Manufacturing

View graph of relations

401 - 500 out of 1,001Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Publication date

2013
Published
Pneumatic fluid structure interaction of inflatable offshore fender barriers made of anisotropic hyperelastic composites
Aboshio, A., Ye, J. & Green, S., 2013, Proceedings of the 17th International Conference on Composite Structures, Porto, Portugal, 17-21 June 2013.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Research on deploying technical functional analysis for additive manufacturing of a surgical device for intravitreal interventions
Lupeanu, M., Brooks, H., Rennie, A. & Hill, D., 2013, In: Buletinul Ştiinţific al Universităţii Politehnica Bucureşti, Seria D – Inginerie Mecanică. 75, 1, p. 141-160 20 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
State dependent parameter model-based condition monitoring for wind turbines
Cross, P. & Ma, X., 2013, Proceedings of the 10th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies (CM 2013 & MFPT 2013). BINDT, 12 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Testing of pultruded GFRP materials and structures for civil engineering
Turvey, G., 2013, Advanced Composites in Civil Engineering. 1st ed. Woodhead Publishing Limited, p. 440-508 69 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review
Published
Ultimate loads, strengths, extensions and strains of pultruded GFRP single-lap, single-bolt tension joints
Turvey, G., 2013, Proceedings of the International Conference on Advanced Composites in Construction 2013. p. 357-367 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Vibration-based delamination detection in a composite plate
Ullah, I., Sinha, J. & Pinkerton, A., 2013, In: Mechanics of Advanced Materials and Structures. 20, 7, p. 536-551 16 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
2012
Unpublished
Photography and Cloud Computing enabled Replication of Historic Artefacts for fabrication via Additive Manufacturing Technology
Kaufman, J. & Rennie, A., 18/12/2012, (Unpublished).
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Unpublished
Production of fluid dynamically improved filters using additive manufacturing
Vijayakumar, B., Rennie, A. & Burns, N., 18/12/2012, (Unpublished).
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
A novel concept to develop composite structures with isotropic negative Poisson's ratio: effects of random inclusions
Hou, X., Hu, H. & Silberschmidt, V., 12/10/2012, In: Composites Science and Technology. 72, 15, p. 1848–1854 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A DXDR large deflection analysis of uniformly loaded square, circular and elliptical orthotropic plates using non-uniform rectangular finite-differences
Kadkhodayan, M., Alamatian, J., Turvey, G. & Erfani Moghadam, A., 10/2012, In: Journal of Mechanical Science and Technology. 26, 10, p. 3231-3242 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Functional analysis for the development of bio-medical products
Lupeanu, M., Neagu, C., Opran, C. & Rennie, A., 10/2012, p. 330-336. 7 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
An experimental investigation of the tensile behaviour of single-lap bolted joints in pultruded GFRP plate
Turvey, G. & Gode, J., 13/09/2012. 15 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Investigations of the state-of-the-art methods for electromagnetic NDT and electrical condition monitoring
Ma, X., 09/2012, In: Insight – Non-Destructive Testing and Condition Monitoring. 54, 9, p. 482-488 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Laser clad corrosion protection for mild and harsh environments
Mahmood, K., Stevens, N. & Pinkerton, A. J., 09/2012, In: Surface Engineering. 28, 8, p. 576-584 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Optimal sensor selection for wind turbine condition monitoring using multivariate principal component analysis approach
Wang, Y., Ma, X. & Joyce, M., 09/2012. 7 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Prediction of failure envelopes and stress–strain curves of fiber composite laminates under triaxial loads
Ye, J. & Zhang, D., 09/2012, In: Journal of Composite Materials. 46, 19-20, p. 2417-2430 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Three-Dimensional Water Vapor Visualization in Porous Packing by Near-Infrared Diffuse Transmittance Tomography
Tsaoir, M. N. A., Fernandes, D. L. A., Sa, J., Kitagawa, K., Hardacre, C. & Aiouache, F., 4/07/2012, In: Industrial and Engineering Chemistry Research. 51, 26, p. 8875-8882 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An investigation into the environmental impact of product recovery methods to support sustainable manufacturing within small and medium-sized enterprises (SMEs)
Appleby, M., Lambert, C., Rennie, A. & Buckley, A., 07/2012, Dynamic methods and process advancements in mechanical, manufacturing, and materials engineering. Davim, J. P. (ed.). Hershey, Penn.: IGI Global, p. 73-90 18 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Design for Manufacture using Functional Analysis and CAD Mould Simulation for Rapid Prototyping and Rapid Tooling: Paper: ESDA2012-82410
Lupeanu, M., Brooks, H., Rennie, A., Celik, K., Neagu, C. & Akinci, I., 07/2012, ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis (ESDA 2012): Proceedings of the . Nantes: American Society of Mechanical Engineers (ASME), 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Generic model of a community-based microgrid integrating wind turbines and photovoltaics
Ma, X., Qin, J. & Wang, Y., 07/2012, p. 3147-3153. 7 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Non-Linear Stress Analysis for the Bolt Connections of A Chisel Tine Using Finite Element Method
Celik, K., Rennie, A. & Akinci, I., 07/2012, International Conference of Agricultural Engineering (CIGR-AgEng 2012): Proceedings of the . 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Failure of single-lap single-bolt tension joints in pultruded glass fibre reinforced plate
Turvey, G., 13/06/2012. 8 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Function Based Design for Rapid Prototyping: A Medical Industry Application for an Ocular Speculum
Lupeanu, M., Brooks, H., Rennie, A., Hill, D. & Neagu, C., 06/2012, 13th Rapid Design, Prototyping & Manufacturing Conference: Proceedings of the . Bocking, C. & Rennie, A. (eds.). High Wycombe: CRDM Ltd, p. 45-53 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Laser surface modification using Inconel 617 machining swarf as coating material
Mahmood, K., Stevens, N. & Pinkerton, A. J., 06/2012, In: Journal of Materials Processing Technology. 212, 6, p. 1271-1280 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rapid Design, Prototyping and Manufacturing: Proceedings of the Thirteenth Conference on
Bocking, C. E. (Editor) & Rennie, A. (Editor), 06/2012, High Wycombe: CRDM Ltd. 109 p.
Research output: Book/Report/Proceedings › Proceedings
Published
Stress analysis of a sample marine crane’s boom under static loading condition
Celik, K., Caglayan, N., Cinar, R., Ucar, M., Ersoy, H. & Rennie, A., 06/2012, 5th International Mechanical Engineering Forum 2012: Proceedings of the . Prague, Czech Republic, p. 246-256 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A remote condition monitoring system for wind-turbine based DG systems
Ma, X., Wang, G., Cross, P. & Zhang, X., 31/05/2012, In: Journal of Physics: Conference Series. 364, 1, 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Transient distributions of composition and temperature in a gas-solid packed bed reactor by near-infrared tomography
tSaoir, M. N. A., Abreu Fernandes, D. L., McMaster, M., Kitagawa, K., Hardacre, C. & Aiouache, F., 1/05/2012, In: Chemical Engineering Journal. 189-190, p. 383-392 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A study of computational mechanics of 3D spacer fabric: factors affecting its compression deformation
Hou, X., Hu, H. & Silberschmidt, V., 05/2012, In: Journal of Materials Science. 47, 9, p. 3989–3999 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Dynamic response of metallic sandwich panles under blast loadings.
Wang, H., Zha, X. & Ye, J., 05/2012, In: International Journal of Structural Stability and Dynamics. 12, 3, p. - 23 p., 1250017.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Numerical modelling of thermally bonded nonwovens: continuous and discontinuous approaches
Demirci, E., Hou, X., Acar, M., Pourdeyhimi, B. & Silberschmidt, V., 05/2012, In: Solid State Phenomena. 188, p. 164-169 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A BIOMECHANICAL COMPARISON OF DIFFERENT SCREW CONFIGURATIONS IN DISTAL TIBIAL LOCKING PLATES
Bonner, T. J., Green, S. M. & McMurty, I. A., 1/04/2012, In: Journal of Bone and Joint Surgery, British Volume. 94-B, SUPP XXXV, p. 20 1 p.
Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review
Published
Novel early warning fault detection for wind-turbine-based DG systems
Ma, X., 5/03/2012, Proceedings of 2011 2nd IEEE PES International Conference and Exhibition on Innovative Smart Grid Technologies (ISGT Europe): 5-7 Dec. 2011, Manchester, UK. IEEE, p. 1-6 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Physical Analysis of Maximum Strength of Additive Manufactured Parts: A Case-Based Study
Hambali, R. H., Rennie, A. & McGovern, J., 03/2012, 2nd International Conference on Arts, Social Sciences & Technology: Proceedings of the . Penang, Malaysia, 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Comparison of cement pressurisation in flanged and unflanged acetabular cups
Bhattacharya, R., Attar, F. G., Green, S. & Port, A., 3/02/2012, In: Journal of Orthopaedic Surgery and Research. 7, 1, 5 p., 5.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Optimisation of Build Orientation for FDM Additive Manufactured Products
Hambali, R. H., Vaudelin, M. & Rennie, A., 02/2012, International Conference on Applications and Design in Mechanical Engineering (ICADME 2012): Proceedings of the . Perlis, Malaysia: School of Mechatronic Engineering, UniMAP, 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A comparison of laser additive manufacturing using gas and plasma-atomized Ti-6A1-4V powders
Ahsan, M. N., Pinkerton, A. J. & Ali, L., 2012, Innovative Developments in Virtual and Physical Prototyping. Bartolo, P., DeLemos, A., Tojeira, A., Pereira, A., Mateus, A., Mendes, A., DosSantos, C., Freitas, D., Bartolo, H., Almeida, H., IM, D., Dias, J., Domingos, M., Alves, N., Pereira, R., Patricio, T. & Ferreira, T. (eds.). Boca Raton: CRC PRESS-TAYLOR & FRANCIS GROUP, p. 625-633 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A GPGPU accelerated compressed sensing with tight wavelet frame transform technique for MR imaging reconstruction
Hu, B., Ma, X., Joyce, M., Glover, P. & Naleem, B., 2012, Imaging Systems and Techniques (IST), 2012 IEEE International Conference on. IEEE, p. 121-125 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A verified model of transient and residual stresses in laser direct metal deposition
Vogel, M., Khan, M., Ibarra-Medina, J., Pinkerton, A. J., N'Dri, N. & Megahed, M., 2012, Proceedings of the 31st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. Paper 304
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Additive manufacturing technology and material selection for direct manufacture of products based on computer aided design geometric feature analysis
Smith, P., Lupeanu, M. & Rennie, A., 2012, In: International Journal of Materials and Structural Integrity. 6, 2-4, p. 96-110 15 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Analysis and simulation of the effects of melt pool flow during laser deposition of a multiphase material
Khan, M., Vogel, M., Ibarra-Medina, J., Pinkerton, A. J., N'Dri, N. & Megahed, M., 2012, Proceedings of the 31st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. Paper P133
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Characterization of weld bead geometry in fibre laser butt welding of mild steel sheets by means of statistical modelling
Eghlio, R. M., Pinkerton, A. J. & Li, L., 2012, In: Lasers in Engineering. 22, 5-6, p. 281-298 18 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Design and operation of a compact 1 MeV X-band Linac
Burt, G., Ambattu, P., Lingwood, C., Abram, T., Burrows, I., Corlett, P., Goulden, A., Hartnett, T., Hindley, P., McIntosh, P. A., Middleman, K., Saveliev, Y., Smith, R. & White, C., 2012, Proceedings of LINAC2012, Tel-Aviv, Israel. p. 183-185 3 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Determination of the effect of part orientation to the strength value on additive manufacturing FDM for end-use parts by physical testing and validation via three-dimensional finite element analysis
Hambali, R. H., Smith, P. & Rennie, A., 2012, In: International Journal of Materials Engineering Innovation. 3, 3-4, p. 269-281 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Guest Editorial: The 36th MATADOR Conference 2010
Pinkerton, A. J., 2012, In: Materials and Manufacturing Processes. 27, 4, p. 363-363 1 p.
Research output: Contribution to Journal/Magazine › Editorial › peer-review
Published
Modeling of a jig sampling and its application in disc cutter tools
Yahaya, S. H., Sihombing, H., Yaakob, M. Y. & Hasib, H., 2012, In: Journal of Mechanical and Civil Engineering . 3, 2, p. 20-23 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Multi-scale modeling of the progressive damage in cross-ply laminates under thermal and mechanical loading
Yang, D., Sheng, Y. & Ye, J., 2012, In: IOP Conference Series: Materials Science and Engineering. 40, 1
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
p-i-n junction quantum dot saturable absorber mirror: electrical control of ultrafast dynamics
Zolotovskaya, S., Butkus, M., Haring, R., Able, A., Kaenders, W., Krestnikov, I. L., Livshits, D. A. & Rafailov, E. U., 2012, In: Optics Express. 20, 8, p. 9038-9045 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Progressive Collapse Evaluation of High Rise Steel Structures due to Sudden Loss of Structural Members
Stephen, D., Ye, J. & Lam, D., 2012, Advances in steel concrete composite and hybrid structures : proceedings of the 10th International Conference on Steel Concrete Composite and Hybrid Structures, 2-4 July 2012, Singapore. Liew, J. Y. R. & Lee, S. C. (eds.). Singapore: Research Publishing Services
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Shape optimization of membrane structures based on finite element simulation
Lim, C. W., Toropov, V. V. & Ye, J., 2012, Proceedings of the Eleventh International Conference on Computational Structures Technology. Topping, B. H. V. (ed.). Stirlingshire, United Kingdom: Civil-Comp Press
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Static shape control using piezoelectric actuator
Bhagate, K., Ye, J. & Singh, A., 2012, Proceedings of the International Conference on Mechanics of Nano, Micro and Macro Compsite Structures: Politecnico di Torino, 19-20 June 2012. Ferreira, A. J. M. & Carrera, E. (eds.). 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
2011
Published
Visualization of water vapour flow in a packed bed adsorber by near-infrared diffused transmittance tomography
tSaoir, M. N. A., Abreu Fernandes, D. L., Sa, J., McMaster, M., Kitagawa, K., Hardacre, C. & Aiouache, F., 15/12/2011, In: Chemical Engineering Science. 66, 24, p. 6407-6423 17 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Electromagnetic NDT and condition monitoring - A personal view
Ma, X., 21/11/2011, Proceedings of 2011 17th International Conference on Automation and Computing (ICAC’11): 10 Sept. 2011, Huddersfield, UK. IEEE, p. 266-271 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Automated variation in product design: Using visual basics.net programming language to generate product variation
Smith, P. & Rennie, A., 11/2011, Proceedings of the RAPDASA 2011 Conference. 17 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Numerical investigation of powder heating in coaxial laser metal deposition
Ibarra-Medina, J. & Pinkerton, A. J., 11/2011, In: Surface Engineering. 27, 10, p. 754-761 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Delivering Regional Eco-Innovation through Knowledge Exchange
Lambert, C. & Rennie, A., 25/10/2011. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Experimental evaluation of bolt pull-through in pultruded glass-fibre-reinforced polymer plate
Turvey, G. J., 10/2011, In: Proceedings of the ICE - Structures and Buildings. 164, 5, p. 307-319 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Flexure of pultruded glass-fibre-reinforced polymer beams with bonded splice joints
Turvey, G. J., 10/2011, In: Proceedings of the ICE - Structures and Buildings. 164, 5, p. 333-344 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Surface finishing techniques for SLM manufactured stainless steel 316L components
Morton, W., Green, S., Rennie, A. & Abram, T., 10/2011, Innovative Developments in Virtual and Physical Prototyping: Proc. of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping. CRC PRESS-TAYLOR & FRANCIS GROUP, p. 503-509 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Variable fused deposition modelling: analysis of benefits, concept design and tool path generation
Brooks, H., Rennie, A., Abram, T., McGovern, J. & Caron, F., 10/2011, Innovative Developments in Virtual and Physical Prototyping: Proceedings of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping. CRC PRESS-TAYLOR & FRANCIS GROUP, p. 511-517 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A comparative study of laser direct metal deposition characteristics using gas and plasma-atomized Ti-6Al-4V powders
Ahsan, M. N., Pinkerton, A. J., Moat, R. J. & Shackleton, J., 25/09/2011, In: Materials Science and Engineering: A. 528, 25-26, p. 7648-7657 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Pultruded GFRP continuus beams - comparison of flexural test data with analysis predictions
Turvey, G., 6/09/2011, p. 470-481.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Determination of flow parameters through CFD analysis for agricultural irrigation equipment: a case study for a mini valve
Celik, K., Rennie, A., Karayel, D. & Akinci, I., 09/2011, In: Journal of Agricultural Machinery Science. 7, 3, p. 231-239 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Determination of flow parameters through CFD analysis for agricultural irrigation equipment: a case study for a mini valve
Celik, H. K., Rennie, A., Karayel, D. & Akinci, I., 09/2011, p. 59. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Opportunities offered by additive manufacturing in creative businesses: informing designers
Anthony, R., Evans, M., Rennie, A. & Kirby, E., 09/2011, 13th International Conference on Engineering & Product Design Education (EPDE 11). p. 623-628 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Dynamic simulation of crack initiation and propagation in cross-ply laminates by DEM
Yang, D., Sheng, Y., Ye, J. & Tan, Y., 28/07/2011, In: Composites Science and Technology. 71, 11, p. 1410-1418 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An analytical-numerical model of laser direct metal deposition track and microstructure formation
Ahsan, M. N. & Pinkerton, A. J., 07/2011, In: Modelling and Simulation in Materials Science and Engineering. 19, 5, p. - 22 p., 055003.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Geometry Optimisation of Tools used in Milling of Spherical Surfaces
Neagu, C., Lupeanu, M. & Rennie, A., 07/2011, SIM2011 - Sustainable Intelligent Manufacturing : Proceedings of the 1st International Conference on Sustainable Intelligent Manufacturing. Bartolo, H. (ed.). Leiria, Portugal, p. 87-94 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Sizing Optimisation of a Subsoiler Framework using Advanced Engineering Tools
Celik, K., Rennie, A., Topakci, M. & Akinci, I., 07/2011, Proceedings of the XXXIV CIOSTA CIGR V Conference 2011: Efficient and safe production processes in sustainable agriculture and forestry. 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A Basic Design-Build-Test Experience: Model Wind Turbine using Additive Manufacture
Widden, M., Rennie, A., Quayle, S. & Gunn, K., 23/06/2011, Conference proceedings 7th International CDIO Conference, Technical University of Denmark, 20th – 22nd June 2011. Technical University of Denmark, p. 1039-1048 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Additive manufacturing technologies and functional analysis used in product development optimization
Lupeanu, M., Rennie, A. & Neagu, C., 06/2011, Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 105-112 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Deformation simulation of additive manufacturing FDM parts: a case study for greenhouse clips
Celik, H. K., Hambali, R. H., Rennie, A. & Akinci, I., 06/2011, Rapid Design Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 155-162 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Optimisation of build orientation for FDM additive manufactured products
Hambali, R. H., Vaudelin, M. & Rennie, A., 06/2011.
Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review
Published
Polarities of function and form using additive manufacturing - where the middle ground might be in achieving a creative balance for SMEs
Kaufman, J., Rennie, A. & Quayle, S., 06/2011, Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 135-143 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on
Rennie, A. (Editor) & Bocking, C. E. (Editor), 06/2011, CRDM Ltd. 203 p.
Research output: Book/Report/Proceedings › Book
Published
Redesign of custom-fitted surgical guide with targeted functional analysis fabricated via SLM
Lupeanu, M., Rennie, A., Eggbeer, D. & Neagu, C., 06/2011, Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 173-181 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Variable Fused Deposition Modelling – Concept Design and Tool Path Generation
Brooks, H., Rennie, A., Abram, T., McGovern, J. & Caron, F., 06/2011, Rapid Design, Prototyping and Manufacturing: Proc Twelfth Conference on. p. 113-122 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Deformation behaviour simulation of an apple under drop case by finite element method
Celik, H. K., Rennie, A. & Akinci, I., 05/2011, In: Journal of Food Engineering. 104, 2, p. 293-298 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Microcomputed tomography analysis of intralayer porosity generation in laser direct metal deposition and its causes
Ahsan, M. N., Bradley, R. & Pinkerton, A. J., 05/2011, In: Journal of Laser Applications. 23, 2, p. - 10 p., 022009.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Online intelligent condition monitoring of electrical machines.
Ma, X., 05/2011, p. 223-228. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
The influence of profiled sheeting thickness and shear connector's position on strength and ductility of headed shear connector
Qureshi, J., Lam, D. & Ye, J., 05/2011, In: Engineering Structures. 33, 5, p. 1643-1656 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Porous structures fabrication by continuous and pulsed laser metal deposition for biomedical applications; modelling and experimental investigation
Ahsan, M. N., Paul, C. P., Kukreja, L. M. & Pinkerton, A. J., 1/04/2011, In: Journal of Materials Processing Technology. 211, 4, p. 602-609 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An investigation into the environmental impact of product recovery methods to support sustainable manufacturing within small and medium-sized enterprises (SMEs)
Appleby, M., Lambert, C., Rennie, A. & Buckley, A., 04/2011, In: International Journal of Manufacturing, Materials, and Mechanical Engineering (IJMMME). 1, 2, p. 1-18 18 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of shear connector spacing and layout on the shear connector capacity in composite beams
Qureshi, J., Lam, D. & Ye, J., 04/2011, In: Journal of Constructional Steel Research. 67, 4, p. 706-719 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Second-harmonic conical refraction: observation of free and forced harmonic waves
Zolotovskaya, S., Abdolvand, A., Kalkandjiev, T. K. & Rafailov, E. U., 04/2011, In: Applied Physics B. 103, 1, p. 9-12 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Residual stresses in laser direct metal deposited Waspaloy
Moat, R. J., Pinkerton, A. J., Li, L., Withers, P. J. & Preuss, M., 15/03/2011, In: Materials Science and Engineering: A. 528, 6, p. 2288-2298 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rapid prototyping and flow simulation applications in design of agricultural irrigation equipment: Case study for a sample in-line drip emitter: The paper is to study CFD and RP application samples on the design issues associated with agricultural irrigation equipment
Celik, K., Karayel, D., Caglayan, N., Rennie, A. & Akinci, I., 03/2011, In: Virtual and Physical Prototyping. 6, 1, p. 47-56 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Screening wall effects of a thin fluidized bed by near-infrared imaging
Aiouache, F., tSaoir, M. N. A. & Kitagawa, K., 15/02/2011, In: Chemical Engineering Journal. 167, 1, p. 288-296 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Fibre laser welding of dissimilar alloys of Ti-6Al-4V and Inconel 718 for aerospace applications
Chen, H.-C., Pinkerton, A. J. & Li, L., 02/2011, In: International Journal of Advanced Manufacturing Technology. 52, 9-12, p. 977-987 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Finite element simulation of low-density thermally bonded nonwoven materials: effects of orientation distribution function and arrangement of bond points
Hou, X., Acar, M. & Silberschmidt, V., 02/2011, In: Computational Materials Science. 50, 4, p. 1292–1298 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Gap-free fibre laser welding of Zn-coated steel on Al alloy for light-weight automotive applications
Chen, H.-C., Pinkerton, A. J., Li, L., Liu, Z. & Mistry, A. T., 02/2011, In: Materials and Design. 32, 2, p. 495-504 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Innovative reconsolidation of carbon steel machining swarf by laser metal deposition
Mahmood, K., Syed, W. U. H. & Pinkerton, A. J., 02/2011, In: Optics and Lasers in Engineering. 49, 2, p. 240-247 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Modeling progressive delamination of laminated composites by discrete element method
Yang, D., Ye, J., Tan, Y. & Sheng, Y., 01/2011, In: Computational Materials Science. 50, 3, p. 858-864 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Non-uniformity of deformation in low-density thermally point bonded non-woven material: effect of microstructure
Hou, X., Acar, M. & Silberschmidt, V., 01/2011, In: Journal of Materials Science. 46, 2, p. 307–315 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A CFD model of laser cladding: From deposition head to melt pool dynamics
Ibarra-Medina, J., Vogel, M. & Pinkerton, A. J., 2011, Proceedings of the 30th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 378-386 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
An integrated model of laser clad formation using CFD and FE methods
Vogel, M., Ibarra-Medina, J., N'Dri, N. & Pinkerton, A. J., 2011, Surface modification technologies XXV : Proceedings of the 25th International Conference on Surface Modification Technologies. Sudarshan, T. S. & Nylen, P. (eds.). India: Valardocs
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Bolted joints in pultruded glass fibre reinforced polymer (GFRP) composites
Turvey, G., 2011, Composite joints and connections: principles, modelling and testing. Camanho, P. & Tong, L. (eds.). Cambridge: Woodhead Publishing Limited, p. 77-111 35 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Buckling behaviour of concrete- filled elliptical steel columns
Lam, D., Dai, X., Jamaluddin, N. & Ye, J., 2011, 7th International Conference on Steel & Aluminium Structures (ICSAS2011), Kuching, Sarawak, Malaysia. Ho, L. H. (ed.).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Effects of Shear Connector's Position in Profiled Sheeting on Strength and Ductility.
Lam, D., Qureshi, J. & Ye, J., 2011, 5th International Conference on Steel & Composite Structures, Seoul, Korea..
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Finite Element Modelling of Slender Concrete Filled Elliptical Steel Columns
Lam, D., Dai, X., Ye, J. & Jamaluddin, N., 2011, EUROSTEEL 2011, Budapest, Hungary. .
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Previous 1 2 3 4 5 6 7 8 ...11 Next

Research

Manufacturing

Quick Links

Connect With Us