie, A., 08/2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review

  58. Published

    Development of an Additive Layer Manufacturing (ALM) selection tool for direct manufacture of products

    Smith, P. & Rennie, A., 08/2008, Solid Freeform Fabrication Symposium 2008. University of Texas at Austin, p. 507-518 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  59. Published

    Templates for consumer use in designing customised products

    Ariadi, Y. & Rennie, A., 08/2008, Solid Freeform Fabrication Symposium 2008. University of Texas at Austin, p. 450-458 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  60. Published

    The application of rapid manufacturing technologies in the spare parts industry

    Hasan, S. & Rennie, A., 08/2008, Sild Freeform Fabrication Symposium 2008. University of Texas at Austin, p. 584-590 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  61. Published

    The development of an innovative SME-focused toolset integrating carbon footprint calculation with lean manufacturing waste reduction techniques

    Wrigley, S., Lambert, C. & Rennie, A., 08/2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review

  62. Published

    A Comprehensive Business Model for Rapid Manufactured Products

    Hasan, S. & Rennie, A., 10/2008, 19th International Symposium of the Danube-Adria-Association-for-Automation-and-Manufacturing - Intelligent Manufacturing & Automation: Focus on Next Generation of Intelligent Systems and Solutions. Vienna: DAAAM International, p. 591-592 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  63. Unpublished

    Consultancy and Support: Computer Aided Design & Engineering: (incorporating the Rapid Manufacturing North West & Sustainable Product Development sub-Projects) - Lancaster University Final Report

    Rennie, A., 10/2008, (Unpublished) N/A. 129 p.

    Research output: Book/Report/Proceedings › Commissioned report

  64. Unpublished

    Rapid Manufacturing Design Tools

    Smith, P. & Rennie, A., 12/2008, (Unpublished). 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  65. 2009
  66. Published

    A review of suitable methods for producing automated or semi automated product designs for production using RM technologies

    Rennie, A. & Smith, P., 2009, 14th European Forum on Rapid Prototyping and Manufacturing: Proceedings of the. 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  67. Published

    Rapid Design, Prototyping and Manufacturing: Proceedings of the Tenth National Conference on

    Rennie, A. (Editor), Bocking, C. E. (Editor) & Jacobson, D. M. (Editor), 2009, MJA Print. 123 p.

    Research output: Book/Report/Proceedings › Book

  68. Published

    Assistive CAD Tools: A Review of Automated Design Methods within Computer Aided Design

    Smith, P. & Rennie, A., 06/2009, Rapid Design, Prototyping and Manufacturing: Proceedings of the Tenth National Conference on . Rennie, A., Bocking, C. & Jacobson, D. (eds.). High Wycombe: MJA Print, p. 17-25 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  69. Published

    Barriers to training for employees at SMEs in the construction sector

    Ganah, A. & Rennie, A., 07/2009, The First TG 59 International People in Construction Conference. p. 138-146 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  70. Published

    Effect of Thermal and Mechanical Deformation of Metamaterial FDM Components

    Celik, H. K., Tan, Y., Seviour, R. & Rennie, A., 09/2009, US _ TURKEY Workshop on Rapid Technologies (RapidTech 2009). p. 83-88 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  71. Published

    A Computer Aided Design (CAD) support tool for parametric design of products for Rapid Manufacture (RM)

    Smith, P. & Rennie, A., 10/2009, 4th International Conference on Advanced Research in Virtual and Rapid Prototyping: Proceedings of the . Leiria, Portugal: Taylor & Francis Group, p. 95-100 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  72. Unpublished

    A Comparison of Carbon Footprint Calculations for End of Life Product Recovery Methods using PAS 2050

    Appleby, M., Lambert, C. & Rennie, A., 12/2009, (Unpublished). 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  73. Published

    Rapid manufacturing complex geometries for high-power microwave applications

    Seviour, R., Rennie, A. & Celik, H. K., 12/2009.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  74. 2010
  75. Published

    Rapid Design, Prototyping and Manufacturing: Proceedings of the Eleventh National Conference on

    Jacobson, D. M. (Editor), Rennie, A. (Editor) & Bocking, C. E. (Editor), 2010, CRDM Ltd. 222 p.

    Research output: Book/Report/Proceedings › Book

  76. Published

    Deep tillage tool optimization by means of finite element method: Case study for a subsoiler tine

    Topakci, M., Celik, H. K., Canakci, M., Rennie, A., Akinci, I. & Karayel, D., 04/2010, In: Journal of Food, Agriculture and Environment. 8, 2, p. 531-536 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  77. Published

    Analysis of existing Additive manufacturing material selectors

    Hambali, R. H. & Rennie, A., 06/2010. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  78. Published

    Computer Aided Material Selection (CAMS) for Additive Manufacturing Materials

    Smith, P. & Rennie, A., 06/2010, 11th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Jacobson, D., Rennie, A. & Bocking, C. (eds.). High Wycombe: CRDM Ltd, p. 55-61 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  79. Published

    Rapid Prototyping and Flow Simulation Applications in Design of Agricultural Irrigation Equipment: Case Study for a Sample In-Line Drip Emitter

    Celik, K., Karayel, D., Caglayan, N., Rennie, A. & Akinci, I., 06/2010, 11th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Jacobson, D., Rennie, A. & Bocking, C. (eds.). High Wycombe: CRDM Ltd, p. 181-191 11 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  80. Published

    A comparison of carbon footprint calculations for end of life product recovery methods using PAS 2050

    Appleby, M., Lambert, C., Rennie, A. & Buckley, A., 07/2010, Proceedings of the ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis: (ESDA 2010). ASME, 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  81. Published

    Using additive manufacturing effectively: a CAD tool to support decision making

    Smith, P. & Rennie, A., 07/2010, 36th International MATADOR Conference. Hinduja, S. & Li, L. (eds.). Springer-Verlag, p. 381-384 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  82. Published

    Placing postgraduate research students at the heart of knowledge exchange: benefits for academia and industry

    Lambert, C. & Rennie, A., 1/07/2010, Proceedings of the 3rd International Symposium for Engineering Education (ISEE2010): educating engineers for a changing world : leading transformation from an unsustainable global society. p. 485-493 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  83. Published

    Effect of build orientation on FDM parts: a case study for validation of deformation behaviour by FEA

    Hambali, R. H., Celik, K., Smith, P., Rennie, A. & Ucar, M., 09/2010, International Conference on Design and Concurrent Engineering (iDECON 2010): Manufacturing Challenges Towards Global Sustainability. Penerbit Universiti (UTeM), p. 224-228 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  84. Published

    Skills development of employees at SMEs in the construction sector in the North of England

    Ganah, A. & Rennie, A., 09/2010, The Construction, Building and Real Estate Research Conference of the Royal Institution of Chartered Surveyors (COBRA 2010): Proceedings of. Royal Institution of Chartered Surveyors (RICS), 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  85. Published

    Structural optimisation of a subsoiler

    Topakci, M., Celik, H. K., Canakci, M., Karayel, D. & Rennie, A., 09/2010, In: Pakistan Journal of Scientific and Industrial Research. 53, 5, p. 281-287 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  86. Published

    Use of FDM in an undergraduate student project: design, build and test a model wind turbine

    Widden, M., Gunn, K. & Rennie, A., 09/2010, 3rd International Conference on Additive Technologies (iCAT 2010); DAAAM Specialized Conference. DAAAM International, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  87. Published

    Modal analysis of agricultural machineries using finite element method: a case study for a V-belt pulley of a fodder crushing machine

    Celik, H. K., Topakci, M., Canakci, M., Rennie, A. & Akinci, I., 12/11/2010, In: Journal of Food, Agriculture and Environment. 8, 3-4, p. 439-446 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  88. Published

    Computer aided material selection for additive manufacturing materials

    Smith, P. & Rennie, A., 12/2010, In: Virtual and Physical Prototyping. 5, 4, p. 209-213 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  89. Published

    Rapid design, prototyping and manufacturing

    Rennie, A., Aitchison, D. (Editor) & Jacobson, D. M., 12/2010, In: Virtual and Physical Prototyping. 5, 4, p. 181-181 1 p.

    Research output: Contribution to Journal/Magazine › Editorial

  90. 2011
  91. Published

    Product Optimization by Rapid Manufacturing and Targeted Functional Analysis

    Lupeanu, M., Rennie, A., Neagu, C. & Celik, K., 2011, 16th European Forum on Rapid Prototyping and Manufacturing: Proceedings of the. 14 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  92. Published

    Selective laser melting for near net-shape manufacturing: Investigation into structure-parameter relationships and phase determination by X-ray diffraction in stainless steel alloy systems

    Green, S., OMeara, N. & Rennie, A., 2011. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  93. Published

    Rapid prototyping and flow simulation applications in design of agricultural irrigation equipment: Case study for a sample in-line drip emitter: The paper is to study CFD and RP application samples on the design issues associated with agricultural irrigation equipment

    Celik, K., Karayel, D., Caglayan, N., Rennie, A. & Akinci, I., 03/2011, In: Virtual and Physical Prototyping. 6, 1, p. 47-56 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  94. Published

    An investigation into the environmental impact of product recovery methods to support sustainable manufacturing within small and medium-sized enterprises (SMEs)

    Appleby, M., Lambert, C., Rennie, A. & Buckley, A., 04/2011, In: International Journal of Manufacturing, Materials, and Mechanical Engineering (IJMMME). 1, 2, p. 1-18 18 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  95. Published

    Deformation behaviour simulation of an apple under drop case by finite element method

    Celik, H. K., Rennie, A. & Akinci, I., 05/2011, In: Journal of Food Engineering. 104, 2, p. 293-298 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  96. Published

    Additive manufacturing technologies and functional analysis used in product development optimization

    Lupeanu, M., Rennie, A. & Neagu, C., 06/2011, Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 105-112 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  97. Published

    Deformation simulation of additive manufacturing FDM parts: a case study for greenhouse clips

    Celik, H. K., Hambali, R. H., Rennie, A. & Akinci, I., 06/2011, Rapid Design Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 155-162 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  98. Published

    Optimisation of build orientation for FDM additive manufactured products

    Hambali, R. H., Vaudelin, M. & Rennie, A., 06/2011.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review

  99. Published

    Polarities of function and form using additive manufacturing - where the middle ground might be in achieving a creative balance for SMEs

    Kaufman, J., Rennie, A. & Quayle, S., 06/2011, Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 135-143 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  100. Published

    Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on

    Rennie, A. (Editor) & Bocking, C. E. (Editor), 06/2011, CRDM Ltd. 203 p.

    Research output: Book/Report/Proceedings › Book

  101. Published

    Redesign of custom-fitted surgical guide with targeted functional analysis fabricated via SLM

    Lupeanu, M., Rennie, A., Eggbeer, D. & Neagu, C., 06/2011, Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 173-181 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  102. Published

    Variable Fused Deposition Modelling – Concept Design and Tool Path Generation

    Brooks, H., Rennie, A., Abram, T., McGovern, J. & Caron, F., 06/2011, Rapid Design, Prototyping and Manufacturing: Proc Twelfth Conference on. p. 113-122 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  103. Published

    A Basic Design-Build-Test Experience: Model Wind Turbine using Additive Manufacture

    Widden, M., Rennie, A., Quayle, S. & Gunn, K., 23/06/2011, Conference proceedings 7th International CDIO Conference, Technical University of Denmark, 20th – 22nd June 2011. Technical University of Denmark, p. 1039-1048 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  104. Published

    Geometry Optimisation of Tools used in Milling of Spherical Surfaces

    Neagu, C., Lupeanu, M. & Rennie, A., 07/2011, SIM2011 - Sustainable Intelligent Manufacturing : Proceedings of the 1st International Conference on Sustainable Intelligent Manufacturing. Bartolo, H. (ed.). Leiria, Portugal, p. 87-94 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  105. Published

    Sizing Optimisation of a Subsoiler Framework using Advanced Engineering Tools

    Celik, K., Rennie, A., Topakci, M. & Akinci, I., 07/2011, Proceedings of the XXXIV CIOSTA CIGR V Conference 2011: Efficient and safe production processes in sustainable agriculture and forestry. 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  106. Published

    Determination of flow parameters through CFD analysis for agricultural irrigation equipment: a case study for a mini valve

    Celik, K., Rennie, A., Karayel, D. & Akinci, I., 09/2011, In: Journal of Agricultural Machinery Science. 7, 3, p. 231-239 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  107. Published

    Determination of flow parameters through CFD analysis for agricultural irrigation equipment: a case study for a mini valve

    Celik, H. K., Rennie, A., Karayel, D. & Akinci, I., 09/2011, p. 59. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  108. Published

    Opportunities offered by additive manufacturing in creative businesses: informing designers

    Anthony, R., Evans, M., Rennie, A. & Kirby, E., 09/2011, 13th International Conference on Engineering & Product Design Education (EPDE 11). p. 623-628 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  109. Published

    Surface finishing techniques for SLM manufactured stainless steel 316L components

    Morton, W., Green, S., Rennie, A. & Abram, T., 10/2011, Innovative Developments in Virtual and Physical Prototyping: Proc. of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping. CRC PRESS-TAYLOR & FRANCIS GROUP, p. 503-509 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  110. Published

    Variable fused deposition modelling: analysis of benefits, concept design and tool path generation

    Brooks, H., Rennie, A., Abram, T., McGovern, J. & Caron, F., 10/2011, Innovative Developments in Virtual and Physical Prototyping: Proceedings of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping. CRC PRESS-TAYLOR & FRANCIS GROUP, p. 511-517 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  111. Published

    Delivering Regional Eco-Innovation through Knowledge Exchange

    Lambert, C. & Rennie, A., 25/10/2011. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  112. Published

    Automated variation in product design: Using visual basics.net programming language to generate product variation

    Smith, P. & Rennie, A., 11/2011, Proceedings of the RAPDASA 2011 Conference. 17 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  113. 2012
  114. Published

    Additive manufacturing technology and material selection for direct manufacture of products based on computer aided design geometric feature analysis

    Smith, P., Lupeanu, M. & Rennie, A., 2012, In: International Journal of Materials and Structural Integrity. 6, 2-4, p. 96-110 15 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  115. Published

    Determination of the effect of part orientation to the strength value on additive manufacturing FDM for end-use parts by physical testing and validation via three-dimensional finite element analysis

    Hambali, R. H., Smith, P. & Rennie, A., 2012, In: International Journal of Materials Engineering Innovation. 3, 3-4, p. 269-281 13 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1 2 3 Next

Back to top