Accepted author manuscript, 4.49 MB, PDF document
Available under license: CC BY: Creative Commons Attribution 4.0 International License
Final published version
Licence: CC BY: Creative Commons Attribution 4.0 International License
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Research output: Contribution to Journal/Magazine › Journal article › peer-review
}
TY - JOUR
T1 - A low-frequency, high-amplitude, torsional oscillator for studies of quantum fluids and solids
AU - Guénault, Anthony M.
AU - McClintock, Peter V. E.
AU - Poole, Malcolm
AU - Schanen, Roch
AU - Tsepelin, Viktor
AU - Zmeev, Dmitry E.
AU - Schmoranzer, David
AU - Vinen, W. F.
AU - Garg, Deepak
AU - Devi, Kalpana
PY - 2023/4/30
Y1 - 2023/4/30
N2 - We introduce a low-frequency torsional oscillator suitable for studies of quantum fluids and solids. It operates at frequencies of ∼100 Hz, achieves velocities of several cm s−1, and exhibits a quality factor of Q ≃ 3×10^4. In order to achieve such velocities at this relatively low frequency, the oscillator amplitude must exceed 100 μm, which would be impracticable for a conventional capacitor-driven device where the drive is applied parallel to the main motion and there are correspondingly large changes in the separation of the capacitor plates. For the different geometry of the oscillator that we now describe, however, the separations of both the drive and detect capacitor plates remain constant regardless of the amplitude of oscillation. We discuss its design, and report our initial tests of its performance.
AB - We introduce a low-frequency torsional oscillator suitable for studies of quantum fluids and solids. It operates at frequencies of ∼100 Hz, achieves velocities of several cm s−1, and exhibits a quality factor of Q ≃ 3×10^4. In order to achieve such velocities at this relatively low frequency, the oscillator amplitude must exceed 100 μm, which would be impracticable for a conventional capacitor-driven device where the drive is applied parallel to the main motion and there are correspondingly large changes in the separation of the capacitor plates. For the different geometry of the oscillator that we now describe, however, the separations of both the drive and detect capacitor plates remain constant regardless of the amplitude of oscillation. We discuss its design, and report our initial tests of its performance.
U2 - 10.1063/5.0146790
DO - 10.1063/5.0146790
M3 - Journal article
VL - 35
JO - Physics of Fluids
JF - Physics of Fluids
SN - 1070-6631
M1 - 045146
ER -