Allan Rennie - Publications & Outputs - Research Portal

Professor Allan Rennie

Professor in Manufacturing Engineering & Director of Engagement

1 - 100 out of 244Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Author last name

Published
Multi-step electrochemical polishing of additively manufactured 316L stainless steel components
Zhu, H., Tian, Y. & Rennie, A., 16/09/2021. 1 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
Published
Two-Steps Electrochemical Polishing of Laser Powder Bed Fusion 316L Stainless Steel
Zhu, H., Rennie, A., Li, R. & Tian, Y., 31/12/2022, In: Surfaces and Interfaces. 35, 12 p., 102442.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Viscous Layer Formation in Electrochemical Polishing Laser-Powder Bed Fusion Parts with Different Surface Profiles
Zhu, H., Tian, Y. & Rennie, A., 30/07/2023, Springer Tracts in Additive Manufacturing: Proceedings of CASICAM 2022. Zarbane, K. & Beidouri, Z. (eds.). Cham: Springer Nature, p. 219-228 10 p. (Springer Tracts in Additive Manufacturing).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review
Published
Additively manufactured foamed polylactic acid for lightweight structures
Yousefi Kanani, A., Rennie, A. & Rahim, S. Z. B. A., 2/01/2023, In: Rapid Prototyping Journal. 29, 1, p. 50-66 17 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Potential of New Sustainable Green Geopolymer Metal Composite (GGMC) Material as Mould Insert for Rapid Tooling (RT) in Injection Moulding Process
Yin, A. T. M., Rahim, S. Z. B. A., Abdullah, M. M. A. B., Nabiałek, M., Abdellah, A. E.-H., Rennie, A., Tahir, M. F. M. & Titu, A. M., 19/02/2023, In: Materials. 16, 4, 38 p., 1724.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The development of an innovative SME-focused toolset integrating carbon footprint calculation with lean manufacturing waste reduction techniques
Wrigley, S., Lambert, C. & Rennie, A., 08/2008. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
Unpublished
The SME Carbon Game: Issues faced when developing a Carbon Footprint Toolkit for SMEs
wrigley, S., Lambert, C. & Rennie, A., 06/2008, (Unpublished). 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
Use of FDM in an undergraduate student project: design, build and test a model wind turbine
Widden, M., Gunn, K. & Rennie, A., 09/2010, 3rd International Conference on Additive Technologies (iCAT 2010); DAAAM Specialized Conference. DAAAM International, 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
A Basic Design-Build-Test Experience: Model Wind Turbine using Additive Manufacture
Widden, M., Rennie, A., Quayle, S. & Gunn, K., 23/06/2011, Conference proceedings 7th International CDIO Conference, Technical University of Denmark, 20th – 22nd June 2011. Technical University of Denmark, p. 1039-1048 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Utilising Multi-Material PolyJet Additive Manufacturing for the Design and Fabrication of Prototype Flood Protection Door Seals
Walsh, S. M. R., Rennie, A. E. W., Abram, T. N., Snape, M. & Roberts, L., 27/04/2017. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Unpublished
Production of fluid dynamically improved filters using additive manufacturing
Vijayakumar, B., Rennie, A. & Burns, N., 18/12/2012, (Unpublished).
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
How additive manufacturing helps in reducing power consumption in pumps
Vijayakumar, B., Rennie, A., Burns, N., Burns, M., Travis, D. & Battersby, P., 9/08/2013.
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
Using additive manufacturing to build energy efficient filter supports
Vijayakumar, B., Rennie, A., Burns, N., Burns, M., Travis, D. & Battersby, P., 10/2013. 9 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Introducing functionality to filter media
Vijayakumar, B., Rennie, A., Burns, N., Burns, M., Travis, D. & Battersby, P., 6/11/2013. 10 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Introducing functionality to filter media
Vijayakumar, B., Rennie, A., Burns, N., Travis, D. & Battersby, P., 10/2014, In: Filtration. 14, 4, p. 217-222 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Comparative evaluation of optimum additive manufacturing technology to fabricate medical bespoke prototypes obtained with composite materials
Ulmeanu, M., Doicin, C., Baila, D., Rennie, A. E. W., Neagu, C. & Laha, S., 03/2015, In: Revista de Materiale Plastice. 52, 3, p. 416-422 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
New Tracheostomy Device Concept: An Additive Manufacturing Challenge in Reducing Late Clinical Complications
Ulmeanu, M.-E., Ulmeanu, L., Doicin, C.-V., Rennie, A. E. W. & Lupeanu, E., 11/2017, Proceedings of the 30th International Business Information Management Association Conference: Vision 2020: Sustainable Economic development, Innovation Management, and Global Growth. Soliman, K. S. (ed.). Madrid, Spain: International Business Information Management Association (IBIMA), p. 2611-2622 12 p. #538
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
TecHUB 4.0 - Technology and Entrepreneurship Education for Bridging the Gap in Smart Product Development
Ulmeanu, M., Doicin, C., Roșca, L., Rennie, A., Abram, T. & Bajdor, P., 21/08/2019, MATEC Web of Conferences. Bondrea, I., Cofaru, N. F. & Intă , M. (eds.). Sibiu, Romania: EDP Sciences, Vol. 290. 9 p. 13012
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Study regarding the influence of material type on economic objectives in MEx fabrication
Ulmeanu, M.-E., Doicin, C.-V., Roșca, L., Rennie, A., Abram, T. & Nuță, A.-B., 4/08/2021, In: MATEC Web of Conferences. 343, 11 p., 02009.
Research output: Contribution to Journal/Magazine › Conference article › peer-review
Published
Structural optimisation of a subsoiler
Topakci, M., Celik, H. K., Canakci, M., Karayel, D. & Rennie, A., 09/2010, In: Pakistan Journal of Scientific and Industrial Research. 53, 5, p. 281-287 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Deep tillage tool optimization by means of finite element method: Case study for a subsoiler tine
Topakci, M., Celik, H. K., Canakci, M., Rennie, A., Akinci, I. & Karayel, D., 04/2010, In: Journal of Food, Agriculture and Environment. 8, 2, p. 531-536 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
From Concept to Manufacture: Effective use of CAD and FEA Without Compromising Design Intent
Taylor, S. M., Rennie, A. E. W., Quayle, S. & Rawcliffe, N., 10/06/2005, Rapid Design, Prototyping and Manufacture: Proc. Sixth National Conference on . Rennnie, A., Jacobson, D. & Bocking, C. (eds.). X-CD Technologies Inc, p. 101-107 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Effect of wind loading on low rise buildings using finite element modelling and computational fluid dynamics: A commercially focused appoach
Taylor, S., Rennie, A. & McDonald, W., 2007, Virtual and Rapid Manufacturing: Advanced Research in Virtual and Rapid Prototyping. Bartolo, P. J. D. S. (ed.). London: Taylor & Francis Group, p. 811-816 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Computer aided material selection for additive manufacturing materials
Smith, P. & Rennie, A., 12/2010, In: Virtual and Physical Prototyping. 5, 4, p. 209-213 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Development of an Additive Layer Manufacturing (ALM) selection tool for direct manufacture of products
Smith, P. & Rennie, A., 08/2008, Solid Freeform Fabrication Symposium 2008. University of Texas at Austin, p. 507-518 12 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Unpublished
Rapid Manufacturing Design Scenarios
Smith, P. & Rennie, A., 12/2007, (Unpublished). 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
Using additive manufacturing effectively: a CAD tool to support decision making
Smith, P. & Rennie, A., 07/2010, 36th International MATADOR Conference. Hinduja, S. & Li, L. (eds.). Springer-Verlag, p. 381-384 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Development of an Additive Layer Manufacturing Selection Tool for Rapid Manufacturing Applications
Smith, P. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 69-79 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Computer Aided Material Selection (CAMS) for Additive Manufacturing Materials
Smith, P. & Rennie, A., 06/2010, 11th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Jacobson, D., Rennie, A. & Bocking, C. (eds.). High Wycombe: CRDM Ltd, p. 55-61 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Additive manufacturing technology and material selection for direct manufacture of products based on computer aided design geometric feature analysis
Smith, P., Lupeanu, M. & Rennie, A., 2012, In: International Journal of Materials and Structural Integrity. 6, 2-4, p. 96-110 15 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Unpublished
Rapid Manufacturing Design Tools
Smith, P. & Rennie, A., 12/2008, (Unpublished). 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
A Computer Aided Design (CAD) support tool for parametric design of products for Rapid Manufacture (RM)
Smith, P. & Rennie, A., 10/2009, 4th International Conference on Advanced Research in Virtual and Rapid Prototyping: Proceedings of the . Leiria, Portugal: Taylor & Francis Group, p. 95-100 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Assistive CAD Tools: A Review of Automated Design Methods within Computer Aided Design
Smith, P. & Rennie, A., 06/2009, Rapid Design, Prototyping and Manufacturing: Proceedings of the Tenth National Conference on . Rennie, A., Bocking, C. & Jacobson, D. (eds.). High Wycombe: MJA Print, p. 17-25 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Automated variation in product design: Using visual basics.net programming language to generate product variation
Smith, P. & Rennie, A., 11/2011, Proceedings of the RAPDASA 2011 Conference. 17 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
SME expectations and experiences
Seward, D., Quayle, S., Rennie, A. & Taylor, S., 2005. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Speech
Published
Rapid manufacturing complex geometries for high-power microwave applications
Seviour, R., Rennie, A. & Celik, H. K., 12/2009.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Unpublished
Additive manufacturing in assistive product design development
Sembiring, E., Rennie, A. & Laha, S., 12/2014, (Unpublished).
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
Additive Manufacturing as an Enabler of Environmental Solutions to Address Food Security
Roberts, J., Donkersley, P., Ashmore, L. & Rennie, A., 30/07/2023, Springer Tracts in Additive Manufacturing: Proceedings of CASICAM 2022. Zarbane, K. & Beidouri, Z. (eds.). Cham: Springer Nature, p. 287-297 11 p. (Springer Tracts in Additive Manufacturing).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review
Published
Designing Digital Materials with Volumetric Gradients
Richards, D. C., Abram, T. N. & Rennie, A. E. W., 27/04/2017. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Rapid Prototyping, Tooling and Manufacturing: Proc. Third National Conference on
Rennie, A. E. W. (Editor), Jacobson, D. M. (Editor) & Bocking, C. (Editor), 2002, Professional Engineering Publishing. 173 p.
Research output: Book/Report/Proceedings › Book
Published
Electroforming for Injection Moulding
Rennie, A. E. W. & Bocking, C., 2002, In: State of the Art Report - RAPTIA European Thematic Network.
Research output: Contribution to Journal/Magazine › Journal article
Published
The Fabrication of Electronic Packages from High Silicon Aluminium Alloys Using Thin Shell Electroformed (TSE) EDM Electrodes
Rennie, A. E. W., Bennett, G., Bocking, C. & Jacobson, D., 1/05/2002, In: Transactions of the Institute of Metal Finishing. 80, 3, p. 92-96 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Electroforming of Rapid Prototyping Mandrels for Electro-Discharge Machining Electrodes
Rennie, A. E. W., Bocking, C. E. & Bennett, G. R., 19/03/2001, In: Journal of Materials Processing Technology. 110, 2, p. 186-196 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Lancaster Virtual Prototyping Project: (GONW5167/8EUR – M4-07-LANC)
Rennie, A. E. W., 15/11/2006, Proceedings of the 4th EU Best Practice Conference: New Horizons in Graz..
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Rapid design, prototyping and manufacture: Proceedings of the Sixth National Conference on
Rennie, A. (Editor), Jacobson, D. M. (Editor) & Bocking, C. E. (Editor), 2005, X-CD Technologies Inc. 129 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid design, prototyping and manufacturing: Proceedings of the Ninth National Conference on
Rennie, A. (Editor), Jacobson, D. M. (Editor) & Bocking, C. E. (Editor), 2008, MJA Print. 173 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid Design, Prototyping and Manufacturing: Proceedings of the Tenth National Conference on
Rennie, A. (Editor), Bocking, C. E. (Editor) & Jacobson, D. M. (Editor), 2009, MJA Print. 123 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on
Rennie, A. (Editor) & Bocking, C. E. (Editor), 06/2011, CRDM Ltd. 203 p.
Research output: Book/Report/Proceedings › Book
Published
Simulation and manufacture of wax toolfaces for the creation of silicone rubber tools using Magics™ RP software
Rennie, A. & Bennett, G. R., 2000, In: International Journal of Engineering Simulation. 1, 3, p. 24-30 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Electroforming for Injection Moulding
Rennie, A. & Bocking, C., 20/06/2003, Rapid and Virtual Prototyping and Applications: Proc. Fourth National Conference on (Incorporating RAPTIA (Rapid Prototyping and Tooling - Industrial Applications) State-of-the-Art Reports). Bocking, C., Rennie, A. & Jacobson, D. (eds.). Professional Engineering Publishing, p. 239-248
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Rapid design, prototyping and manufacturing
Rennie, A., Aitchison, D. (Editor) & Jacobson, D. M., 12/2010, In: Virtual and Physical Prototyping. 5, 4, p. 181-181 1 p.
Research output: Contribution to Journal/Magazine › Editorial
Published
Development of a Continuous Droplet Generation System of Molten Metals using Electromotive Forces, with a View to its use in the Rapid Tooling Industry
Rennie, A. & Bennett, G. R., 07/1997, Proceedings of the Thirty-Second International Manufacturing, Automation and Systems, Technology, Applications, Design, Organisation and Management, Research (MATADOR) Conference. p. 399-403 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A system for the generation of liquid metal droplets using electromotive forces
Rennie, A. & Bennett, G. R., 09/1997, Proceedings World Congress: Manufacturing Technology Towards 2000: Incorporating the 7th International Conference on Manufacturing Engineering and the 3rd Australasian Conference on Rapid Product Development. James Cook University of North Queensland, p. 501-510 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Electroforming of a Stereolithography Master Pattern for use as an Electro-Discharge Machine electrode
Rennie, A., Bocking, C. E. & Bennett, G. R., 07/2000, Proceedings of the 33rd International MATADOR Conference: Formerly The International Machine Tool Design and Research Conference. Springer-Verlag, p. 301-306 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A transnational approach to the implementation of eco-design methodologies in SMEs
Rennie, A., Lambert, C., Baker, N. & Hjelm, O., 10/07/2007, The proceedings of the 5th International Conference on Design & Manufacture for Sustainable Development : Loughborough University, 10th - 11th July 2007.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A review of suitable methods for producing automated or semi automated product designs for production using RM technologies
Rennie, A. & Smith, P., 2009, 14th European Forum on Rapid Prototyping and Manufacturing: Proceedings of the. 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Unpublished
Consultancy and Support: Computer Aided Design & Engineering: (incorporating the Rapid Manufacturing North West & Sustainable Product Development sub-Projects) - Lancaster University Final Report
Rennie, A., 10/2008, (Unpublished) N/A. 129 p.
Research output: Book/Report/Proceedings › Commissioned report
Unpublished
Virtual Prototyping Phase III
Rennie, A., 01/2007, (Unpublished) N/A. 54 p.
Research output: Book/Report/Proceedings › Commissioned report
Published
Virtual Prototyping Phase II
Rennie, A., 05/2006, N/A. 37 p.
Research output: Book/Report/Proceedings › Commissioned report
Published
Virtual Prototyping
Rennie, A., 07/2005, N/A. 77 p.
Research output: Book/Report/Proceedings › Commissioned report
Published
Proceedings of the 14th Rapid Design, Prototyping and Manufacturing Conference
Rennie, A. E. W. (Editor) & Bibb, R. (Editor), 2016, Lancaster: Lancaster University. 165 p.
Research output: Book/Report/Proceedings › Proceedings
Published
University Programmes during COVID-19 Pandemic
Rennie, A., Gamage, K. A. A. & Lambert, C., 14/12/2020, Scholarly Community Encyclopdeia: COVID-19. Basel, Switzerland: MDPI AG, 4 p. 4362
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Entry for encyclopedia/dictionary
Published
Integrating CFD and prototyping technologies in the investigation of multi-element profiles for a high-lift variable pitch vertical-axis tidal power generator
Quayle, S. & Rennie, A., 2007, In: International Journal of Agile Systems and Management. 2, 2, p. 222-236 15 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Repurposing of metal support structures to form powder for use in additive manufacturing
Powell, D., Rennie, A., Molyneux, A., Burns, N. & Geekie, L., 5/04/2019, 16th Rapid Design, Prototyping & Manufacturing Conference (RDPM2019): Proceedings of the. Rennie, A., Pei, E. & Hackney, P. (eds.). 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Understanding powder degradation in metal additive manufacturing to allow the upcycling of recycled powders
Powell, D., Rennie, A., Geekie, L. & Burns, N., 20/09/2020, In: Journal of Cleaner Production. 268, 15 p., 122077.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Social Design Fiction. New Methods for the Design of Emerging Technology.
Pilling, M., Richards, D., Dunn, N. & Rennie, A., 31/05/2019, In: The Design Journal. 22, sup1, p. 1993-2005 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Horizon 2020 TWEETHER project for W-band high data rate wireless communications
Paoloni, C., Letizia, R., Napoli, F., Ni, Q., Rennie, A., Zimmerman, R., Andre, F., Pham, K., Krozer, V., Magne, F., Burciu, I., Ramirez, A., Rocchi, M., Marilier, M. & Vilar, R., 2015, Vacuum Electronics Conference (IVEC), 2015 IEEE International . IEEE, 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Effects of scan direction and orientation on mechanical properties of laser sintered polyamide-12
Nelson, J. A., Galloway, G., Rennie, A., Abram, T. & Bennett, G. R., 09/2014, In: International Journal of Advanced Design and Manufacturing Technology. 7, 3, p. 19-25 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of process conditions on temperature distribution in the powder bed during laser sintering of polyamide-12
Nelson, J. A., Rennie, A., Abram, T., Bennett, G. R., Adiele, A., Tripp, M., Wood, M. & Galloway, G., 07/2015, In: Journal of Thermal Engineering. 1, 3, p. 159-165 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Geometry Optimisation of Tools used in Milling of Spherical Surfaces
Neagu, C., Lupeanu, M. & Rennie, A., 07/2011, SIM2011 - Sustainable Intelligent Manufacturing : Proceedings of the 1st International Conference on Sustainable Intelligent Manufacturing. Bartolo, H. (ed.). Leiria, Portugal, p. 87-94 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A new design concept for milling tools of spherical surfaces obtained by kinematic generation
Neagu, C., Lupeanu, M. & Rennie, A., 1/05/2013, In: Applied Mathematical Modelling. 37, 9, p. 6119-6134 16 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A review on the potential of polylactic acid based thermoplastic elastomer as filament material for fused deposition modelling
Musa, L., Kumar, N. K., Rahim, S. Z. B. A., Rasidi, M. S. M., Rennie, A., Rahman, R., Yousefi Kanani, A. & Azmi, A. A., 30/09/2022, In: Journal of Materials Research and Technology. 20, p. 2841-2858 18 p.
Research output: Contribution to Journal/Magazine › Review article › peer-review
Published
SME application of LCA-based carbon footprints
Moss, J., Lambert, C. & Rennie, A., 06/2008, In: International Journal of Sustainable Engineering. 1, 2, p. 132-141 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Comparing Carbon Footprint Methodologies for SMEs
Moss, J., Lambert, C. & Rennie, A., 08/2008. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
Published
Encouraging Environmental Responsibility in Small Businesses
Moss, J., Lambert, C. & Rennie, A., 06/2008. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
Surface finishing techniques for SLM manufactured stainless steel 316L components
Morton, W., Green, S., Rennie, A. & Abram, T., 10/2011, Innovative Developments in Virtual and Physical Prototyping: Proc. of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping. CRC PRESS-TAYLOR & FRANCIS GROUP, p. 503-509 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Mechanical and Thermal Analyses of Metal-PLA Components Fabricated by Metal Material Extrusion
Mohammadizadeh, M., Lu, H., Fidan, I., Tantawi, K., Gupta, A., Hasanov, S., Zhang, Z., Alifui-Segbaya, F. & Rennie, A., 24/08/2020, In: Inventions — Open Access Journal. 5, 3, 11 p., 44.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Surface Flatness Measurement in Stereolithography
Male, J. C., Rennie, A. & Bennett, G. R., 06/2000, The Eighth International Conference on Rapid Prototyping: Proc. of. The University of Dayton, p. 111-117 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Additive manufacturing technologies and functional analysis used in product development optimization
Lupeanu, M., Rennie, A. & Neagu, C., 06/2011, Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 105-112 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Redesign of custom-fitted surgical guide with targeted functional analysis fabricated via SLM
Lupeanu, M., Rennie, A., Eggbeer, D. & Neagu, C., 06/2011, Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 173-181 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Design for Manufacture using Functional Analysis and CAD Mould Simulation for Rapid Prototyping and Rapid Tooling: Paper: ESDA2012-82410
Lupeanu, M., Brooks, H., Rennie, A., Celik, K., Neagu, C. & Akinci, I., 07/2012, ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis (ESDA 2012): Proceedings of the . Nantes: American Society of Mechanical Engineers (ASME), 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Function Based Design for Rapid Prototyping: A Medical Industry Application for an Ocular Speculum
Lupeanu, M., Brooks, H., Rennie, A., Hill, D. & Neagu, C., 06/2012, 13th Rapid Design, Prototyping & Manufacturing Conference: Proceedings of the . Bocking, C. & Rennie, A. (eds.). High Wycombe: CRDM Ltd, p. 45-53 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Functional analysis for the development of bio-medical products
Lupeanu, M., Neagu, C., Opran, C. & Rennie, A., 10/2012, p. 330-336. 7 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Product Optimization by Rapid Manufacturing and Targeted Functional Analysis
Lupeanu, M., Rennie, A., Neagu, C. & Celik, K., 2011, 16th European Forum on Rapid Prototyping and Manufacturing: Proceedings of the. 14 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Research on deploying technical functional analysis for additive manufacturing of a surgical device for intravitreal interventions
Lupeanu, M., Brooks, H., Rennie, A. & Hill, D., 2013, In: Buletinul Ştiinţific al Universităţii Politehnica Bucureşti, Seria D – Inginerie Mecanică. 75, 1, p. 141-160 20 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The role of technical functional analysis in innovative design of bespoke rapid manufactured parts: medical industry applications
Lupeanu, M., Rosu, M.-M., Rennie, A., Neagu, C. & Brooks, H., 06/2013, Advances in Production, Automation and Transportation Systems: Proceedings of the 6th WSEAS International Conference on Manufacturing Engineering, Quality and Production Systems (MEQAPS13) and 4th International Conference on Automotive and Transportation Systems (ICAT13). Brasov, Romania: WSEAS Press, Vol. 13. p. 227-232 6 p. (Mathematics and Computers in Science and Engineering Series; vol. 13).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Research strategy on developing additive manufactured bespoke ophthalmic instruments assisted by an online integrated platform
Lupeanu, M., Rennie, A., Rosu, M.-M. & Moagar-Poladian, G., 04/2014, In: Buletinul Ştiinţific al Universităţii Politehnica Bucureşti, Seria D – Inginerie Mecanică. 76, 2, p. 143-162 20 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Unpublished
Redesign of custom-fitted surgical guide with targeted functional analysis fabricated via SLM
Lupeanu, M., Rennie, A. & Neagu, C., 31/03/2014, (Unpublished).
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
Automated software for streamlining optimisation of resource planning for an additive manufacturing system
Lupeanu, M., Rosu, M.-M., Doicin, C., Rennie, A. & Neagu, C., 09/2014, Proceedings of 3rd International Conference Advances in Engineering & Management (ADEM 2014). 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Contactless 3D surface characterization of additive manufactured metallic components using terahertz time-domain spectroscopy
Lu, Y., Zhu, H., Zaman, A. M., Rennie, A. E. W., Lin, H., Tian, Y. & Degl’Innocenti, R., 9/08/2023, In: Optical Materials Express. 13, 9, 13 p., 2513.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
E-pub ahead of print
Comparison of Fixation Techniques in Oblique and Biplanar Chevron Medial Malleolar Osteotomies: a Finite Element Analysis
Levent, A., Yapti, M., Celik, H. K., Kose, O., Kılıçaslan, Ö. F. & Rennie, A., 23/07/2021, (E-pub ahead of print) In: The Journal of Foot and Ankle Surgery. YJFAS 53575.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Delivering eco design business support to SMEs on a transnational scale: benefits and learning outcomes
Lambert, C., Rennie, A., Baker, N. & Hjelm, O., 7/11/2007. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract
Unpublished
The UK Business Support Simplification Programme: A Case Study for the North West Universities Association from Lancaster University : Invited paper for the UK consultation process for DBERR's initiative to streamline business support services
Lambert, C., Rennie, A. & Williams, D., 2008, (Unpublished) 10 p.
Research output: Working paper
Published
Placing postgraduate research students at the heart of knowledge exchange: benefits for academia and industry
Lambert, C. & Rennie, A., 1/07/2010, Proceedings of the 3rd International Symposium for Engineering Education (ISEE2010): educating engineers for a changing world : leading transformation from an unsustainable global society. p. 485-493 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Delivering Regional Eco-Innovation through Knowledge Exchange
Lambert, C. & Rennie, A., 25/10/2011. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Development of an Engineering Design Academy: Increasing the commercial exposure of undergraduate students
Lambert, C. & Rennie, A., 09/2013, Proceedings of The 30th International Manufacturing Conference: Professional Development of Engineers for Advanced Manufacturing. Dublin, Ireland, p. 473-482 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Experiences from COVID-19 and Emergency Remote Teaching for Entrepreneurship Education in Engineering Programmes
Lambert, C. & Rennie, A., 7/06/2021, In: Educational Sciences. 11, 16 p., 282.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Unpublished
How to keep it in for longer: innovation in the Critical Care Unit
Laha, S. & Rennie, A., 6/11/2013, (Unpublished).
Research output: Contribution to conference - Without ISBN/ISSN › Other
Published
Improved Tracheostomy Device
Laha, S. (Inventor), Adiele, A. C. (Inventor), Brewer, D. (Inventor), Ntelis, T. (Inventor), Pitman, S. (Inventor), Rennie, A. (Inventor) & Sheikh, Y. (Inventor), 8/11/2018, IPC No. A61M 16/04 (2006.01), Patent No. PCT/GB2018/051193, 3/05/2018, Priority date 3/05/2017, Priority No. 1707060.8
Research output: Patent
Published
A review on graft compatibilizer for thermoplastic elastomer blend
Kumar, N. K., Musa, L., Rasidi, M. S. M., Rahim, S. Z. A., Rahman, R., Azmi, A. A. & Rennie, A., 12/10/2021, In: Journal of Physics: Conference Series. 2080, 8 p., 012003.
Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1 2 3 Next

Research

Professor Allan Rennie

Quick Links

Connect With Us