Rights statement: ©2020 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.
Accepted author manuscript, 709 KB, PDF document
Available under license: CC BY-NC: Creative Commons Attribution-NonCommercial 4.0 International License
Final published version
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
}
TY - GEN
T1 - High Performance Printed Electronics on Large Area Flexible Substrates
AU - Soni, Mahesh
AU - Shakthivel, Dhayalan
AU - Christou, Adamos
AU - Zumeit, Ayoub
AU - Yogeswaran, NIvasan
AU - Dahiya, Ravinder
N1 - Conference code: 4
PY - 2020/6/16
Y1 - 2020/6/16
N2 - Printed electronics has attracted significant interest in recent years due to simple, cost-effective fabrication, reduced e-waste and potential for the development of multifunctional devices over large areas. Over the years, various printing technologies have been developed to pattern flexible surfaces to develop wide range of electronic devices. A large part of the research so far has focussed on organic semiconductors based devices, even if the modest performance they offer is insufficient for several emerging applications (e. g. internet of things (IoTs), smart cities, robotics, etc.) where fast computation and communication are required. The high-performance requirements could be addressed with printed devices from high-mobility materials such as single crystal silicon (Si) and graphene. This paper presents the printing methodologies (i.e. contact and transfer printing) that are being explored for highperformance devices and circuits using nano to macro scale structures such as semiconductor nanowires (NWs), nanoribbon (NR), and ultra-thin chips (UTCs) as well as graphene. Few examples of high-performance devices obtained using contact and transfer printing are also presented.
AB - Printed electronics has attracted significant interest in recent years due to simple, cost-effective fabrication, reduced e-waste and potential for the development of multifunctional devices over large areas. Over the years, various printing technologies have been developed to pattern flexible surfaces to develop wide range of electronic devices. A large part of the research so far has focussed on organic semiconductors based devices, even if the modest performance they offer is insufficient for several emerging applications (e. g. internet of things (IoTs), smart cities, robotics, etc.) where fast computation and communication are required. The high-performance requirements could be addressed with printed devices from high-mobility materials such as single crystal silicon (Si) and graphene. This paper presents the printing methodologies (i.e. contact and transfer printing) that are being explored for highperformance devices and circuits using nano to macro scale structures such as semiconductor nanowires (NWs), nanoribbon (NR), and ultra-thin chips (UTCs) as well as graphene. Few examples of high-performance devices obtained using contact and transfer printing are also presented.
U2 - 10.1109/EDTM47692.2020.9118012
DO - 10.1109/EDTM47692.2020.9118012
M3 - Conference contribution/Paper
SN - 9781728125404
BT - 2020 4th IEEE Electron Devices Technology & Manufacturing Conference (EDTM)
PB - IEEE
T2 - IEEE Electron Devices Technology and Manufacturing (EDTM) conference
Y2 - 6 April 2020
ER -