Structures, Materials and Manufacturing

View graph of relations

151 - 200 out of 969Page size: 50

RSS feed of this list

Sort by: Publication date

2019
Published
Sensitivity Studies on Offshore Submarine Hoses on CALM Buoy with Comparisons for Chinese‑Lantern and Lazy‑S Configuration: OMAE2019‑96755
Wang, F., Amaechi, C. V., Hou, X. & Ye, J., 10/06/2019.
Research output: Contribution to conference - Without ISBN/ISSN › Other › peer-review
Published
Effect of supercritical carbonation on the strength and heavy metal retention of cement-solidified fly ash
Zha, X., Ning, J., Saafi, M., Dong, L., Dassekpo, J-BM. & Ye, J., 1/06/2019, In: Cement and Concrete Research. 120, p. 36-45 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Experimental investigation and Finite Element (FE) analysis of the load-deformation response of PVC fencing structures
Sotayo, A., Green, S. M. & Turvey, G. J., 1/06/2019, In: structures. 19, p. 424-435 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Social Design Fiction. New Methods for the Design of Emerging Technology.
Pilling, M., Richards, D., Dunn, N. & Rennie, A., 31/05/2019, In: The Design Journal. 22, sup1, p. 1993-2005 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Requirements for large-scale adoption of rapid manufacturing technologies
Hasan, S., Rennie, A., Hoque, M. R. & Ahmed, N., 24/05/2019, In: Cogent Business & Management. 6, 1, 22 p., 1623151.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Minimal Waste Galvonometer Field Correction for Additive Manufacturing
King, B., Bennett, G. R. & Rennie, A., 5/04/2019, 16th Rapid Design, Prototyping & Manufacturing Conference (RDPM2019): Proceedings of the. Rennie, A., Pei, E. & Hackney, P. (eds.). 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Multivariable Regression Analysis for Optimised Mass Calculation of MEX 3D Printed Parts
Doicin, C-V., Ulmeanu, M-E., Rennie, A. & Lupeanu, E., 5/04/2019, 16th Rapid Design, Prototyping & Manufacturing Conference (RDPM2019). Rennie, A., Pei, E. & Hackney, P. (eds.). 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Repurposing of metal support structures to form powder for use in additive manufacturing
Powell, D., Rennie, A., Molyneux, A., Burns, N. & Geekie, L., 5/04/2019, 16th Rapid Design, Prototyping & Manufacturing Conference (RDPM2019): Proceedings of the. Rennie, A., Pei, E. & Hackney, P. (eds.). 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Novel engineered high performance sugar beetroot 2D nanoplatelet-cementitious composites
Hasan, H., Huang, B., Saafi, M. B. S., Sun, J., Chi, Y., Eric Whale, Hepworth, D. & Ye, J., 30/03/2019, In: Construction and Building Materials. 202, p. 546-562 17 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A multi-scale model for studying failure mechanisms of composite wind turbine blades
Ye, J., Chu, C., Cai, H., Hou, X., Shi, B., Tian, S., Chen, X. & Ye, J., 15/03/2019, In: Composite Structures. 212, p. 220-229 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Composite risers for deep waters using a numerical modelling approach
Amaechi, C. V., Gillett, N., Odijie, A. C., Hou, X. & Ye, J., 15/02/2019, In: Composite Structures. 210, p. 486-499 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An evaluation of modelling approaches and column removal time on progressive collapse of building
Stephen, D., Lam, D., Forth, J., Ye, J. & Tsavdaridis, K. D., 1/02/2019, In: Journal of Constructional Steel Research. 153, p. 243-253 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Strength of submarine hoses in Chinese-lantern configuration from hydrodynamic loads on CALM buoy
Amaechi, C. V., Facheng Wang, Hou, X. & Ye, J., 1/01/2019, In: Ocean Engineering. 171, p. 429-442 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Engineered novel multifunctional hybrid nanofiber reinforcement for improving the flexural strength and fracture of cementitious composites for sustainable concrete
Hasan, H., 2019, Lancaster University. 286 p.
Research output: Thesis › Doctoral Thesis
2018
Published
Improved Tracheostomy Device
Laha, S., Adiele, A. C., Brewer, D., Ntelis, T., Pitman, S., Rennie, A. & Sheikh, Y., 8/11/2018, IPC No. A61M 16/04 (2006.01), Patent No. PCT/GB2018/051193, 3/05/2018, Priority date 3/05/2017, Priority No. 1707060.8
Research output: Patent
Published
Determination of Time Dependent Stress Distribution on a Potato Tuber during Drop Case
Caglayan, N., Oral, O., Celik, H. K., Cinar, R., Rodrigues, L. C. D. A., Rennie, A. E. W. & Akinci, I., 11/2018, In: Journal of Food Process Engineering. 41, 7, 7 p., e12869.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A model for predicting smoke back-layering length in tunnel fires with the combination of longitudinal ventilation and point extraction ventilation in the roof
Wang, J., Yuan, J., Fang, Z., Tang, Z., Qian, P. & Ye, J., 1/10/2018, In: Tunnelling and Underground Space Technology. 80, p. 16-25 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Determination of the Failure Susceptibility of a Flat Die used in Biomass Pelletizing Machines by means of FEA based Design Exploration
Celik, H. K., Yilmaz, H., Rennie, A. E. W., Cinar, R. & Firat, M. Z., 10/2018, In: Journal of Failure Analysis and Prevention. 18, 5, p. 1099-1110 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A unified interaction equation for strength and global stability of solid and hollow concrete-filled steel tube columns under room and elevated temperatures
Yu, M., Xu, H., Ye, J. & Chi, Y., 1/09/2018, In: Journal of Constructional Steel Research. 148, p. 304-313 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Maximum energy conversion from human motion using piezoelectric flex transducer: A multi-level surrogate modeling strategy
Luo, L., Liu, D., Zhu, M. & Ye, J., 1/09/2018, In: Journal of Intelligent Material Systems and Structures. 29, 15, p. 3097-3107 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Underwater Cutting of Metals with Photons
Cheneler, D., Pinkerton, A., Khan, A. & Nyamayaro, C., 3/07/2018.
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
A Short Review on 4D Printing
Khan, F., Celik, H. K., Oral, O. & Rennie, A. E. W., 07/2018, In: International Journal of 3D Printing Technologies and Digital Industry. 2, 2, p. 59-67 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
University Brand Management through Additive Manufacturing Applications
Doicin, C-V., Ulmeanu, M-E., Abram, T. N., Rennie, A. E. W., Cîtu, D., Murzac, R., Tunsoiu, N. & Bărbării, N., 1/06/2018, Proceedings of the 31st IBIMA Conference. Milan, Italy, p. 6716-6727 12 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Offshore applications of Composite marine risers and submarine hoses in deep waters
Amaechi, C. V. & Ye, J., 29/05/2018, Composite marine risers and submarine hose applications for deep waters. Lancaster University, (20 Minutes Talk, Engineering Department).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Development, Characterisation and Finite Element Modelling of Novel Waste Carpet Composites for Structural Applications
Sotayo, A., Green, S. & Turvey, G., 10/05/2018, In: Journal of Cleaner Production. 183, p. 686-697 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Numerical design of Novel Composite risers for deep water applications
Amaechi, C. V. & Ye, J., 5/05/2018.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
A Short Review on 4D Printing
Khan, F., Celik, H. K., Oral, O. & Rennie, A. E. W., 04/2018, 3rd International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry 2018. Çetinkaya, K., Özsoy, K., Duman, B. & Kayaalp, K. (eds.). Antalya, Turkey, p. 199-203 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract
Published
New Methodology for Optimal Placement of Piezoelectric Sensor/Actuator Pairs for Active Vibration Control of Flexible Structures
Daraji, A. H., Hale, J. M. & Ye, J., 2018, In: Journal of Vibration and Acoustics. 140, 1, 13 p., 011015.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Replication and fabrication of crafted and natural artifacts by reverse engineering using single camera photogrammetry
Kaufman, J., 2018, Lancaster University. 486 p.
Research output: Thesis › Doctoral Thesis
2017
Published
A Numerical Modeling Approach of Composite Riser Hoses
Amaechi, C. V. & Ye, J., 19/12/2017.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
First accelerator test of vacuum components with laser-engineered surfaces for electron-cloud mitigation
Calatroni, S., Valdivieso, E. G-T., Neupert, H., Nistor, V., Fontenla, A. T. P., Taborelli, M., Chiggiato, P., Malyshev, O., Valizadeh, R., Wackerow, S., Zolotovskaya, S., Gillespie, W. A. & Abdolvand, A., 20/11/2017, In: Physical Review Accelerators and Beams. 20, 11, 12 p., 113201.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Spatially Resolved Operando Measurements in Heterogeneous Catalytic Reactors, Volume 50: Imaging Gas Flow in Gas–Solid Catalytic Systems by Near-Infrared Tomography
Aiouache, F., 17/11/2017, Spatially Resolved Operando Measurements in Heterogeneous Catalytic Reactors. Dixon, A. & Deutschmann, O. (eds.). Academic Press, p. 203-280 78 p. (Advances in Chemical Engineering; vol. 50).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Experimental research on influence of multi-level loading on axial compression behavior of concrete-filled circular steel tubular short columns
Tong, D., Yu, M., Bao, H. & Ye, J., 1/11/2017, In: Jianzhu Jiegou Xuebao/Journal of Building Structures. 38, p. 241-248 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Metamodel-assisted design optimization of piezoelectric flex transducer for maximal bio-kinetic energy conversion
Luo, L., Liu, D., Zhu, M. & Ye, J., 1/11/2017, In: Journal of Intelligent Material Systems and Structures. 28, 18, p. 2528-2538 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
New Tracheostomy Device Concept: An Additive Manufacturing Challenge in Reducing Late Clinical Complications
Ulmeanu, M-E., Ulmeanu, L., Doicin, C-V., Rennie, A. E. W. & Lupeanu, E., 11/2017, Proceedings of the 30th International Business Information Management Association Conference: Vision 2020: Sustainable Economic development, Innovation Management, and Global Growth. Soliman, K. S. (ed.). Madrid, Spain: International Business Information Management Association (IBIMA), p. 2611-2622 12 p. #538
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Nonlinear FEM based high-speed shell shattering simulation for shelled edible agricultural products: Pecan fruit shattering
Celik, H. K., Caglayan, N. & Rennie, A. E. W., 10/2017, In: Journal of Food Process Engineering. 40, 5, 8 p., e12520.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A numerical modeling approach of composite risers for deep waters
Amaechi, C. V. & Ye, J., 8/09/2017, ICCS20 20th International Conference on Composite Structures. Ferreira, A. J. M., Larbi, W., Deu, J-F., Tornabene, F. & Fantuzzi, N. (eds.). Societa Editrice Esculapio, p. 262-263 2 p. (Structural and Computational Mechanics Book Series).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract
Published
Effects of Lap Thickness and Joint Geometry on Failure of Pultruded Composite Single-Lap Bolted Tension Joints
Turvey, G. J. & Assassa, J., 5/09/2017, p. 23-28. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Engineering FEA Sintering Model Development for Metal Supported SOFC
Chatzimichail, R., Dawson, R. J., Green, S. M., Sullivan, D., Mukerjee, S. & Selby, M., 23/07/2017, In: ECS Transactions. 78, 1, p. 2773-2783 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Wave induced stress profile on a paired column semisubmersible hull formation for column reinforcement
Odijie, C., Quayle, S. D. & Ye, J., 15/07/2017, In: Engineering Structures. 143, p. 77-90 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Electro-mechanical dynamics of spiral waves in a discrete 2D model of human atrial tissue
Brocklehurst, P., Ni, H., Zhang, H. & Ye, J., 16/05/2017, In: PLoS ONE. 12, 5, 21 p., e0176607.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Modeling and Characterization of Novel Deepwater Marine Risers
Amaechi, C. V. & Ye, J., 6/05/2017.
Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review
Published
Comparison of Galvanometer and Polygon Scanning Systems on Component Production Rates in Selective Laser Sintering
King, B., Rennie, A. E. W. & Bennett, G. R., 27/04/2017. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Time-Dependant Human Mastication Simulation of Agricultural Products and Its Rapid Prototyping Aided Evaluation: A Case Study for Pecan Kernel Mastication
Celik, H. K., Rennie, A. E. W., Er, K., Abram, T. N. & Akinci, I., 27/04/2017. 10 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Utilising Multi-Material PolyJet Additive Manufacturing for the Design and Fabrication of Prototype Flood Protection Door Seals
Walsh, S. M. R., Rennie, A. E. W., Abram, T. N., Snape, M. & Roberts, L., 27/04/2017. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Design and structural optimisation of a tractor mounted telescopic boom crane
Celik, H. K., Rennie, A. E. W. & Akinci, I., 03/2017, In: Journal of the Brazilian Society of Mechanical Sciences and Engineering. 39, 3, p. 909-924
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Reverse engineering approach for precise measurement of the physical attributes related to the geometric features of agricultural products
Celik, H. K., Rennie, A. E. W. & Akinci, I., 03/2017, In: Journal of Food Measurement and Characterization. 11, 1, p. 75-84 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Editorial: Rapid Design, Prototyping and Manufacturing
Bibb, R. & Rennie, A. E. W., 01/2017, In: International Journal of Rapid Manufacturing. 6, 2-3, p. 95-96 2 p.
Research output: Contribution to Journal/Magazine › Editorial › peer-review
Unpublished
A DEM for visualising damage evolution and predicting failure of composite lamina under uniaxial and biaxial loads
Ismail, Y., 2017, (Unpublished) Lancaster University. 177 p.
Research output: Thesis › Doctoral Thesis
2016
Published
Characterization Behaviour of Novel Composite Deepwater Risers
Amaechi, C. V. & Ye, J., 20/12/2016.
Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review

Previous 1 2 3 4 5 6 7 8 ...20 Next

Research

Structures, Materials and Manufacturing

Quick Links

Connect With Us