School of Engineering

View graph of relations

Faculty of Science and Technology

Show 14 centres, groups and clusters

Hide 14 centres, groups and clusters

5601 - 5700 out of 6,515Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Author last name

Published
Bolted connections in PFRP structures.
Turvey, G. J., 2000, In: Progress in Structural Engineering and Materials. 2, 2, p. 146-156 11 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Flexure of pultruded GRP beams with semi-rigid end connections.
Turvey, G. J., 12/1999, In: Composite Structures. 47, 1, p. 571-580 10 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Moment – rotation tests on bolted end connections in pultruded GRP beams – tests with stainless steel cleata and an assessment of their performance relative to GRP cleats.
Turvey, G. J., 2000, Proceedings in the ECCM9 (composites – from fundamentals to exploitation). Brighton
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Semi-rigid column base connections in pultruded GRP frame structures.
Turvey, G. J. & Cooper, C., 2000, In: Computers and Structures. 76, 1-3, p. 77-88 12 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Experimental and computed natural frequencies of square pultruded GRP plates: effects of anisotropy, hole size ratio and edge support conditions.
Turvey, G. J., Mulcahy, N. & Widden, M. B., 12/2000, In: Composite Structures. 50, 4, p. 391-403 13 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Uniform and patch loaded steel plates: comparisons between analysis and experiment.
Turvey, G. J. & Osman, M. Y., 2000, Computational steel structures technology. Ivanyi, M., Muzeau, J. P. & Topping, B. H. V. (eds.). Edinburgh: Civil-Comp Press, p. 49-59 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Uniform and patch loaded steel plates – comparisons between analysis and experiment.
Turvey, G. J. & Osman, M. Y., 2000, Proceedings of the 5th international conference on computational structures technology. Leuven
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Fibre Reinforced Polymer Composite Structural Pultrusions and Their End Connections.
Turvey, G. J., 1999, Composites and Plastics in Construction: BRE, Watford, UK, 16th-18th November 1999. RAPRA, p. 1-8 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Semi-rigid bolted connections in pultruded GRP beams and simple frames: part 1
Turvey, G. J., 1999, Proceedings of the COST C1 conference: COST C1: control of the semi-rigid behaviour of civil engineering structural connections. Liege, p. 547-556 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Elasto-plastic response of uniformly loaded sector plates: full-section yield model predictions and spread of plasticity.
Turvey, G. J. & Salehi, M., 11/2001, In: Computers and Structures. 79, 26-28, p. 2335-2348 14 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Frame connections.
Turvey, G. J., 1998, COST C1: state-of-the-art review on design, testing, analysis and applications of polymeric composite connections - Semi-rigid behaviour of civil engineering structural connections. Mottram, J. T. & Turvey, G. J. (eds.). Brussels/Luxembourg: European Commission, p. 27-49 23 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Plate-to-plate mechanical: part II: testing and applications.
Turvey, G. J., 1998, COST C1: state-of-the-art review on design, testing, analysis and applications of polymeric composite connections - Semi-rigid behaviour of civil engineering structural connections. Mottram, J. T. & Turvey, G. J. (eds.). Brussels/Luxembourg: European Commission, p. 15-26 12 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Recent developments in testing, design analysis and modelling of bolted connections in pultruded GRP frames made of open-section profiles.
Turvey, G. J., 1998, Proceedings of the 4th EPTA world pultrusion conference. European Pultrusion Technology Association, p. 14
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Single-bolt tension joint tests on pultruded GRP plate: effects of the orientation of the tension direction relative to pultrusion direction.
Turvey, G. J., 1998, In: Composite Structures. 42, 4, p. 341-351 11 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Torsion tests on pultruded GRP sheet.
Turvey, G. J., 1998, In: Composites Science and Technology. 58, 8, p. 1343-1351 9 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Semi-rigid connection in pultruded GRP frame structures.
Turvey, G. J. & Cooper, C., 1998, Mechanics of composite materials and structures. Mota Soares, C. A. ,., Mota Soares, A. M. & Freitas, M. J. M. (eds.). p. 151-166 16 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Semi-rigid connections and their effects on the sway response of pultruded GRP columns in low-rise construction.
Turvey, G. J. & Cooper, C., 1998, Proceedings of the 2nd international conference on composites in infrastructure (ICCI ’98). University of Arizona, p. 221-235 15 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Uplift tests on column base connections in pultruded GRP frames.
Turvey, G. J. & Cooper, C., 1998, In: Proceedings of the eighth international conference on composite materials (ECCM-8). p. 285-292 8 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Elastic large deflection analysis of stiffened annular sector plates.
Turvey, G. J. & Salehi, M., 1998, In: International Journal of Mechanical Sciences. 40, 1, p. 51-70 20 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Effect of load position on the lateral buckling of pultruded GRP cantilevers - correlations between experiment and theory.
Turvey, G. J., 05/1996, In: Composite Structures. 35, 1, p. 33-47 15 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Lateral buckling tests on rectangular cross-section pultruded GRP cantilever beams.
Turvey, G. J., 1996, In: Composites Part B: Engineering. 27, 1, p. 35-42 8 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Testing of a pultruded GRP pinned base rectangular portal frame for the EUROCOMP project
Turvey, G. J., 1996, Structural design of polymer composites: EUROCOMP design code and handbook. Clarke, J. L. (ed.). London: E. and FN Spon, p. 719-741 23 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Lateral buckling tests on pultruded GRP I-section beams with simply supported - simply supported and clamped - simply supported end conditions.
Turvey, G. J. & Brooks, R. J., 1996, Proceedings of the 1st international conference on composites in infrastructure (ICCI '96). University of Arizona, p. 651-664 14 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Characterisation of the short term static moment - rotation response of bolted connections between pultruded GRP beam and column WF-sections.
Turvey, G. J. & Cooper, C., 1996, Proceedings of the 2nd international conference on advanced composite materials in bridges and structures (ACMBS II). Montreal: Canadian Society for Civil Engineering, p. 927-934 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Semi-rigid pultruded GRP frame connections: tests to determine static moment-rotation characteristics.
Turvey, G. J. & Cooper, C., 1996, ECCM-7 Seventh European Conference on Composite Materials : realising their commercial potential. Bader, M. (ed.). Cambridge: Woodhead Publishing Limited, p. 295-300 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Full-range response of circular steel plates subjected to combined transverse pressure and edge compression.
Turvey, G. J. & Drinali, H., 1996, Advances in computational techniques for structural engineering. Topping, B. H. V. (ed.). Edinburgh: Civil-Comp Press, 313 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Elastic and initial flexural failure analysis of unsymmetrically laminated cross-ply strips.
Turvey, G. J. & Osman, M. Y., 1996, In: Composites Part B: Engineering. 27, 5, p. 505-518 14 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Analysis of pultruded glass reinforced plastic beams with semi-rigid end connections.
Turvey, G. J., 1997, In: Composite Structures. 38, 1, p. 3-16 14 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Non-linear first yield analysis of circular plates subjected to combined uniform pressure and edge compression.
Turvey, G. J. & Drinali, H., 1997, In: Computers and Structures. 63, 4, p. 769-773 5 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Circular plates with one diametral stiffener: an elastic large deflection analysis.
Turvey, G. J. & Salehi, M., 1997, In: Computers and Structures. 63, 4, p. 775-783 9 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Full-section yield analysis of uniformly loaded sector plates.
Turvey, G. J. & Salehi, M., 1997, Trends in structural mechanics: theory, practice and education. Roorda, J. & Srivastava, N. K. (eds.). v. 54 ed. Dordrecht; London: Kluwer Academic, p. 289-298 10 p. (Solid mechanics and its applications).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Testing of a pultruded GRP pinned base rectangular portal frame for the EUROCOMP project
Turvey, G. J., 1995, EUROCOMP design guide and background projects. Clarke, J. L. (ed.). London: Chapman and Hall
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Single bolt tension joint tests on pultruded GRP WF-section web and flange material.
Turvey, G. J. & Cooper, C., 1995, Proceedings of the 10th international conference on composite materials (ICCM-10). Poursartip, A. & Street, K. (eds.). Vancouver: Woodhead Publishing Ltd., p. 621-628 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Large deflection analysis of eccentrically stiffened sector plates.
Turvey, G. J. & Salehi, M., 1995, Proceedings of a conference on developments in computational techniques for civil engineering (CIVIL-COMP 95). Topping, B. H. V. (ed.). Edinburgh: Civil-Comp Press, p. 243-253 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Tension/compression strength of unnotched/notched pultruded GRP plate.
Turvey, G. J., 1992, Proceedings of the ECCM-composites testing and standardisation conference.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Tests on pultruded GRP posts for handrail/barrier structures.
Turvey, G. J. & Slater, R. C., 1992, First international conference on advanced composite materials in bridges and structures. Canada
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Open-hole tension strength of pultruded GRP plate.
Turvey, G. & Wang, P., 1/02/2003, In: Proceedings of the ICE - Structures and Buildings. 156, 1, p. 93-101 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Structural analysis of CFRP-plated pultruded GRP beams.
Turvey, G., 1/04/2006, In: Proceedings of the ICE - Structures and Buildings. 159, SB2, p. 65-75 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Tearing failure of web-flange junctions in pultruded GRP profiles.
Turvey, G. J. & Zhang, Y., 1/02/2005, In: Composites Part A: Applied Science and Manufacturing. 36, 2, p. 309-317 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Failure of pultruded GRP single-bolt tension joints under hot-wet conditions.
Turvey, G. & Wang, P., 1/02/2007, In: Composite Structures. 77, 4, p. 514-520 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Failure of pultruded GRP WF-section webs in compression - an experimental investigation.
Turvey, G., 2006, Proceedings of the 12th European conference on composite materials (ECCM-12).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
An FE analysis of the stresses in pultruded GRP single-bolt tension joints and their implications for joint design.
Turvey, G. & Wang, P., 2006, Proceedings of the 6th international conference on computational mechanics (ECCM 2006).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Single-bolt tension joints in pultruded GRP plate - effects of elevated temperature on failure loads, failure modes, load orientation and joint efficiency.
Turvey, G. & Wang, P., 2006, Proceedings of the 2nd international conference on joining plastics 2006..
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Characterisation of the rotational stiffness and strength of web-flange junctions of pultruded GRP WF-sections via web bending tests.
Turvey, G. & Zhang, Y., 02/2006, In: Composites Part A: Applied Science and Manufacturing. 37, 2, p. 152-164 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A computational and experimental analysis of the buckling, postbuckling and initial failure of pultruded GRP columns.
Turvey, G. & Zhang, Y., 09/2006, In: Computers and Structures. 84, 22-23, p. 1527-1537 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Cross-stiffened circular plates: an elasto-plastic large deflection analysis
Turvey, G., 14/09/2010.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Effects of bonded splice joints on the flexural response of pultruded fibre reinforced polymer beams
Turvey, G., 7/09/2010. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
An experimental investigation of bolt pull-through in pultruded GRP plate
Turvey, G., 1/09/2009, p. 462-472. 11 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Experimental evaluation of bolt pull-through in pultruded glass-fibre-reinforced polymer plate
Turvey, G. J., 10/2011, In: Proceedings of the ICE - Structures and Buildings. 164, 5, p. 307-319 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Failure of pultruded GRP angle leg junctions in tension
Turvey, G. & Wang, P., 27/07/2009. 11 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Environmental effects on the failure of GRP multi-bolt joints
Turvey, G. J. & Wang, P., 08/2009, In: Proceedings of the ICE - Structures and Buildings. 162, 4, p. 275-287 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Elasto-plastic large deflection response of pressure loaded circular plates stiffened by a single diametral stiffener
Turvey, G. J. & Salehi, M., 2008, In: Thin-Walled Structures. 46, 7-9, p. 991-1002 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Buckling of CFRP stiffened GRP flanges
Amal Afifi, 22/07/2008. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Bending of tip-loaded CFRP stiffened pultruded GRP cantilevers: comparison between theory and experiment
Turvey, G., 2/06/2008. 10 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Effect of hole clearance on bolt loads in pultruded GRP tension joints
Turvey, G. & Wang, P., 8/07/2007. 7 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Elasto-plastic large deflection response of pressure loaded circular plates stiffened by a single diametral stiffener
Turvey, G. & Salehi, M., 26/06/2007. 27 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Opening mode failure of pultruded GRP angle leg junctions
Turvey, G. & Zhang, Y., 30/04/2007, p. 389-393. 5 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Pultruded GFRP continuus beams - comparison of flexural test data with analysis predictions
Turvey, G., 6/09/2011, p. 470-481.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Failure of single-lap single-bolt tension joints in pultruded glass fibre reinforced plate
Turvey, G., 13/06/2012. 8 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
An experimental investigation of the tensile behaviour of single-lap bolted joints in pultruded GFRP plate
Turvey, G. & Gode, J., 13/09/2012. 15 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Flexure of pultruded glass-fibre-reinforced polymer beams with bonded splice joints
Turvey, G. J., 10/2011, In: Proceedings of the ICE - Structures and Buildings. 164, 5, p. 333-344 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Bolted joints in pultruded glass fibre reinforced polymer (GFRP) composites
Turvey, G., 2011, Composite joints and connections: principles, modelling and testing. Camanho, P. & Tong, L. (eds.). Cambridge: Woodhead Publishing Limited, p. 77-111 35 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Enhancing the load capacity of pultruded GFRP beams via discrete load redistribution
Turvey, G., 04/2015, In: Composite Structures. 122, p. 352-360 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Flexural behavior of pultruded glass fibre reinforced polymer composite beams with bolted splice joints
Turvey, G. & Cerutti, X., 01/2015, In: Composite Structures. 119, 1, p. 543-550 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Experimental and analytical investigation of two- and six-plate bonded splice joints on serviceability limit deformations of pultruded GFRP beams
Turvey, G., 05/2014, In: Composite Structures. 111, p. 426-435 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An experimental investigation of the failure of pultruded GFRP single-lap two-bolt connections in tension’
Turvey, G., 2014, Proceedings of the International Conference, FRP Bridges 2014.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Ultimate loads, strengths, extensions and strains of pultruded GFRP single-lap, single-bolt tension joints
Turvey, G., 2013, Proceedings of the International Conference on Advanced Composites in Construction 2013. p. 357-367 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Testing of pultruded GFRP materials and structures for civil engineering
Turvey, G., 2013, Advanced Composites in Civil Engineering. 1st ed. Woodhead Publishing Limited, p. 440-508 69 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review
Published
Single- and double-lap bolted joints in pultruded composite plate
Turvey, G., 2014.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Effects of splice joint geometry and bolt torque of the serviceability response of pultruded glass fibre reinforced polymer composite beams
Turvey, G. & Cerutti, X., 1/11/2015, In: Composite Structures. 131, p. 490-500 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Testing and analysis of pultruded GFRP continuous beams for the deflection serviceability limit state
Turvey, G. J., 1/05/2016, In: Composite Structures. 141, p. 213-220 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
CFRP stiffened GFRP continuous beams – a simple closed-form analysis and its experimental verification for serviceability limit deformations
Turvey, G. J., 1/10/2016, In: Composite Structures. 153, p. 952-960 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Pultruded GFRP double-lap single-bolt tension joints - temperature effects on mean and characteristic failure stresses and knock-down factors
Turvey, G. J. & Sana, A., 1/10/2016, In: Composite Structures. 153, p. 624-631 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Experimental investigation of the load–deformation behaviour of pultruded GFRP modular and custom safety barriers
Turvey, G. J., 1/12/2015, In: Composite Structures. 133, p. 659-669 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Bending of unequal span continuous pultruded glass fibre reinforced polymer (GFRP) beams
Turvey, G. J., 2015, Advanced Composites in Construction, ACIC 2015 - Proceedings of the 7th Biennial Conference on Advanced Composites In Construction. p. 227-232 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Thermo-mechanically loaded glass-fibre-reinforced polymer single-bolt single-lap joints
Turvey, G. J. & Szulik, M., 11/2018, In: Proceedings of the ICE - Structures and Buildings. 171, 11, p. 830-841 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effects of Lap Thickness and Joint Geometry on Failure of Pultruded Composite Single-Lap Bolted Tension Joints
Turvey, G. J. & Assassa, J., 5/09/2017, p. 23-28. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
E-pub ahead of print
Mechanical properties of pultruded GFRP WF, channel and angle profiles for limit state/permissible stress design
Turvey, G. J. & Zhang, Y., 7/04/2018, (E-pub ahead of print) In: Composites Part B: Engineering. 148, p. 260-271 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Flexural moduli and end connection stiffnesses of symmetrically loaded GFRP beams for limit state serviceability design analysis
Turvey, G. J. & Zhang, Y.-S., 15/10/2018, In: Composite Structures. 202, p. 1164-1175 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Two-bay pultruded GFRP safety Barrier/Guardrail – Testing, analysis and compliance with standards
Turvey, G. J. & Milburn, J., 1/12/2020, In: Composite Structures. 253, 12 p., 112745.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Thermal preconditioning study for bolted tension joints in pultruded GRP plate
Turvey, G. & Wang, P., 1/02/2007, In: Composite Structures. 77, 4, p. 509-513 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Inclined composite guardrails/safety barriers – Numerical and experimental evaluation of their transverse stiffnesses and compliance with standards
Turvey, G. J. & Sutch, A., 15/11/2021, In: Composite Structures. 276, 9 p., 114552.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Multi-state dependent parameter model identification and estimation
Tych, W., Sadeghi, J., Smith, P. J., Chotai, A. & Taylor, C. J., 2012, System Identification, Environmental Modelling, and Control System Design. Wang, L. & Garnier, H. (eds.). London: Springer, p. 191-210 20 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Radially and azimuthally polarized laser induced shape transformation of embedded metallic nanoparticles in glass
Tyrk, M. A., Zolotovskaya, S. A., Gillespie, W. A. & Abdolvand, A., 27/08/2015, In: Optics Express. 23, 18, p. 23394-23400 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Real time nanogravimetric monitoring of corrosion for nuclear decommissioning
Tzagkaroulakis, I. & Boxall, C., 2015, In: ECS Transactions. 66, 17, p. 73-83 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Real time nanogravimetric monitoring of corrosion in radioactive environments
Tzagkaroulakis, I., 2017, Lancaster University. 196 p.
Research output: Thesis › Doctoral Thesis
Published
Real-Time Nanogravimetric Monitoring of Corrosion in Radioactive Decontamination Systems
Tzagkaroulakis, I., Boxall, C. & Trivedi, D., 23/12/2016, In: MRS Advances. 2, 10, p. 577-582 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Advances and challenges of methanol-tolerant oxygen reduction reaction electrocatalysts for the direct methanol fuel cell
Ud Din, M. A., Idrees, M., Jamil, S., Irfan, S., Nazir, G., Mudassir, M. A., Saleem, M. S., Batool, S., Cheng, N. & Saidur, R., 28/02/2023, In: Journal of Energy Chemistry. 77, p. 499-513 15 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Ground Penetrating Radar as a Contextual Sensors for Multi-Sensor Radiological Characterisation
Ukaegbu, I. & Akurugoda Gamage, K. A., 7/04/2017, In: Sensors. 17, 4, p. 1-21 21 p., 790.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A novel method for remote depth estimation of buried radioactive contamination
Ukaegbu, I. & Akurugoda Gamage, K., 8/02/2018, In: Sensors. 18, 2, 13 p., 507.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Model For Remote Depth Estimation Of Buried Radioactive Wastes Using CdZnTe Detector
Ukaegbu, I. & Akurugoda Gamage, K., 18/05/2018, In: Sensors. 18, 5, 12 p., 1612.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Nonintrusive Depth Estimation of Buried Radioactive Wastes using Ground Penetrating Radar and a Gamma Ray Detector
Ukaegbu, I., Akurugoda Gamage, K. & Aspinall, M. D., 12/01/2019, In: Remote Sensing. 11, 2, 13 p., 141.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Integration of Ground-Penetrating Radar and Gamma-Ray Detectors for Nonintrusive Characterisation of Buried Radioactive Objects
Ukaegbu, I., Akurugoda Gamage, K. & Aspinall, M., 18/06/2019, In: Sensors. 19, 12, 13 p., 2743.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Validation of A Model for Nonintrusive Depth Estimation of Buried Radioactive Wastes
Ukaegbu, I. K. & Gamage, K. A. A., 5/09/2019, 2018 IEEE Nuclear Science Symposium and Medical Imaging Conference, NSS/MIC 2018 - Proceedings. IEEE, 3 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Estimating the Depth of Buried Radioactive Sources using Ground Penetrating Radar and a Gamma Ray Detector: 2019 USNC-URSI Radio Science Meeting (Joint with AP-S Symposium), USNC-URSI 2019 - Proceedings
Ukaegbu, I. K., Aspinall, M. & Gamage, K. A. A., 10/10/2019, 2019 USNC-URSI Radio Science Meeting (Joint with AP-S Symposium). IEEE, p. 99-100 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Integration of ground-penetrating radar and gamma-ray detectors for non-intrusive localisation of buried radioactive sources
Ukaegbu, I., 2020, Lancaster University. 245 p.
Research output: Thesis › Doctoral Thesis
Published
Vibration-based delamination detection in a composite plate
Ullah, I., Sinha, J. & Pinkerton, A., 2013, In: Mechanics of Advanced Materials and Structures. 20, 7, p. 536-551 16 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Comparative evaluation of optimum additive manufacturing technology to fabricate medical bespoke prototypes obtained with composite materials
Ulmeanu, M., Doicin, C., Baila, D., Rennie, A. E. W., Neagu, C. & Laha, S., 03/2015, In: Revista de Materiale Plastice. 52, 3, p. 416-422 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
New Tracheostomy Device Concept: An Additive Manufacturing Challenge in Reducing Late Clinical Complications
Ulmeanu, M.-E., Ulmeanu, L., Doicin, C.-V., Rennie, A. E. W. & Lupeanu, E., 11/2017, Proceedings of the 30th International Business Information Management Association Conference: Vision 2020: Sustainable Economic development, Innovation Management, and Global Growth. Soliman, K. S. (ed.). Madrid, Spain: International Business Information Management Association (IBIMA), p. 2611-2622 12 p. #538
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
TecHUB 4.0 - Technology and Entrepreneurship Education for Bridging the Gap in Smart Product Development
Ulmeanu, M., Doicin, C., Roșca, L., Rennie, A., Abram, T. & Bajdor, P., 21/08/2019, MATEC Web of Conferences. Bondrea, I., Cofaru, N. F. & Intă , M. (eds.). Sibiu, Romania: EDP Sciences, Vol. 290. 9 p. 13012
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Previous 1...53 54 55 56 57 58 59 60 ...66 Next

Research

School of Engineering

Quick Links

Connect With Us