Manufacturing

View graph of relations

501 - 600 out of 1,001Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Author last name

Published
Generic model of a community-based microgrid integrating wind turbines, photovoltaics and CHP generations
Ma, X., Wang, Y. & Qin, J., 12/2013, In: Applied Energy. 112, p. 1475–1482 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A novel condition monitoring and real-time simulation system for wind turbines
Ma, X. & Cross, P., 4/02/2013, Proceedings of EWEA 2013 - European Wind Energy Conference & Exhibition. Vienna: EWEA, 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Functional simulation of logic digital system with microprocessor
Ma, X. & Wu, J., 1990, In: Dianli Xitong Zidonghue/Automation of Electric Power Systems. 14, 3, p. 57-64 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Development of communication simulation software for TMS32010 multi-processor parallel system
Ma, X. & Wu, J., 1991, In: Industrial Control Computer. p. 37-39 3 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
University collaboration improves Mimic condition monitoring
Ma, X. & Briddon, M., 23/09/2015, The Motorship Magazine - insight for marine technology professionals.
Research output: Contribution to specialist publication › Featured article
Published
Additive manufacturing enabled synergetic strengthening of bimodal reinforcing particles for aluminum matrix composites
Ma, S., Shang, Z., Shang, A., Zhang, P., Tang, C., Huang, Y., Leung, C. L. A., Lee, P. D., Zhang, X. & Wang, X., 25/05/2023, In: Additive Manufacturing. 70, 103543.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Coefficients for Theory of Adaptive Elasticity and its use in the FEA of remodeling processes in biological tissues
Magatin, R., Ye, J. & Jin, Z., 2009, 3rd International Conference on Mechanics of Biomaterials and Tissues.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Laser surface modification using Inconel 617 machining swarf as coating material
Mahmood, K., Stevens, N. & Pinkerton, A. J., 06/2012, In: Journal of Materials Processing Technology. 212, 6, p. 1271-1280 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Innovative reconsolidation of carbon steel machining swarf by laser metal deposition
Mahmood, K., Syed, W. U. H. & Pinkerton, A. J., 02/2011, In: Optics and Lasers in Engineering. 49, 2, p. 240-247 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Laser metal deposition of steel components using machining waste as build material
Mahmood, K., Khan, A. & Pinkerton, A. J., 2011, Proceedings of CLEO, the IEEE Conference on Lasers and Electro-Optics. New York: IEEE, p. - 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Laser clad corrosion protection for mild and harsh environments
Mahmood, K., Stevens, N. & Pinkerton, A. J., 09/2012, In: Surface Engineering. 28, 8, p. 576-584 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Laser direct deposition of carbon steel machining waste
Mahmood, K., Syed, W. U. H. & Pinkerton, A. J., 2010, Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 1533-1540 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Material-efficient laser cladding for corrosion resistance
Mahmood, K., Stevens, N., Syed, W. U. H. & Pinkerton, A. J., 2011, Proceedings of the 30th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 695-704 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Laser surface cladding of Inconel 617 chips on mild steel
Mahmood, K., Pinkerton, A. J. & Syed, W. U. H., 2011, Proceedings of the 25th International Conference on Surface Modification Technologies. Sudarshan, T. S. (ed.). Valardocs
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Direct laser deposition with different types of 316L steel particle: a comparative study of final part properties
Mahmood, K. & Pinkerton, A., 04/2013, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 227, 4, p. 520-531 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Nucleation of CdTe thin films deposited by close-space sublimation under a nitrogen ambient
Major, J. D., Proskuryakov, Y. Y., Durose, K. & Green, S., 31/05/2007, In: Thin Solid Films. 515, 15, p. 5828-5832 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Microstructure characterisation and process optimization of laser assisted rapid fabrication of 316L stainless steel
Majumdar, J. D., Pinkerton, A. J., Liu, Z., Manna, I. & Li, L., 15/07/2005, In: Applied Surface Science. 247, 1-4, p. 320-327 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Mechanical and electrochemical properties of multiple-layer diode laser cladding of 316L stainless steel
Majumdar, J. D., Pinkerton, A. J., Liu, Z., Manna, I. & Li, L., 15/07/2005, In: Applied Surface Science. 247, 1-4, p. 373-377 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Surface Flatness Measurement in Stereolithography
Male, J. C., Rennie, A. & Bennett, G. R., 06/2000, The Eighth International Conference on Rapid Prototyping: Proc. of. The University of Dayton, p. 111-117 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
First-time demonstration of measuring concrete prestress levels with metal packaged bre optic sensors
McKeeman, I., Fusiek, G., Johnston, M., Saafi, M. B. S., Niewczas, P., Walsh, M. & Khan, S., 24/08/2016, In: Smart Materials and Structures. 25, 9, 10 p., 095051.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
High power all-quantum-dot-based external cavity modelocked laser
McRobbie, A. D., Cataluna, M. A., Zolotovskaya, S., Livshits, D. A., Sibbett, W. & Rafailov, E. U., 19/07/2007, In: Electronics Letters. 43, 15, p. 812-813 2 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Design of a reconfigurable platform for navigation signal simulation
Ming, D., Zhong, X., Ma, X. & Liu, L., 2013.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Design of a reconfigurable platform for navigation signal simulation
Ming, D., Zhong, X., Liu, L. & Ma, X., 2013, In: Journal of Networks. 8, 5, p. 1019-1026 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Residual stresses in laser direct metal deposited Waspaloy
Moat, R. J., Pinkerton, A. J., Li, L., Withers, P. J. & Preuss, M., 15/03/2011, In: Materials Science and Engineering: A. 528, 6, p. 2288-2298 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Crystallographic texture and microstructure of pulsed diode laser-deposited Waspaloy
Moat, R. J., Pinkerton, A. J., Li, L., Withers, P. J. & Preuss, M., 02/2009, In: Acta Metallurgica et Materialia. 57, 4, p. 1220-1229 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Stress distributions in multilayer laser deposited Waspaloy parts measured using neutron diffraction
Moat, R. J., Pinkerton, A. J., Hughes, D. J., Li, L., Withers, P. J. & Preuss, M., 2007, Proceedings of the 25th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Intragranular precipitation variations in laser deposited Waspaloy due to compositional inhomogeneities
Moat, R. J., Karadge, M., Pinkerton, A. J., Deschamps, A., Bley, F., Li, L., Withers, P. J. & Preuss, M., 2007, Proceedings of the 136th TMS Annual Meeting. The Minerals, Metals & Materials Society (TMS), p. 77-86 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Mechanical and Thermal Analyses of Metal-PLA Components Fabricated by Metal Material Extrusion
Mohammadizadeh, M., Lu, H., Fidan, I., Tantawi, K., Gupta, A., Hasanov, S., Zhang, Z., Alifui-Segbaya, F. & Rennie, A., 24/08/2020, In: Inventions — Open Access Journal. 5, 3, 11 p., 44.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Characterisation of the TRIUMF neutron facility using a Monte Carlo simulation code
Monk, S., Abram, T. & Joyce, M., 2015, In: Radiation Protection Dosimetry. 164, 3, p. 228-238 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Surface finishing techniques for SLM manufactured stainless steel 316L components
Morton, W., Green, S., Rennie, A. & Abram, T., 10/2011, Innovative Developments in Virtual and Physical Prototyping: Proc. of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping. CRC PRESS-TAYLOR & FRANCIS GROUP, p. 503-509 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
SME application of LCA-based carbon footprints
Moss, J., Lambert, C. & Rennie, A., 06/2008, In: International Journal of Sustainable Engineering. 1, 2, p. 132-141 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Comparing Carbon Footprint Methodologies for SMEs
Moss, J., Lambert, C. & Rennie, A., 08/2008. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
Published
Encouraging Environmental Responsibility in Small Businesses
Moss, J., Lambert, C. & Rennie, A., 06/2008. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
Physical test data for the appraisal of design procedures for bolted joints in pultruded FRP structural shapes and systems.
Mottram, J. T. & Turvey, G. J., 10/2003, In: Progress in Structural Engineering and Materials. 5, 4, p. 195-222 28 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Semi-rigid behaviour of civil engineering structural connection.
Mottram, J. T. & Turvey, G. J., 1998, COST C1: state-of-the-art review on design, testing, analysis and application of polymeric composite connections. Brussels/Luxembourg: European Commission, p. 99-99 1 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
The dynamic volume changes of polymerising polymethyl methacrylate bone cement
Muller, S. D., Green, S. M. & McCaskie, A. W., 2002, In: Acta Orthopaedica Scandinavica. 73, 6, p. 684-687 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A review on the potential of polylactic acid based thermoplastic elastomer as filament material for fused deposition modelling
Musa, L., Kumar, N. K., Rahim, S. Z. B. A., Rasidi, M. S. M., Rennie, A., Rahman, R., Yousefi Kanani, A. & Azmi, A. A., 30/09/2022, In: Journal of Materials Research and Technology. 20, p. 2841-2858 18 p.
Research output: Contribution to Journal/Magazine › Review article › peer-review
Published
Maximising the buckling loads of symmetrically laminated composite rectangular plates using a layerwise optimisation (LO) approach.
Narita, Y. & Turvey, G. J., 2004, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 218, 7, p. 681-691 11 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Geometry Optimisation of Tools used in Milling of Spherical Surfaces
Neagu, C., Lupeanu, M. & Rennie, A., 07/2011, SIM2011 - Sustainable Intelligent Manufacturing : Proceedings of the 1st International Conference on Sustainable Intelligent Manufacturing. Bartolo, H. (ed.). Leiria, Portugal, p. 87-94 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A new design concept for milling tools of spherical surfaces obtained by kinematic generation
Neagu, C., Lupeanu, M. & Rennie, A., 1/05/2013, In: Applied Mathematical Modelling. 37, 9, p. 6119-6134 16 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effects of scan direction and orientation on mechanical properties of laser sintered polyamide-12
Nelson, J. A., Galloway, G., Rennie, A., Abram, T. & Bennett, G. R., 09/2014, In: International Journal of Advanced Design and Manufacturing Technology. 7, 3, p. 19-25 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of process conditions on temperature distribution in the powder bed during laser sintering of polyamide-12
Nelson, J. A., Rennie, A., Abram, T., Bennett, G. R., Adiele, A., Tripp, M., Wood, M. & Galloway, G., 07/2015, In: Journal of Thermal Engineering. 1, 3, p. 159-165 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Condition monitoring of rotating machines using vibration and bearing temperature measurements
Nembhard, A., Sinha, J., Pinkerton, A. & Elbhbah, K., 2014, Advances in Condition Monitoring of Machinery in Non-stationary Operations: Proceedings of the 3rd International Conference on Condition Monitoring of Machinery in Non-Stationary Operations (CMMN02013). Dalpiaz, G., Rubini, R., D'Elia, G., Cocconcelli, M., Chaari, F., Zimroz, R. & Bartelmus, W. (eds.). Berlin: Springer Verlag, p. 159-169 11 p. (Lecture Notes in Mechanical Engineering).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Combined vibration and thermal analysis for the condition monitoring of rotating machinery
Nembhard, A., Sinha, J., Pinkerton, A. & Elbhbah, K., 05/2014, In: Structural Health Monitoring. 13, 3, p. 281-295 15 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The effect of continuous and pulsed beam modes on cut path deviation in diode laser cutting of glass
Nisar, S., Li, L., Sheikh, M. A. & Pinkerton, A. J., 2010, In: International Journal of Advanced Manufacturing Technology. 49, 1-4, p. 167-175 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The effect of laser beam geometry on cut path deviation in diode laser chip-free cutting of glass
Nisar, S., Sheikh, M. A., Li, L., Pinkerton, A. J. & Safdar, S., 2010, In: Journal of Manufacturing Science and Engineering. 132, 1, 9 p., 011002.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A comparison of cut path deviation with continuous and pulsed beam modes in diode laser chip-free cutting of glass
Nisar, S., Li, L., Sheikh, M. A. & Pinkerton, A. J., 2009, Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 1070-1079 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A new boundary element approach of modeling singular stress fields of plane V-notch problems
Niu, Z., Cheng, C., Ye, J. & Recho, N., 1/08/2009, In: International Journal of Solids and Structures. 46, 16, p. 2999-3008 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Evaluation of the stress singularities of plane V-notches in bonded dissimilar materials
Niu, Z., Ge, D., Cheng, C., Ye, J. & Recho, N., 03/2009, In: Applied Mathematical Modelling. 33, 3, p. 1776-1792 17 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Understanding Fluid-Structure Interaction for high amplitude wave loadings on a deep-draft paired column semi-submersible platform: a finite element approach
Odijie, C. & Ye, J., 9/11/2015.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Effect of vortex induced vibration on a paired-column semisubmersible platform
Odijie, C. & Ye, J., 12/2015, In: International Journal of Structural Stability and Dynamics. 15, 8, 22 p., 1540019.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Wave induced stress profile on a paired column semisubmersible hull formation for column reinforcement
Odijie, C., Quayle, S. D. & Ye, J., 15/07/2017, In: Engineering Structures. 143, p. 77-90 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Design of paired column semisubmersible hull
Odijie, C., 2016, Lancaster University. 205 p.
Research output: Thesis › Doctoral Thesis
Published
Laser surface colouring of titanium for contemporary jewellery
O'Hana, S., Pinkerton, A. J., Shoba, K., Gale, A. W. & Li, L., 03/2008, In: Surface Engineering. 24, 2, p. 147-153 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
From art to engineering
O'Hana, S., Pinkerton, A. J. & Shoba, K., 2007, Proceedings of the 21st International Conference on Surface Modification Technologies. Sudarshan, T. S. & Jeandin, M. (eds.). ASM International
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Kinetics of Aqueous Phase Dehydration of Xylose into Furfural Catalyzed by ZSM-5 Zeolite
O'Neill, R., Ahmad, M. N., Vanoye, L. & Aiouache, F., 6/05/2009, In: Industrial and Engineering Chemistry Research. 48, 9, p. 4300-4306 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Airflow measurement across negatively infiltration processed porous aluminum structures
Otaru, A. J., Morvan, H. P. & Kennedy, A. R., 1/04/2019, In: AIChE Journal. 65, 4, p. 1355-1364 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Numerical modelling of the sound absorption spectra for bottleneck dominated porous metallic structures
Otaru, A. J., Morvan, H. P. & Kennedy, A. R., 1/08/2019, In: Applied Acoustics. 151, p. 164-171 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Investigation of the Pressure Drop Across Packed Beds of Spherical Beads: Comparison of Empirical Models With Pore-Level Computational Fluid Dynamics Simulations
Otaru, A. J. & Kennedy, A. R., 8/04/2019, In: Journal of Fluids Engineering. 141, 7, 9 p., 071305.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Horizon 2020 TWEETHER project for W-band high data rate wireless communications
Paoloni, C., Letizia, R., Napoli, F., Ni, Q., Rennie, A., Zimmerman, R., Andre, F., Pham, K., Krozer, V., Magne, F., Burciu, I., Ramirez, A., Rocchi, M., Marilier, M. & Vilar, R., 2015, Vacuum Electronics Conference (IVEC), 2015 IEEE International . IEEE, 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
In vitro cellular testing of strontium/calcium substituted phosphate glass discs and microspheres shows potential for bone regeneration
Patel, U., Macri-Pellizzeri, L., Zakir Hossain, K. M., Scammell, B. E., Grant, D. M., Scotchford, C. A., Hannon, A. C., Kennedy, A. R., Barney, E. R., Ahmed, I. & Sottile, V., 1/03/2019, In: Journal of Tissue Engineering and Regenerative Medicine. 13, 3, p. 396-405 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A biomechanical study comparing a raft of 3.5 mm cortical screws with 6.5 mm cancellous screws in depressed tibial plateau fractures
Patil, S., Mahon, A., Green, S., McMurtry, I. & Port, A., 06/2006, In: Knee. 13, 3, p. 231-235 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Hybrid optical-fibre/geopolymer sensors for structural health monitoring of concrete structures
Perry, M., Saafi, M., Fusiek, G. & Niewczas, P., 24/02/2015, In: Smart Materials and Structures. 24, 4, 8 p., 045011.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Wireless surface acoustic wave sensors for displacement and crack monitoring in concrete structures
Perry, M., McKeeman, I., Saafi, M. B. S. & Niewczas, P., 22/02/2016, In: Smart Materials and Structures. 25, 3, 9 p., 035035.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Social Design Fiction. New Methods for the Design of Emerging Technology.
Pilling, M., Richards, D., Dunn, N. & Rennie, A., 31/05/2019, In: The Design Journal. 22, sup1, p. 1993-2005 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Modelling the temperature effects of melt pool position and wall height in additive manufacturing by direct laser deposition
Pinkerton, A. J. & Li, L., 2003, Proceedings of the 1st International Conference on Advanced Research in Virtual and Rapid Prototyping. Bartolo, P. J., Mitchell, G., Mateus, A., Batista, F., Vasco, J., Correia, M., Andre, N., Lima, P., Novo, P., Custodio, P. & Martinho, P. (eds.). Leiria: Escola Superior Tecnologia Gestao Leiria, p. 224-231 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Component repair using laser direct metal deposition
Pinkerton, A. J., Wang, W. & Li, L., 07/2008, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 222, 7, p. 827-836 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Theoretical analysis of the coincident wire-powder laser deposition process
Pinkerton, A. J., Syed, W. U. H. & Li, L., 12/2007, In: Journal of Manufacturing Science and Engineering. 129, 6, p. 1019-1027 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An analytical model of beam attenuation and powder heating during coaxial laser direct metal deposition
Pinkerton, A. J., 2007, In: Journal of Physics D: Applied Physics. 40, 23, p. 7323-7334 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Thermal and microstructural aspects of the laser direct metal deposition of waspaloy
Pinkerton, A. J., Karadge, M., Syed, W. U. H. & Li, L., 08/2006, In: Journal of Laser Applications. 18, 3, p. 216-226 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An experimental and theoretical investigation of combined gas- and water-atomized powder deposition with a diode laser
Pinkerton, A. J., Syed, W. U. H. & Li, L., 2006, In: Journal of Laser Applications. 18, 1, p. 73-80 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Multiple-layer laser deposition of steel components using gas- and water-atomised powders: the differences and the mechanisms leading to them
Pinkerton, A. J. & Li, L., 15/07/2005, In: Applied Surface Science. 247, 1-4, p. 175-181 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Direct additive laser manufacturing using gas- and water-atomised H13 tool steel powders
Pinkerton, A. J. & Li, L., 2005, In: International Journal of Advanced Manufacturing Technology. 25, 5-6, p. 471-479 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An experimental and numerical study of the influence of diode laser beam shape on thin wall direct metal deposition
Pinkerton, A. J. & Li, L., 2005, In: Journal of Laser Applications. 17, 1, p. 47-56 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Modelling the geometry of a moving laser melt pool and deposition track via energy and mass balances
Pinkerton, A. J. & Li, L., 21/07/2004, In: Journal of Physics D: Applied Physics. 37, 14, p. 1885-1895 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The development of temperature fields and powder flow during laser direct metal deposition wall growth
Pinkerton, A. J. & Li, L., 05/2004, In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 218, 5, p. 531-541 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An analytical model of energy distribution in laser direct metal deposition
Pinkerton, A. J. & Li, L., 2004, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 218, 4, p. 363-374 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Multiple-layer cladding of stainless steel using a high-powered diode laser: an experimental investigation of the process characteristics and material properties
Pinkerton, A. J. & Li, L., 1/04/2004, In: Thin Solid Films. 453-454, 2, p. 471-476 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The behaviour of water- and gas-atomised tool steel powders in coaxial laser freeform fabrication
Pinkerton, A. J. & Li, L., 1/04/2004, In: Thin Solid Films. 453-454, 2, p. 600-605 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Modelling powder concentration distribution from a coaxial deposition nozzle for laser-based rapid tooling
Pinkerton, A. J. & Li, L., 02/2004, In: Journal of Manufacturing Science and Engineering. 126, 1, p. 33-41 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The significance of deposition point standoff variations in multiple-layer coaxial laser cladding (coaxial cladding standoff effects)
Pinkerton, A. J. & Li, L., 05/2004, In: International Journal of Machine Tools and Manufacture. 44, 6, p. 573-584 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Process characteristics and effects of gas- and water-atomized stainless steel powders in laser-based rapid tooling
Pinkerton, A. J. & Li, L., 08/2003, In: Journal of Laser Applications. 15, 3, p. 172-178 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effects of powder geometry and composition in coaxial laser deposition of 316L steel for rapid prototyping
Pinkerton, A. J. & Li, L., 2003, In: CIRP Annals - Manufacturing Technology. 52, 1, p. 181-184 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Rapid prototyping using direct laser deposition - the effect of powder atomization type and flowrate
Pinkerton, A. J. & Li, L., 2003, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 217, 6, p. 741-752 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An investigation of the effect of pulse frequency in laser multiple-layer cladding of stainless steel
Pinkerton, A. J. & Li, L., 2003, In: Applied Surface Science. 208-209, p. 405-410 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The effect of laser pulse width on multiple-layer 316L steel clad microstructure and surface finish
Pinkerton, A. J. & Li, L., 15/03/2003, In: Applied Surface Science. 208-209, p. 411-416 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Guest Editorial: The 36th MATADOR Conference 2010
Pinkerton, A. J., 2012, In: Materials and Manufacturing Processes. 27, 4, p. 363-363 1 p.
Research output: Contribution to Journal/Magazine › Editorial › peer-review
Published
Laser and electron beams - evolving tools for surface engineering
Pinkerton, A. J., 04/2009, In: Surface Engineering. 25, 3, p. 177-179 3 p.
Research output: Contribution to Journal/Magazine › Editorial › peer-review
Published
Laser rapid manufacturing process advancement through powder morphology
Pinkerton, A. J., 2002.
Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review
Published
A method and model for pulsed laser cleaning of rapid manufactured parts
Pinkerton, A. J. & Li, K., 2007, Proceedings of the 21st International Conference on Surface Modification Technologies. Sudarshan, T. S. & Jeandin, M. (eds.). ASM International
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Direct laser deposition layer profiles and the factors affecting them
Pinkerton, A. J. & Li, L., 2002.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
A verified model of the behaviour of the axial powder stream concentration from a coaxial laser cladding nozzle
Pinkerton, A. J. & Li, L., 2002, Proceedings of the 21st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A comparative study of multiple layer laser deposition using water and gas atomised 316L stainless steel powders
Pinkerton, A. J. & Li, L., 2002, Proceedings of the 21st International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The effect of diode laser beam shape and traverse direction on the direct metal deposition process
Pinkerton, A. J. & Li, L., 2003, Proceedings of the 22nd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Direct metal deposition by diode laser: modelling the effect of increased beam coupling
Pinkerton, A. J. & Li, L., 2003, Proceedings of the 22nd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Diode laser deposition of microstructurally graded components using gas- and water-atomised powder blends
Pinkerton, A. J., Syed, W. U. H. & Li, L., 2004, Proceedings of the 23rd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The effect of process parameters on residual stresses within an inconel 718 part produced by the Direct Laser Deposition process
Pinkerton, A. J., Shackleton, J., Moat, R., Li, L., Withers, P., Preuss, M., Allen, J., Hilton, P. & Folwell, R., 2005, Proceedings of the 24th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 601-610 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Explaining microstructural and physical variations in rapid additive manufactured waspaloy parts through the laser-deposition thermal cycle
Pinkerton, A. J., Syed, W. U. H., Karadge, M. & Li, L., 2005, Proceedings of the 24th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 822-831 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Alternative nozzle and metal delivery methods for laser-assisted metal deposition: (invited paper & presentation)
Pinkerton, A. J., 2005.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Diode laser metal deposition: The effect of pulsed beam parameters on superalloy microstructure and deposit morphology
Pinkerton, A. J., Moat, R. J., Li, L., Preuss, M. & Withers, P., 2006, Proceedings of the 25th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Previous 1 2 3 4 5 6 7 8 9 ...11 Next

Research

Manufacturing

Quick Links

Connect With Us