Home > Research > Researchers > Professor Sarah Green > Publications

Research

Professor Sarah Green CEng CEnv FHEA FIMMM FWES

Visiting Researcher

51 - 92 out of 92Page size: 50
RSS feed of this list
  1. Published

    Ion beam modification of Ti6Al4V alloy for TJR

    Green, S., Boampong, D. K. & Unsworth, A., 2002, p. L68.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  2. Published

    Migration of a cemented hip joint prosthesis within a novel composite femur

    Green, S., Gregg, P., Liu, C., Watkins, N. D. & McCaskie, A. W., 2002, International conference engineers & surgeons - joined at the hip : refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. C601

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  3. Published

    AFM measurement of nanoscale topographical and material wear features

    Green, S., Elfick, A. P. & Unsworth, A., 2002, International conference engineers & surgeons - joined at the hip: refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. C601/032

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  4. Published

    The influence of radial clearance and wear testing on the tribology of alumina-alumina total hip prostheses

    Green, S., Scholes, S. C. & Unsworth, A., 2002, International conference engineers & surgeons - joined at the hip: refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. C601/037

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  5. Published

    Nanoscale wear degradation of alumina femoral head bearing surfaces assessed using an atomic force microscope

    Green, S., Scholes, S. C. & Unsworth, A., 2002, International conference engineers & surgeons - joined at the hip: refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. C601/036

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  6. Published

    On the influence of protein adsorption to phagocytosis of model polyethylene particles

    Green, S., Elfick, A. P., Birch, M. A. & McCaskie, A. W., 2002, International conference engineers & surgeons - joined at the hip : refining future strategies in total hip replacement 13-15 June 2002, Savoy Place, London, UK.. London: Institution of Mechanical Engineers, p. L27

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  7. Published

    Cytocompatibility evaluation of surface modified Ni-Ti shape memory alloy using the MTT assay

    Green, S. M., Grant, D. M. & Wood, J. V., 25/04/2000, In: Biomedical Engineering - Applications, Basis and Communications. 12, 2, p. 55-59 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  8. Published

    Pre-heating of components in cemented total hip arthroplasty

    Jafri, A. A., Green, S. M., Partington, P. F., McCaskie, A. W. & Muller, S. D., 11/2004, In: Journal of Bone and Joint Surgery, British Volume. 86B, 8, p. 1214-1219 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  9. Published

    OPTIMAL PROSTHESIS TEMPERATURE IN CEMENTED TOTAL HIP ARTHROPLASTY

    Jafri, A., Green, S. M., McCaskie, A. W., Partington, P. F. & Muller, S. D., 1/10/2006, In: Journal of Bone and Joint Surgery, British Volume. 88-B, SUPP III, p. 365 1 p.

    Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review

  10. Published

    ORTHOPAEDIC BIOPOLYMER WEAR SCREENING RIG VALIDATED AGAINST CLINICAL DATA

    Joyce, T. J., Monk, D., Thompson, P., Chiu, P., Unsworth, A. & Green, S. M., 1/10/2006, In: Journal of Bone and Joint Surgery, British Volume. 88-B, SUPP III, p. 377 1 p.

    Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review

  11. Published

    The design & development of a simulator for in vitro testing of metatarsophalangeal prostheses

    Joyce, T. J., Green, S. M. & Unsworth, A., 1/12/2004, Transactions - 7th World Biomaterials Congress. 1 p. (Transactions - 7th World Biomaterials Congress).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  12. Published

    Polymeric biomaterial wear test rig validated to ASTM F732-00 and against clinical data

    Joyce, T. J., Monk, D., Thompson, P., Chiu, P., Unsworth, A. & Green, S. M., 1/12/2004, Transactions - 7th World Biomaterials Congress. 1 p. (Transactions - 7th World Biomaterials Congress).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  13. Published

    Influence of bovine serum lubricant changeover time on the wear of PTFE biomaterial against stainless steel

    Joyce, T. J., Mendham, K., Green, S. M. & Unsworth, A., 1/12/2004, Transactions - 7th World Biomaterials Congress. 1 p. (Transactions - 7th World Biomaterials Congress).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  14. Published

    Statistical wear analysis of PA-6/UHMWPE alloy, UHMWPE and PA-6.

    Liu, C. Z., Ren, L. Q., Tong, J., Joyce, T. J., Green, S. M. & Arnell, R. D., 04/2001, In: Wear. 249, 1-2, p. 31-36 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  15. Published

    Effects of operating parameters on the lubricated wear behavior of a PA-6/UHMWPE blend: a statistical analysis.

    Liu, C. Z., Ren, L. Q., Tong, J., Green, S. M. & Arnell, R. D., 10/2002, In: Wear. 253, 7-8, p. 878-884 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  16. Published

    Surface modification of PTFE by plasma treatment

    Liu, C., Arnell, R. D., Gibbons, A. R., Green, S. M., Ren, L. & Tong, J., 06/2000, In: Surface Engineering. 16, 3, p. 215-217 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  17. Published

    Dynamic creep and mechanical characteristics of SmartSet GHV bone cement

    Liu, C., Green, S., Watkins, N., Baker, D. & McCaskie, A., 01/2005, In: Journal of Materials Science: Materials in Medicine. 16, 2, p. 153-160 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  18. Published

    Some failure modes of four clinical bone cements

    Liu, C., Green, S. M., Watkins, N. D., Gregg, P. J. & McCaskie, A. W., 1/04/2001, In: Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 215, 4, p. 359-366 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  19. Published

    Creep behavior comparison of CMW1 and palacos R-40 clinical bone cements

    Liu, C., Green, S. M., Watkins, N. D., Gregg, P. J., McCaskie, A. W. & Mccaskie, A. W., 11/2002, In: Journal of Materials Science: Materials in Medicine. 13, 11, p. 1021-1028 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  20. Published

    On the particle size and molecular weight distributions of clinical bone cements

    Liu, C. Z., Green, S. M., Watkins, N. D. & McCaskie, A. W., 08/2003, In: Journal of Materials Science Letters. 22, 16, p. 1147-1150 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  21. Published

    Co-deposition of titanium/polytetrafluoroethylene films by unbalanced magnetron sputtering

    Liu, C., Fairhurst, R. G., Ren, L. Q., Green, S. M., Tong, J. & Arnell, R. D., 15/01/2002, In: Surface and Coatings Technology. 149, 2-3, p. 143-150 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  22. Published

    A preliminary hip joint simulator study of the migration of a cemented femoral stem

    Liu, C., Green, S. M., Watkins, N. D., Gregg, P. J. & McCaskie, A. W., 02/2003, In: Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 217, 2, p. 127-135 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  23. Published

    Effect of restraint on the creep behavior of clinical bone cement

    Liu, C., Green, S. M., Watkins, N. D., Gregg, P. J. & McCaskie, A. W., 15/06/2002, In: Journal of Materials Science Letters. 21, 12, p. 959-962 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  24. Published

    On the particle size and molecular weight distributions of clinical bone cements

    Liu, C., Green, S. M., Watkins, N. D. & McCaskie, A. W., 1/05/2003, In: Journal of Materials Science Letters. 22, 9, p. 709-712 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  25. Published

    Nucleation of CdTe thin films deposited by close-space sublimation under a nitrogen ambient

    Major, J. D., Proskuryakov, Y. Y., Durose, K. & Green, S., 31/05/2007, In: Thin Solid Films. 515, 15, p. 5828-5832 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  26. Published

    Low temperature plasma-assisted chemical vapour deposition of amorphous carbon films for biomedical-polymeric substrates

    McColl, I. R., Grant, D. M., Green, S. M., Wood, J. V., Parker, T. L., Parker, K., Goruppa, A. A. & Braithwaite, N. S. J., 1/01/1994, In: Diamond and Related Materials. 3, 1-2, p. 83-87 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  27. Published

    Mechanical properties of reinforced composite materials under uniaxial and planar tension loading regimes measured using a non-contact optical method

    Milad, M., Green, S. & Ye, J., 15/10/2018, In: Composite Structures. 202, p. 1145-1154 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  28. Published

    Surface finishing techniques for SLM manufactured stainless steel 316L components

    Morton, W., Green, S., Rennie, A. & Abram, T., 10/2011, Innovative Developments in Virtual and Physical Prototyping: Proc. of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping. CRC PRESS-TAYLOR & FRANCIS GROUP, p. 503-509 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  29. Published

    The dynamic volume changes of polymerising polymethyl methacrylate bone cement

    Muller, S. D., Green, S. M. & McCaskie, A. W., 2002, In: Acta Orthopaedica Scandinavica. 73, 6, p. 684-687 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  30. Published

    A biomechanical study comparing a raft of 3.5 mm cortical screws with 6.5 mm cancellous screws in depressed tibial plateau fractures

    Patil, S., Mahon, A., Green, S., McMurtry, I. & Port, A., 06/2006, In: Knee. 13, 3, p. 231-235 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  31. Published

    The wear of metal-on-metal total hip prostheses measured in a hip simulator.

    Scholes, S. C., Green, S. M. & Unsworth, A., 06/2001, In: Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 215, 6, p. 523-530 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  32. Published

    The friction and lubrication of alumina-on-alumina total hip prostheses - The effect of radial clearance and wear testing.

    Scholes, S. C., Green, S. M. & Unsworth, A., 2001, In: Key Engineering Materials. 218-220, p. 535-540 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  33. Published

    Nanotribological characterisation of alumina femoral heads using an atomic force microscope

    Scholes, S. C., Green, S. M. & Unsworth, A., 2002, In: Key Engineering Materials. 218-220, p. 543-548 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  34. Published

    THE WEAR OF ALUMINA-ON-ALUMINA TOTAL HIP PROSTHESES

    Scholes, S. C., Green, S. M. & Unsworth, A., 1/04/2004, In: Journal of Bone and Joint Surgery, British Volume. 86-B, SUPP IV, p. 403 1 p.

    Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review

  35. Published

    Developing novel structural composites from recycled materials

    Sotayo, A., Green, S. & Turvey, G., 16/12/2014.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  36. Published

    Carpet recycling: a review of recycled carpets for structural composites

    Sotayo, A., Green, S. & Turvey, G., 04/2015, In: Environmental Technology and Innovation. 3, p. 97-107 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  37. Published

    Experimental investigation of recycled carpet composites for barrier structures

    Sotayo, A., Green, S. M. & Turvey, G. J., 04/2016.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  38. Published

    Benchmark testing and Finite Element (FE) analysis of timber fencing for replacement by novel composite materials

    Sotayo, A., Green, S. M. & Turvey, G. J., 11/07/2016, Mechcomp2 2nd International Conference on Mechanics of Composites . Ferreira, A., Neves, A., Viola, E., Tornabene, F. & Fantuzzi, N. (eds.). Bologna: Editrice Esculapio

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  39. Published

    Experimental and Finite Element (FE) modelling of timber fencing for benchmarking novel composite fencing

    Sotayo, A., Green, S. M. & Turvey, G. J., 15/12/2016, In: Composite Structures. 158, p. 44-55 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  40. Published

    Development, Characterisation and Finite Element Modelling of Novel Waste Carpet Composites for Structural Applications

    Sotayo, A., Green, S. & Turvey, G., 10/05/2018, In: Journal of Cleaner Production. 183, p. 686-697 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  41. Published

    Experimental investigation and Finite Element (FE) analysis of the load-deformation response of PVC fencing structures

    Sotayo, A., Green, S. M. & Turvey, G. J., 1/06/2019, In: structures. 19, p. 424-435 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  42. Published

    Hybrid and adhesively bonded joints with dissimilar adherends: a critical review

    Yousefi Kanani, A., Green, S., Hou, X. & Ye, J., 30/09/2021, In: Journal of Adhesion Science and Technology. 35, 17, p. 1821-1859 39 p.

    Research output: Contribution to Journal/Magazine › Review article › peer-review

Previous 1 2 Next

Back to top