Home > Research > Engineering > Publications & Outputs
View graph of relations
  1. Published

    A comparison of plutonium abundance in soil from sites in the United Kingdom measured with high-efficiency, high-resolution γ-ray spectroscopy, neutron assay and accelerator mass spectrometry

    Tighe, C., Christl, M., Degueldre, C., Andrew, J. & Joyce, M. J., 9/09/2018, Plutonium Futures: The Science 2018. San Diego: American Nuclear Society, p. 158-160 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  2. Published

    A comparison of the manufacture and mechanical performance of porous aluminium and aluminium syntactic foams made by vacuum-assisted casting

    Cheneler, D. & Kennedy, A. R., 3/07/2020, In: Materials Science and Engineering A. 789, 9 p., 139527.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  3. Published

    A comparison of the mechanical properties of a modified silorane based dental composite with those of commercially available composite material

    Zakir, M., Kheraif, A. A. A. A., Asif, M., Wong, F. S. L. & Rehman, I. U., 2013, In: Dental Materials. 29, 4, p. e53-e59

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  4. Published

    A Comparison of γ-ray Spectroscopy with Accelerator Mass Spectrometry for the Environmental Assay of Plutonium

    Joyce, M. J., Tighe, C., Campbell, I., Christl, M., Degueldre, C., Iridoy, M. C., Semple, K. T. & Andrew, J., 5/09/2019, 2018 IEEE Nuclear Science Symposium and Medical Imaging Conference, NSS/MIC 2018 - Proceedings. IEEE, 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  5. Published

    A composite material with Poisson’s ratio tunable from positive to negative values: an experimental and numerical study

    Hou, X., Hu, H. & Silberschmidt, V., 12/2013, In: Journal of Materials Science. 48, 24, p. 8493-8500 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  6. Published

    A Comprehensive Business Model for Rapid Manufactured Products

    Hasan, S. & Rennie, A., 10/2008, 19th International Symposium of the Danube-Adria-Association-for-Automation-and-Manufacturing - Intelligent Manufacturing & Automation: Focus on Next Generation of Intelligent Systems and Solutions. Vienna: DAAAM International, p. 591-592 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  7. Published

    A comprehensive review on advances of oil-based nanofluids for concentrating solar thermal collector application

    Rubbi, F., Das, L., Habib, K., Aslfattahi, N., Saidur, R. & Alam, S. U., 15/09/2021, In: Journal of Molecular Liquids. 338, 37 p., 116771.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  8. Published

    A comprehensive review on improving the production of rich-hydrogen via combined steam and CO2 reforming of methane over Ni-based catalysts

    Farooqi, A. S., Yusuf, M., Mohd Zabidi, N. A., Saidur, R., Sanaullah, K., Khan, A. & Abdullah, B., 1/09/2021, In: International Journal of Hydrogen Energy. 46, 60, p. 31024-31040 17 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  9. Published

    A computational and experimental analysis of the buckling, postbuckling and initial failure of pultruded GRP columns.

    Turvey, G. & Zhang, Y., 09/2006, In: Computers and Structures. 84, 22-23, p. 1527-1537 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  10. Published

    A computational study of preferential diffusion and scalar transport in nonpremixed hydrogen-air flame

    Jiang, J., Jiang, X. & Zhu, M., 7/12/2015, In: International Journal of Hydrogen Energy. 40, 45, p. 15709-15722 14 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  11. Published

    A computationally efficient adaptive IIR solution to active noise and vibration control systems

    Montazeri, A. & Poshtan, J., 11/2010, In: IEEE Transactions on Automatic Control. 55, 11, p. 2671-2676 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  12. Published

    A Computer Aided Design (CAD) support tool for parametric design of products for Rapid Manufacture (RM)

    Smith, P. & Rennie, A., 10/2009, 4th International Conference on Advanced Research in Virtual and Rapid Prototyping: Proceedings of the . Leiria, Portugal: Taylor & Francis Group, p. 95-100 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  13. Published

    A computer-controlled dynamic phantom for respiratory-gated medical radiotherapy research

    Bandala Sánchez, M. & Joyce, M., 07/2013, In: IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences . E96-A, 7, p. 1609-1616 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  14. Published

    A conceptual study for a computer-based tool to support electronics design in a mechatronic environment.

    Bradley, D. A., Walters, R. M. & Dorey, A. P., 2000, In: Microprocessors and Microsystems. 24, 2, p. 51-61 11 p.

    Research output: Contribution to Journal/MagazineJournal article

  15. Published

    A condition monitoring system for an early warning of developing faults in wind turbine electrical systems

    Ma, X., Cross, P. & Qian, P., 1/12/2016, In: Insight – Non-Destructive Testing and Condition Monitoring. 58, 12, p. 663-670 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  16. Published

    A constitutive model for high strain rate deformation in FCC metals based on irreversible thermodynamics

    Huang, M., Rivera-Díaz-del-Castillo, P. E. J., Bouaziz, O. & van der Zwaag, S., 09/2009, In: Mechanics of Materials. 41, 9, p. 982-988 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  17. Published

    A continuous process for the liquid phase epoxidation of an olefinic compound

    Saha, B., Ambroziak, K., Sherrington, DC. & Mbeleck, R., 17/04/2018, Patent No. Indian Patent No.: 295846

    Research output: Patent

  18. Published

    A continuous-flow apprach to alkene epoxidation catalysed by Polystyrene 2-(Aminomethyl)Pyridine supported Mo(VI) complex

    Saha, B., Mohammed, ML. & Mbeleck, R., 19/06/2016, 5th International Conference on Green Process Engineering (GPE 2016). Berruti, F. & Briens, C. (eds.). (An ECI Conference Series; vol. 16AG).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  19. Published

    A control system for a new wave energy converter in irregular wave climates.

    Aggidis, G. A., Rahmati, M. T., Chaplin, R. V., McCabe, A. P., Mingham, C. G., Causon, D. M. & Bhinder, M. A., 06/2009.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  20. Published

    A coupled approach to weld pool, phase and residual stress modelling of laser direct metal deposition (LDMD) processes

    Vogel, M., Khan, M., Ibarra-Medina, J., Pinkerton, A., N'Dri, N. & Megahed, M., 2013, 2nd World Congress on Integrated Computational Materials Engineering. Li, M., Campbell, C., Thornton, K., Holm, E. & Gumbsch, P. (eds.). Wiley, p. 231-236 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  21. Published

    A coupled thermal and electrochemical study of lithium-ion battery cooled by paraffin/porous-graphite-matrix composite

    Greco, A. & Jiang, X., 31/05/2016, In: Journal of Power Sources. 315, p. 127-139 13 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  22. Published

    A creativity aid for designers.

    French, M. J., Chaplin, R. V. & Langdon, P. M., 1993, Proceedings of ICED '93. Zurich: Heurista

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  23. Published

    A criterion for the formation of high entropy alloys based on lattice distortion

    Toda-Caraballo, I. & Rivera-Díaz-Del-Castillo, P. E. J., 1/04/2016, In: Intermetallics. 71, p. 76-87 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  24. Published

    A Data-Driven Statistical Approach for Monitoring and Analysis of Large Industrial Processes

    Montazeri, A., Ansarizadeh, M. H. & Arefi, M., 31/12/2019, In: IFAC-PapersOnLine. 52, 13, p. 2354-2359 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  25. Unpublished

    A DEM for visualising damage evolution and predicting failure of composite lamina under uniaxial and biaxial loads

    Ismail, Y., 2017, (Unpublished) Lancaster University. 177 p.

    Research output: ThesisDoctoral Thesis

Previous 1 2 3 4 5 6 7 8 ...211 Next

Back to top