Home > Research > Structures, Materials and Manufacturing > Publications & Outputs

Research

View graph of relations

Structures, Materials and Manufacturing

151 - 200 out of 969Page size: 50
RSS feed of this list
  1. Published

    Determination of flow parameters through CFD analysis for agricultural irrigation equipment: a case study for a mini valve

    Celik, K., Rennie, A., Karayel, D. & Akinci, I., 09/2011, In: Journal of Agricultural Machinery Science. 7, 3, p. 231-239 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  2. Published

    Determination of flow parameters through CFD analysis for agricultural irrigation equipment: a case study for a mini valve

    Celik, H. K., Rennie, A., Karayel, D. & Akinci, I., 09/2011, p. 59. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  3. Published

    Effect of Thermal and Mechanical Deformation of Metamaterial FDM Components

    Celik, H. K., Tan, Y., Seviour, R. & Rennie, A., 09/2009, US _ TURKEY Workshop on Rapid Technologies (RapidTech 2009). p. 83-88 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  4. Published

    Rapid Prototyping and Flow Simulation Applications in Design of Agricultural Irrigation Equipment: Case Study for a Sample In-Line Drip Emitter

    Celik, K., Karayel, D., Caglayan, N., Rennie, A. & Akinci, I., 06/2010, 11th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Jacobson, D., Rennie, A. & Bocking, C. (eds.). High Wycombe: CRDM Ltd, p. 181-191 11 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  5. Published

    Stress analysis of a sample marine crane’s boom under static loading condition

    Celik, K., Caglayan, N., Cinar, R., Ucar, M., Ersoy, H. & Rennie, A., 06/2012, 5th International Mechanical Engineering Forum 2012: Proceedings of the . Prague, Czech Republic, p. 246-256 11 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  6. Published

    Non-Linear Stress Analysis for the Bolt Connections of A Chisel Tine Using Finite Element Method

    Celik, K., Rennie, A. & Akinci, I., 07/2012, International Conference of Agricultural Engineering (CIGR-AgEng 2012): Proceedings of the . 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  7. Published

    Sizing Optimisation of a Subsoiler Framework using Advanced Engineering Tools

    Celik, K., Rennie, A., Topakci, M. & Akinci, I., 07/2011, Proceedings of the XXXIV CIOSTA CIGR V Conference 2011: Efficient and safe production processes in sustainable agriculture and forestry. 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  8. Published

    Rapid prototyping and flow simulation applications in design of agricultural irrigation equipment: Case study for a sample in-line drip emitter: The paper is to study CFD and RP application samples on the design issues associated with agricultural irrigation equipment

    Celik, K., Karayel, D., Caglayan, N., Rennie, A. & Akinci, I., 03/2011, In: Virtual and Physical Prototyping. 6, 1, p. 47-56 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  9. Published

    Product re-design using advanced engineering applications and function analysis: a case study for greenhouse clips

    Celik, K., Lupeanu, M., Rennie, A., Neagu, C. & Akinci, I., 10/2013, In: Journal of the Brazilian Society of Mechanical Sciences and Engineering. 35, 3, p. 305-318 14 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  10. Published

    Predicting limit draft force for a chisel tine using FEA based simulation

    Celik, K., Rennie, A. & Akinci, I., 09/2013, 5th International Conference Trends in Agricultural Engineering (TAE 2013). p. 112-117 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  11. Published

    Reverse engineering approach for precise measurement of the physical attributes related to the geometric features of agricultural products

    Celik, H. K., Rennie, A. E. W. & Akinci, I., 03/2017, In: Journal of Food Measurement and Characterization. 11, 1, p. 75-84 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  12. Published

    Determination of head losses in drip irrigation laterals with cylindrical in-line type emitters through CFD analysis

    Celik, K., Karayel, D., Lupeanu, M., Rennie, A. E. W. & Akinci, I., 20/02/2015, In: Bulgarian Journal of Agricultural Science. 21, 3, p. 703-710 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  13. Published

    Deformation simulation of a tyre safety cage in testing of agricultural vehicle tyres

    Celik, H. K., Rennie, A. E. W., Dawson, D., Eatough, A., Eatough, J. & Akinci, I., 05/2015, Environmentally Friendly Agriculture and Forestry for Future Generations: International Scientific XXXVI CIOSTA & CIGR Section V Conference 2015. Popov, V. D., Belyakov, V. V., Efimov, V. A., Selikhovkin, A. V., Shirokov, S. N., Ovchinnikova, E. I., Maksimov, D. A., Levchenko, L. V., Smelik, V. A., Ruzhev, V. A., Korostelev, A. A., Lepp, N. V., Shaytarova, O. E. & Belinskaya, I. V. (eds.). St Petersburg, Russian Federation: Saint Petersburg State Agrarian University, p. 172-183 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  14. Published

    Design and structural optimisation of a tractor mounted telescopic boom crane

    Celik, H. K., Rennie, A. E. W. & Akinci, I., 03/2017, In: Journal of the Brazilian Society of Mechanical Sciences and Engineering. 39, 3, p. 909-924

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  15. Published

    Nonlinear FEM based high-speed shell shattering simulation for shelled edible agricultural products: Pecan fruit shattering

    Celik, H. K., Caglayan, N. & Rennie, A. E. W., 10/2017, In: Journal of Food Process Engineering. 40, 5, 8 p., e12520.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  16. Published

    Time-Dependant Human Mastication Simulation of Agricultural Products and Its Rapid Prototyping Aided Evaluation: A Case Study for Pecan Kernel Mastication

    Celik, H. K., Rennie, A. E. W., Er, K., Abram, T. N. & Akinci, I., 27/04/2017. 10 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  17. Published

    Determination of the Failure Susceptibility of a Flat Die used in Biomass Pelletizing Machines by means of FEA based Design Exploration

    Celik, H. K., Yilmaz, H., Rennie, A. E. W., Cinar, R. & Firat, M. Z., 10/2018, In: Journal of Failure Analysis and Prevention. 18, 5, p. 1099-1110 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  18. Published

    Strength-based Design Analysis of a Para-Plow Tillage Tool

    Celik, H. K., Caglayan, N., Topakci, M., Rennie, A. & Akinci, I., 29/02/2020, In: Computers and Electronics in Agriculture. 169, 15 p., 105168.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  19. Published

    Design and Additive Manufacturing of a Medical Face Shield for Healthcare Workers Battling Coronavirus (COVID-19)

    Celik, H. K., Kose, O., Ulmeanu, M-E., Rennie, A., Abram, T. & Akinci, I., 7/08/2020, In: International Journal of Bioprinting. 6, 4, 21 p., 286.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  20. Published

    Effects of Bruising of ‘Pink Lady’ Apple Under Impact Loading in Drop Test on Firmness, Colour and Gas Exchange of Fruit During Long Term Storage

    Celik, H. K., Ustun, H., Erkan, M., Rennie, A. & Akinci, I., 30/09/2021, In: Postharvest Biology and Technology. 179, 13 p., 111561.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  21. Published

    Strength-Based Design Analysis of a Damaged Engine Mounting Bracket Designed for a Commercial Electric Vehicle

    Celik, H. K., Ersoy, H., Dogan, A., Eravci, G., Rennie, A. & Akinci, I., 31/08/2021, In: Journal of Failure Analysis and Prevention. 21, 4, p. 1315-1322 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  22. Published

    A literature review on the linear elastic material properties assigned in finite element analyses in dental research

    Celik, H. K., Koc, S., Kustarci, A. & Rennie, A., 31/03/2022, In: MATERIALS TODAY COMMUNICATIONS. 30, 10 p., 103087.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  23. Published

    The state of additive manufacturing in dental research – A systematic scoping review of 2012–2022

    Celik, H. K., Koc, S., Kustarci, A., Caglayan, N. & Rennie, A., 20/06/2023, In: Heliyon. 9, 6, 13 p., e17462.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  24. Published

    Determining the instantaneous bruising pattern in a sample potato tuber subjected to pendulum bob impact through finite element analysis

    Celik, H. K., Akinci, I., Erkan, M. & Rennie, A., 31/07/2023, In: Journal of Food Process Engineering. 46, 11, 14 p., e14424.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  25. Published

    A Numerical Method-Based Analysis of the Structural Deformation Behaviour of a Turkish String Instrument (Cura Baglama) under Varying String Tensions

    Celik, H. K., Gok, S., Caglayan, N. & Rennie, A., 27/08/2023, In: Applied Sciences. 13, 17, 15 p., 9682.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  26. Published

    Structural Strength Analysis of a Rotary Drum Mower in Transportation Position

    Celik, H. K., Akinci, I., Caglayan, N. & Rennie, A., 16/10/2023, In: Applied Sciences. 13, 20, 18 p., 11338.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  27. Published

    Structural strength analysis of a rotary drum mower during harvesting

    Celik, H. K., Akinci, I., Caglayan, N. & Rennie, A., 16/02/2024, In: Journal of Agricultural Engineering. 55, 1, 23 p., 1557.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  28. Published

    Improved Durability of a Modular Axial Fixator for Stable and Unstable Proximal Femoral Fractures: A Patient-Specific Finite Element Analysis

    Celik, H. K., Icen, M., Ozdemir, H. & Rennie, A. E. W., 9/05/2024, In: Journal of Medical Devices. 18, 1, 22 p., 011007.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  29. Published

    Control systems for WRASPA.

    Chaplin, R., Rahmati, R., Gunura, K., Ma, X. & Aggidis, G. A., 06/2009. 93 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  30. Published

    Engineering FEA Sintering Model Development for Metal Supported SOFC

    Chatzimichail, R., Dawson, R. J., Green, S. M., Sullivan, D., Mukerjee, S. & Selby, M., 23/07/2017, In: ECS Transactions. 78, 1, p. 2773-2783 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  31. Published

    Fibre laser welding of dissimilar alloys of Ti-6Al-4V and Inconel 718 for aerospace applications

    Chen, H-C., Pinkerton, A. J. & Li, L., 02/2011, In: International Journal of Advanced Manufacturing Technology. 52, 9-12, p. 977-987 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  32. Published

    Gap-free fibre laser welding of Zn-coated steel on Al alloy for light-weight automotive applications

    Chen, H-C., Pinkerton, A. J., Li, L., Liu, Z. & Mistry, A. T., 02/2011, In: Materials and Design. 32, 2, p. 495-504 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  33. Published

    Single mode fibre laser welding of dissimilar aerospace alloys

    Chen, H-C., Pinkerton, A. J. & Li, L., 2008, Proceedings of the 3rd Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America, p. 505-510 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  34. Published

    A comparative study of single mode fibre laser and Nd:YAG laser welding of Ti-6Al-4V

    Chen, H-C., Blackburn, J., Pinkerton, A. J., Li, L. & Hilton, P., 2008, Proceedings of the 3rd Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America, p. 163-168 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  35. Published

    Fibre laser welding of Zn-coated steel in Al alloy for next generation lightweight vehicles

    Chen, H-C., Pinkerton, A. J., Li, L. & Mistry, A. T., 2009, Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. Paper P104

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  36. Published

    A micromechanics and machine learning coupled approach for failure prediction of unidirectional CFRP composites under triaxial loading: A preliminary study

    Chen, J., Wan, L., Ismail, Y., Ye, J. & Yang, D., 1/07/2021, In: Composite Structures. 267, 14 p., 113876.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  37. Published

    Micromechanical analysis of UD CFRP composite lamina under multiaxial loading with different loading paths

    Chen, J., Wan, L., Ismail, Y., Hou, P., Ye, J. & Yang, D., 1/08/2021, In: Composite Structures. 269, 13 p., 114024.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  38. Published

    Underwater Cutting of Metals with Photons

    Cheneler, D., Pinkerton, A., Khan, A. & Nyamayaro, C., 3/07/2018.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  39. Published

    2D bio-based nanomaterial as a green route to amplify the formation of hydrate phases of cement composites: Atomistic simulations and analytical characterization

    Chi, Y., Huang, B., Saafi, M., Fullwood, N., Lambert, C., Whale, E., Hepworth, D. & Ye, J., 13/09/2021, In: Construction and Building Materials. 299, 23 p., 123867.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  40. Published

    Wear analysis of failed acetabular polyethylene: a comparison of analytical methods

    Chuter, G. S. J., Cloke, D. J., Mahomed, A., Partington, P. F. & Green, S. M., 02/2007, In: Journal of Bone and Joint Surgery, British Volume. 89B, 2, p. 273-279 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  41. Published

    MATERIALS TESTING AND VOLUMETRIC ANALYSIS OF EXPLANTED ABG I CUP INSERTS

    Chuter, G. S. J., Cloke, D. J., Green, S. M. & Partington, P. F., 1/05/2006, In: Journal of Bone and Joint Surgery, British Volume. 88-B, SUPP II, p. 246 1 p.

    Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review

  42. Published

    Pressure determination approach in specific pressure region and FEM based stress analysis of the housing of an external gear pump

    Cinar, R., Ucar, M., Celik, K., Firat, M. Z. & Rennie, A., 04/2016, In: Experimental Techniques. 40, 2, p. 489-499 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  43. Published

    Effects of joint geometry and bolt torque on the structural performance of single bolt tension joints in pultruded GRP sheet material.

    Cooper, C. & Turvey, G. J., 1995, In: Composite Structures. 32, 1-4, p. 217-226 10 p.

    Research output: Contribution to Journal/Magazine › Journal article

  44. Published

    State dependent parameter model-based condition monitoring for wind turbines

    Cross, P. & Ma, X., 2013, Proceedings of the 10th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies (CM 2013 & MFPT 2013). BINDT, 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  45. Published

    Feature selection for artificial neural network model-based condition monitoring of wind turbines

    Cross, P. & Ma, X., 2013, Proceedings of the 10th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies (CM 2013 & MFPT 2013). BINDT, 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  46. Published

    Model-based condition monitoring for wind turbines

    Cross, P. & Ma, X., 2013, Automation and Computing (ICAC), 2013 19th International Conference on. IEEE, 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  47. Published

    Nonlinear system identification for model-based condition monitoring of wind turbines

    Cross, P. & Ma, X., 11/2014, In: Renewable Energy. 71, p. 166-175 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  48. Published

    Model-based and fuzzy logic approaches to condition monitoring of operational wind turbines

    Cross, P. & Ma, X., 02/2015, In: International Journal of Automation and Computing. 12, 1, p. 25-34 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  49. Published

    Structural integrity monitoring of onshore wind turbine concrete foundations

    Currie, M., Saafi, M., Tachtatzis, C. & Quail, F., 11/2015, In: Renewable Energy. 83, p. 1131-1138 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  50. Published

    Numerical analysis of slender elliptical concrete filled columns under axial compression

    Dai, X. H., Lam, D., Jamaluddin, N. & Ye, J., 04/2014, In: Thin-Walled Structures. 77, p. 26-35 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1 2 3 4 5 6 7 8 ...20 Next

Back to top