Home > Research > Publications & Outputs > InSb-based quantum dot nanostructures for mid-i...

Electronic data

  • SPIE paper number 9919-9

    Rights statement: Author(s): P. J. Carrington; E. Repiso; Q. Lu; H. Fujita; A. R. J. Marshall; Q. Zhuang; A. Krier InSb-based quantum dot nanostructures for mid-infrared photonic devices Proc. SPIE 9919, Nanophotonic Materials XIII, 99190C (16 September 2016); doi: 10.1117/12.2236869 Copyright 2016 Society of Photo Optical Instrumentation Engineers. One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper are prohibited.

    Accepted author manuscript, 626 KB, PDF document

    Available under license: CC BY: Creative Commons Attribution 4.0 International License

Links

Text available via DOI:

View graph of relations

InSb-based quantum dot nanostructures for mid-infrared photonic devices

Research output: Contribution to Journal/MagazineJournal articlepeer-review

Published

Standard

InSb-based quantum dot nanostructures for mid-infrared photonic devices. / Carrington, Peter James; Repiso Menendez, Eva; Lu, Qi et al.
In: Proceedings of SPIE, Vol. 9919, 99190C, 16.09.2016.

Research output: Contribution to Journal/MagazineJournal articlepeer-review

Harvard

APA

Vancouver

Author

Bibtex

@article{51a6d01e17f24574bdd7c01981537df9,
title = "InSb-based quantum dot nanostructures for mid-infrared photonic devices",
abstract = "Novel InSb quantum dot (QD) nanostructures grown by molecular beam epitaxy (MBE) are investigated in order to improve the performance of light sources and detectors for the technologically important mid-infrared (2-5 μm) spectral range. Unlike the InAs/GaAs system which has a similar lattice mismatch, the growth of InSb/InAs QDs by MBE is a challenging task due to Sb segregation and surfactant effects. These problems can be overcome by using an Sb-As exchange growth technique to realize uniform, dense arrays (dot density ~1012 cm-2) of extremely small (mean diameter ~2.5 nm) InSb submonolayer QDs in InAs. Light emitting diodes (LEDs) containing ten layers of InSb QDs exhibit bright electroluminescence peaking at 3.8 μm at room temperature. These devices show superior temperature quenching compared with bulk and quantum well (QW) LEDs due to a reduction in Auger recombination. We also report the growth of InSb QDs in InAs/AlAsSb {\textquoteleft}W{\textquoteright} QWs grown on GaSb substrates which are designed to increase the electron-hole (e-h) wavefunction overlap to ~75%. These samples exhibit very good structural quality and photoluminescence peaking near 3.0 μm at low temperatures.",
author = "Carrington, {Peter James} and {Repiso Menendez}, Eva and Qi Lu and Hiromi Fujita and Marshall, {Andrew Robert Julian} and Qiandong Zhuang and Anthony Krier",
note = "Author(s): P. J. Carrington; E. Repiso; Q. Lu; H. Fujita; A. R. J. Marshall; Q. Zhuang; A. Krier InSb-based quantum dot nanostructures for mid-infrared photonic devices Proc. SPIE 9919, Nanophotonic Materials XIII, 99190C (16 September 2016); doi: 10.1117/12.2236869 Copyright 2016 Society of Photo Optical Instrumentation Engineers. One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper are prohibited. ",
year = "2016",
month = sep,
day = "16",
doi = "10.1117/12.2236869",
language = "English",
volume = "9919",
journal = "Proceedings of SPIE",
issn = "0277-786X",
publisher = "SPIE",

}

RIS

TY - JOUR

T1 - InSb-based quantum dot nanostructures for mid-infrared photonic devices

AU - Carrington, Peter James

AU - Repiso Menendez, Eva

AU - Lu, Qi

AU - Fujita, Hiromi

AU - Marshall, Andrew Robert Julian

AU - Zhuang, Qiandong

AU - Krier, Anthony

N1 - Author(s): P. J. Carrington; E. Repiso; Q. Lu; H. Fujita; A. R. J. Marshall; Q. Zhuang; A. Krier InSb-based quantum dot nanostructures for mid-infrared photonic devices Proc. SPIE 9919, Nanophotonic Materials XIII, 99190C (16 September 2016); doi: 10.1117/12.2236869 Copyright 2016 Society of Photo Optical Instrumentation Engineers. One print or electronic copy may be made for personal use only. Systematic reproduction and distribution, duplication of any material in this paper for a fee or for commercial purposes, or modification of the content of the paper are prohibited.

PY - 2016/9/16

Y1 - 2016/9/16

N2 - Novel InSb quantum dot (QD) nanostructures grown by molecular beam epitaxy (MBE) are investigated in order to improve the performance of light sources and detectors for the technologically important mid-infrared (2-5 μm) spectral range. Unlike the InAs/GaAs system which has a similar lattice mismatch, the growth of InSb/InAs QDs by MBE is a challenging task due to Sb segregation and surfactant effects. These problems can be overcome by using an Sb-As exchange growth technique to realize uniform, dense arrays (dot density ~1012 cm-2) of extremely small (mean diameter ~2.5 nm) InSb submonolayer QDs in InAs. Light emitting diodes (LEDs) containing ten layers of InSb QDs exhibit bright electroluminescence peaking at 3.8 μm at room temperature. These devices show superior temperature quenching compared with bulk and quantum well (QW) LEDs due to a reduction in Auger recombination. We also report the growth of InSb QDs in InAs/AlAsSb ‘W’ QWs grown on GaSb substrates which are designed to increase the electron-hole (e-h) wavefunction overlap to ~75%. These samples exhibit very good structural quality and photoluminescence peaking near 3.0 μm at low temperatures.

AB - Novel InSb quantum dot (QD) nanostructures grown by molecular beam epitaxy (MBE) are investigated in order to improve the performance of light sources and detectors for the technologically important mid-infrared (2-5 μm) spectral range. Unlike the InAs/GaAs system which has a similar lattice mismatch, the growth of InSb/InAs QDs by MBE is a challenging task due to Sb segregation and surfactant effects. These problems can be overcome by using an Sb-As exchange growth technique to realize uniform, dense arrays (dot density ~1012 cm-2) of extremely small (mean diameter ~2.5 nm) InSb submonolayer QDs in InAs. Light emitting diodes (LEDs) containing ten layers of InSb QDs exhibit bright electroluminescence peaking at 3.8 μm at room temperature. These devices show superior temperature quenching compared with bulk and quantum well (QW) LEDs due to a reduction in Auger recombination. We also report the growth of InSb QDs in InAs/AlAsSb ‘W’ QWs grown on GaSb substrates which are designed to increase the electron-hole (e-h) wavefunction overlap to ~75%. These samples exhibit very good structural quality and photoluminescence peaking near 3.0 μm at low temperatures.

U2 - 10.1117/12.2236869

DO - 10.1117/12.2236869

M3 - Journal article

VL - 9919

JO - Proceedings of SPIE

JF - Proceedings of SPIE

SN - 0277-786X

M1 - 99190C

ER -