Home > Research > Publications & Outputs > Mechanical properties of reinforced composite m...

Electronic data

  • 1-s2.0-S0263822318302526-main

    Rights statement: This is the author’s version of a work that was accepted for publication in Composite Structures. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Composite Structures, 202, 2018 DOI: 10.1016/j.compstruct.2018.05.070

    Accepted author manuscript, 1.33 MB, PDF document

    Available under license: CC BY-NC-ND: Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License

Links

Text available via DOI:

View graph of relations

Mechanical properties of reinforced composite materials under uniaxial and planar tension loading regimes measured using a non-contact optical method

Research output: Contribution to journalJournal articlepeer-review

Published

Standard

Mechanical properties of reinforced composite materials under uniaxial and planar tension loading regimes measured using a non-contact optical method. / Milad, Mohamed; Green, Sarah; Ye, Jianqiao.

In: Composite Structures, Vol. 202, 15.10.2018, p. 1145-1154.

Research output: Contribution to journalJournal articlepeer-review

Harvard

APA

Vancouver

Author

Bibtex

@article{b10d400c2d5a46a5b2c324a2d535e820,
title = "Mechanical properties of reinforced composite materials under uniaxial and planar tension loading regimes measured using a non-contact optical method",
abstract = "This study reports the hyperelastic material behaviour of a commercially available PVC/nitrile elastomer with woven continuous nylon reinforcement composite sheet under loading cases of uniaxial extension and pure shear achieved via wide strip tension testing. Through the novel use of an advanced non-contact optical strain measurement technique, the hyperelastic material behaviour of the composite is investigated, and materials parameters are reported for both the warp and the weft directions of reinforcement fibre alignment. The non-contact technique is used to acquire normal and shear strains at the surface of the composite sheet material when loaded to tensile strains (stretches) of up to 0.25. Directly measured shear strains are compared to those derived from the normal strain outputs of an optical rectangular strain rosette array, with both measures showing close agreement. The measured mechanical behaviour under loading is used to determine an approximate strain energy function for the composite via ABAQUS software hyperelastic materials modelling curve fitting, with the Ogden and Yeoh hyperelastic models showing reasonable agreement to experimental data.",
author = "Mohamed Milad and Sarah Green and Jianqiao Ye",
note = "This is the author{\textquoteright}s version of a work that was accepted for publication in Composite Structures. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Composite Structures, 202, 2018 DOI: 10.1016/j.compstruct.2018.05.070",
year = "2018",
month = oct,
day = "15",
doi = "10.1016/j.compstruct.2018.05.070",
language = "English",
volume = "202",
pages = "1145--1154",
journal = "Composite Structures",
issn = "0263-8223",
publisher = "Elsevier Ltd",

}

RIS

TY - JOUR

T1 - Mechanical properties of reinforced composite materials under uniaxial and planar tension loading regimes measured using a non-contact optical method

AU - Milad, Mohamed

AU - Green, Sarah

AU - Ye, Jianqiao

N1 - This is the author’s version of a work that was accepted for publication in Composite Structures. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Composite Structures, 202, 2018 DOI: 10.1016/j.compstruct.2018.05.070

PY - 2018/10/15

Y1 - 2018/10/15

N2 - This study reports the hyperelastic material behaviour of a commercially available PVC/nitrile elastomer with woven continuous nylon reinforcement composite sheet under loading cases of uniaxial extension and pure shear achieved via wide strip tension testing. Through the novel use of an advanced non-contact optical strain measurement technique, the hyperelastic material behaviour of the composite is investigated, and materials parameters are reported for both the warp and the weft directions of reinforcement fibre alignment. The non-contact technique is used to acquire normal and shear strains at the surface of the composite sheet material when loaded to tensile strains (stretches) of up to 0.25. Directly measured shear strains are compared to those derived from the normal strain outputs of an optical rectangular strain rosette array, with both measures showing close agreement. The measured mechanical behaviour under loading is used to determine an approximate strain energy function for the composite via ABAQUS software hyperelastic materials modelling curve fitting, with the Ogden and Yeoh hyperelastic models showing reasonable agreement to experimental data.

AB - This study reports the hyperelastic material behaviour of a commercially available PVC/nitrile elastomer with woven continuous nylon reinforcement composite sheet under loading cases of uniaxial extension and pure shear achieved via wide strip tension testing. Through the novel use of an advanced non-contact optical strain measurement technique, the hyperelastic material behaviour of the composite is investigated, and materials parameters are reported for both the warp and the weft directions of reinforcement fibre alignment. The non-contact technique is used to acquire normal and shear strains at the surface of the composite sheet material when loaded to tensile strains (stretches) of up to 0.25. Directly measured shear strains are compared to those derived from the normal strain outputs of an optical rectangular strain rosette array, with both measures showing close agreement. The measured mechanical behaviour under loading is used to determine an approximate strain energy function for the composite via ABAQUS software hyperelastic materials modelling curve fitting, with the Ogden and Yeoh hyperelastic models showing reasonable agreement to experimental data.

U2 - 10.1016/j.compstruct.2018.05.070

DO - 10.1016/j.compstruct.2018.05.070

M3 - Journal article

VL - 202

SP - 1145

EP - 1154

JO - Composite Structures

JF - Composite Structures

SN - 0263-8223

ER -