Home > Research > Researchers > Professor Allan Rennie > Publications

Research

Professor Allan Rennie

Professor in Manufacturing Engineering & Director of Engagement

201 - 244 out of 244Page size: 100
RSS feed of this list
  1. 2008
  2. Published

    Development of an Additive Layer Manufacturing business model: creating an environment to support designers from concept to distribution

    Ariadi, Y., Hasan, S., Smith, P. & Rennie, A., 06/2008, Proceedings of 32nd Japan Rapid Prototyping Symposium. p. 79-84 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  3. Published

    Development of an Additive Layer Manufacturing Selection Tool for Rapid Manufacturing Applications

    Smith, P. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 69-79 11 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  4. Published

    Encouraging Environmental Responsibility in Small Businesses

    Moss, J., Lambert, C. & Rennie, A., 06/2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  5. Published

    SME application of LCA-based carbon footprints

    Moss, J., Lambert, C. & Rennie, A., 06/2008, In: International Journal of Sustainable Engineering. 1, 2, p. 132-141 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  6. Unpublished

    The SME Carbon Game: Issues faced when developing a Carbon Footprint Toolkit for SMEs

    wrigley, S., Lambert, C. & Rennie, A., 06/2008, (Unpublished). 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  7. Published

    Virtual Trading System for Rapid Manufactured Products

    Hasan, S. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 127-135 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  8. Published

    Rapid design, prototyping and manufacturing: Proceedings of the Ninth National Conference on

    Rennie, A. (Editor), Jacobson, D. M. (Editor) & Bocking, C. E. (Editor), 2008, MJA Print. 173 p.

    Research output: Book/Report/Proceedings › Book

  9. Unpublished

    The UK Business Support Simplification Programme: A Case Study for the North West Universities Association from Lancaster University : Invited paper for the UK consultation process for DBERR's initiative to streamline business support services

    Lambert, C., Rennie, A. & Williams, D., 2008, (Unpublished) 10 p.

    Research output: Working paper

  10. 2007
  11. Unpublished

    Rapid Manufacturing Design Scenarios

    Smith, P. & Rennie, A., 12/2007, (Unpublished). 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  12. Published

    Delivering eco design business support to SMEs on a transnational scale: benefits and learning outcomes

    Lambert, C., Rennie, A., Baker, N. & Hjelm, O., 7/11/2007. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract

  13. Published

    A transnational approach to the implementation of eco-design methodologies in SMEs

    Rennie, A., Lambert, C., Baker, N. & Hjelm, O., 10/07/2007, The proceedings of the 5th International Conference on Design & Manufacture for Sustainable Development : Loughborough University, 10th - 11th July 2007.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  14. Unpublished

    Virtual Prototyping Phase III

    Rennie, A., 01/2007, (Unpublished) N/A. 54 p.

    Research output: Book/Report/Proceedings › Commissioned report

  15. Published

    Effect of wind loading on low rise buildings using finite element modelling and computational fluid dynamics: A commercially focused appoach

    Taylor, S., Rennie, A. & McDonald, W., 2007, Virtual and Rapid Manufacturing: Advanced Research in Virtual and Rapid Prototyping. Bartolo, P. J. D. S. (ed.). London: Taylor & Francis Group, p. 811-816 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  16. Published

    Integrating CFD and prototyping technologies in the investigation of multi-element profiles for a high-lift variable pitch vertical-axis tidal power generator

    Quayle, S. & Rennie, A., 2007, In: International Journal of Agile Systems and Management. 2, 2, p. 222-236 15 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  17. Published

    Rapid design, prototyping and manufacture: Proceedings of the Eighth National Conference on

    Jacobson, D. M. (Editor), Bocking, C. E. (Editor) & Rennie, A. (Editor), 2007, MJA Print. 140 p.

    Research output: Book/Report/Proceedings › Book

  18. 2006
  19. Published

    Lancaster Virtual Prototyping Project: (GONW5167/8EUR – M4-07-LANC)

    Rennie, A. E. W., 15/11/2006, Proceedings of the 4th EU Best Practice Conference: New Horizons in Graz..

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  20. Published

    Virtual Prototyping Phase II

    Rennie, A., 05/2006, N/A. 37 p.

    Research output: Book/Report/Proceedings › Commissioned report

  21. Published

    Rapid design, prototyping and manufacture: proceedings of the seventh national conference on

    Bocking, C. E. (Editor), Rennie, A. E. W. (Editor) & Jacobson, D. M. J. (Editor), 2006, MJA Print. 134 p.

    Research output: Book/Report/Proceedings › Book

  22. 2005
  23. Published

    Virtual Prototyping

    Rennie, A., 07/2005, N/A. 77 p.

    Research output: Book/Report/Proceedings › Commissioned report

  24. Published

    From Concept to Manufacture: Effective use of CAD and FEA Without Compromising Design Intent

    Taylor, S. M., Rennie, A. E. W., Quayle, S. & Rawcliffe, N., 10/06/2005, Rapid Design, Prototyping and Manufacture: Proc. Sixth National Conference on . Rennnie, A., Jacobson, D. & Bocking, C. (eds.). X-CD Technologies Inc, p. 101-107 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  25. Published

    Rapid design, prototyping and manufacture: Proceedings of the Sixth National Conference on

    Rennie, A. (Editor), Jacobson, D. M. (Editor) & Bocking, C. E. (Editor), 2005, X-CD Technologies Inc. 129 p.

    Research output: Book/Report/Proceedings › Book

  26. Published

    SME expectations and experiences

    Seward, D., Quayle, S., Rennie, A. & Taylor, S., 2005. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Speech

  27. 2004
  28. Published

    Rapid design, prototyping and manufacture: Proceedings of the Fifth National Conference on

    Jacobson, D. M. (Editor), Rennie, A. (Editor) & Bocking, C. E. (Editor), 2004, Professional Engineering Publishing. 111 p.

    Research output: Book/Report/Proceedings › Book

  29. 2003
  30. Published

    Electroforming for Injection Moulding

    Rennie, A. & Bocking, C., 20/06/2003, Rapid and Virtual Prototyping and Applications: Proc. Fourth National Conference on (Incorporating RAPTIA (Rapid Prototyping and Tooling - Industrial Applications) State-of-the-Art Reports). Bocking, C., Rennie, A. & Jacobson, D. (eds.). Professional Engineering Publishing, p. 239-248

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  31. Published

    Rapid and virtual prototyping and applications: Proceedings of the Fourth National Conference on (Incorporating RAPTIA (Rapid Prototyping and Tooling - Industrial Applications) State-of-the-Art Reports

    Bocking, C. E. (Editor), Rennie, A. (Editor) & Jacobson, D. M. (Editor), 2003, Professional Engineering Publishing. 330 p.

    Research output: Book/Report/Proceedings › Book

  32. 2002
  33. Published

    Injection mould tool manufacture in less than five days

    Jacobson, D., Bocking, C. & Rennie, A. E. W., 1/06/2002, 9 p. Society of Manufacturing Engineers.

    Research output: Other contribution

  34. Published

    The Fabrication of Electronic Packages from High Silicon Aluminium Alloys Using Thin Shell Electroformed (TSE) EDM Electrodes

    Rennie, A. E. W., Bennett, G., Bocking, C. & Jacobson, D., 1/05/2002, In: Transactions of the Institute of Metal Finishing. 80, 3, p. 92-96 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  35. Published

    Injection Mould Tool Manufacture in Less Than Five Days

    Jacobson, D. M., Bocking, C. E. & Rennie, A., 03/2002, RAPRA Rapid Tooling Conference 2002: Conference Proceedings. RAPRA, p. 35-43 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  36. Published

    Rapid production of microwave packaging in Silicon Aluminium by thin-shell electroforming

    Bocking, C., Jacobson, D. M. & Rennie, A. E. W., 01/2002, In: Microelectronics International. 19, 1, p. 30-32 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  37. Published

    Electroforming for Injection Moulding

    Rennie, A. E. W. & Bocking, C., 2002, In: State of the Art Report - RAPTIA European Thematic Network.

    Research output: Contribution to Journal/Magazine › Journal article

  38. Published

    Rapid Prototyping, Tooling and Manufacturing: Proc. Third National Conference on

    Rennie, A. E. W. (Editor), Jacobson, D. M. (Editor) & Bocking, C. (Editor), 2002, Professional Engineering Publishing. 173 p.

    Research output: Book/Report/Proceedings › Book

  39. 2001
  40. Published

    The Fabrication of MMC Electronic Packages using Thin Shell Electroformed (TSE) EDM Electrodes

    Bocking, C., Jacobson, D. M., Rennie, A. & Bennett, G., 10/2001. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  41. Published

    An Investigation into the Use of Spray Formed Al/Si Metal Matrix Composites for Use as Injection Mould Die Inserts

    Bocking, C., Jacobson, D. M. & Rennie, A., 09/2001, Time Compression technologies Conference 2001: Proceedings of. Rapid News Publications PLC, 22 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  42. Published

    Rapid Production of Microwave Packaging in Silicon-Aluminium by Thin-Shell Electroforming

    Bocking, C., Jacobson, D. M. & Rennie, A., 06/2001, 13th European Microelectronics and Packaging Conference & Exhibition, Proceedings of: iMAPS Strasbourg 2001, "The Millenium Conference". p. 412-415 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  43. Published

    Electroforming of Rapid Prototyping Mandrels for Electro-Discharge Machining Electrodes

    Rennie, A. E. W., Bocking, C. E. & Bennett, G. R., 19/03/2001, In: Journal of Materials Processing Technology. 110, 2, p. 186-196 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  44. 2000
  45. Published

    Electroforming of a Thermojet Master Pattern for use as an Electro-Discharge Machine Electrode

    Bocking, C., Rennie, A., Bennett, G. & Lewis, N., 10/2000, Time Compression Technologies 2000 Conference: Proceedings of. Rapid News Publications PLC, p. 151-156 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  46. Published

    Relationship Between Wall Thickness and Erosion Depth of Thin Walled Electroformed EDM Electrodes Produced from RP Models

    Bocking, C. E., Rennie, A. & Bennett, G. R., 08/2000, 11th International Solid Freeform Fabrication Symposium (SFF 2000). University of Texas at Austin, p. 469-477 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  47. Published

    Electroforming of a Stereolithography Master Pattern for use as an Electro-Discharge Machine electrode

    Rennie, A., Bocking, C. E. & Bennett, G. R., 07/2000, Proceedings of the 33rd International MATADOR Conference: Formerly The International Machine Tool Design and Research Conference. Springer-Verlag, p. 301-306 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  48. Published

    Surface Flatness Measurement in Stereolithography

    Male, J. C., Rennie, A. & Bennett, G. R., 06/2000, The Eighth International Conference on Rapid Prototyping: Proc. of. The University of Dayton, p. 111-117 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  49. Published

    Simulation and manufacture of wax toolfaces for the creation of silicone rubber tools using Magics™ RP software

    Rennie, A. & Bennett, G. R., 2000, In: International Journal of Engineering Simulation. 1, 3, p. 24-30 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  50. 1997
  51. Published

    A system for the generation of liquid metal droplets using electromotive forces

    Rennie, A. & Bennett, G. R., 09/1997, Proceedings World Congress: Manufacturing Technology Towards 2000: Incorporating the 7th International Conference on Manufacturing Engineering and the 3rd Australasian Conference on Rapid Product Development. James Cook University of North Queensland, p. 501-510 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  52. Published

    Development of a Continuous Droplet Generation System of Molten Metals using Electromotive Forces, with a View to its use in the Rapid Tooling Industry

    Rennie, A. & Bennett, G. R., 07/1997, Proceedings of the Thirty-Second International Manufacturing, Automation and Systems, Technology, Applications, Design, Organisation and Management, Research (MATADOR) Conference. p. 399-403 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  53. 1996
  54. Published

    The wear of High Speed Selective Jet Electrodeposition electrodes when used as EDM tools

    Dover, S. J., Rennie, A. & Bennett, G. R., 11/1996, Proceedings of the Second National Conference on developments in rapid prototyping and tooling. Mechanical Engineering Publications Ltd, p. 187-199 13 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  55. Published

    Rapid prototyping using electrodeposition of copper

    Dover, S. J., Rennie, A. & Bennett, G. R., 08/1996, Solid Freeform Fabrication Symposium 1996. University of Texas at Austin, p. 191-198 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Previous 1 2 3 Next

Back to top